10
156 in. Wheel Base, Automatic Power Stroke V8 Turbo Diesel, RHINO Liner, 6- disc CD Player, Cloth Interior, Power Seats, Gooseneck Hitch, REESE Ball Hitch, LT275/ 70R18 Tires, ND Tags 618 BTU, Exp. 12/2018, 105,029.8 Indicated Mileage.
11
158 in. Wheel Base, Automatic Power Stroke V8 Turbo Diesel, CD Player, ALCOA Aluminum Wheels, Ball Hitch, LT 235/85R16 Tires, MN Tags YAW5885 Exp. 02/2019, 183,376 Indicated Mileage, (NOTE: Needs New Oil Pan, Area of Rust at Both Ends of the Rear Bumper.)
12
162 in. Wheel Base, 5-Speed Manual Power Stroke V8 Turbo Diesel, CD Player, Electronic Brake Controller, Chrome Step Bars, having an 8 ft. wide x 9 ft. 4 in. long Steel Flat Bed Deck, with Headache Rack and Gooseneck Ball Hitch, REESE Ball Hitch, LT 235/8…
13
14,000 lbs. GVWR, 102 in. wide x 24 ft. long Loading Deck, having 64 in. long Beaver Tail Loading Ramp, with 3- 55 in. long x 16 in. high (approx.) Folding Loading Ramps, Dual Front Crank-Down Landing Gear, ST 235/85R16 Tires ND Tags T177195 Exp. 12/2018.
14
14,000 lbs. GVWR, 101 in. wide x 23 ft. 4 in. long Loading Deck, having 64 in. long Beaver Tail Loading Ramp, with 3- 55 in. long x 16 in. high (approx.) Folding Loading Ramps, Dual Front Main Crank-Down Landing Gear, ST 235/85R16 Tires, MN Tags CBT0145, …
15
2,990 lbs. GVWR, Having Curb Side Forward Positioned Man Hinged Door, Full Bottom Hinged Spring Counter Weighted Fully Opening Rear Door, Single Axle; 1,340 lbs. Empty Weight, 2,990 GVWR, 6ft. Wide x 12 ft. long x 6' tall; SD Tag T177194.
16
Powered by 43 HP YANMAR 2.0 L, 4- Cylinder Diesel Engine, Roll-Over Protection Bar/Cage, 17.5L-24 Rear and 10-16.5 Front Tires, having a Model 460 Front Loader Attachment with 73 in. wide General Purpose Bucket, Pintle Hitch Attachment installed on 3- Poi…
17
67 HP, 2- Speed Super Boom, (CARLSON TRACTOR & EQUIPMENT CO. Unit No. 11890); 12- 16.5 NHS Tires, 1,179 hours.
18
84 in. wide General Purpose Bucket (CARLSON TRACTOR & EQUIPMENT CO., Unit No. 12161).
21
For NEW HOLLAND Skid Steer Loader, 540 rpm, with Pintle Hitch. (NOTE: Used to Test the GLENMAC-HARLEY Units.)
23
VG Condition. (NOTE: Was used as the/a Demonstration Unit.) With 3- Point Tractor Hitch.
24
VG Condition. (NOTE: Was used as the/a Demonstration Unit.) With 3- Point Tractor Hitch and Operators Manual Male End with U-Joint and Safety Guard with PTO Shaft, 540 rpm, 2 ft. long (approx.).
30
8,000 lbs. capacity, Type A2 / Forks having 3- Stage Mast, Hydraulic Side Shift 48 in. long Forks, Foam-Filled Tires, Operators ROPS Canopy, 4,639 Indicated Meter Hours.
31
3,750 lbs. capacity; 3- Stage Mast, Model GC55F-SSS-A052, 188 in. Lift height, Hydraulic Side Shift Forks, Operators ROPS Canopy having Glass Front and Rear Panels, 2- Hinged Side Doors to provide Cold Weather Enclosed Cab, 7,095 Indicated Meter Hours. (N…
32
4,150 lb. capacity, 3- Stage Mast having Hydraulic Side Shift, Solid Tires, Operators ROPS Canopy, 1,012.8 Indicated Meter Hours.
33
3,000 lb. capacity, Hydraulic Side-Shift Forks, 183 in. Lift height, 3- Stage Mast, Operators ROPS Canopy, 10,339.7 Indicated Meter Hours; With EXIDE BATTERY CHARGER, SELF START/STOP, AUTOMATIC BATTERY SELECTION: Load Hog LH1-18-850 208/240/480 VAC, 40/36…
34
For Forklift Truck, 1- Pair is 10 ft. long, 1- Pair is 5 ft. 6 in. long.
35
Powered by KUBOTA 25 hp Diesel Engine, having 5 ft. wide (approx.) Front Mounted Mower Attachment, Operators ROP Bar, 389.9 Indicated Meter Hours. (NOTE: Used to test Mower Attachments.)
37
With MILLER Axcess-S 40 V Wire Feeder, s/n LE037020, Stock No. 195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.
38
With MILLER Axcess-S 40 V Wire Feeder, s/n LE051274, Stock No. 195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.
39
With MILLER Axcess-S 40 V Wire Feeder, s/n LE051256, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.
40
With MILLER Axcess 40 V Wire Feeder, s/n LE037002, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.
41
With MILLER Axcess 40 V Wire Feeder, s/n LE051266, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.
43
With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LC236495, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)
44
With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LC221233, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)
45
With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LE275716, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)
46
150 volt, 100 amp, 3- Phase, 600 Hz; With Cutting and Power Leads and Gun, mounted on a 4- Wheel Cart.
47
Consisting of but not necessarily limited to: 2- Coils Welding Grounding Cables 15 ft. long (est.), Welding Grounding Cables 10 ft. long (est.), Heavy Duty, 10 AWG, 4/C, 600 V, having End Fitting on Both Ends, 15 ft. Length, (est.).
48
Consisting of but not necessarily limited to: 3- Boxes SUPER ARC .045 in. (1.1 MM) l-56, ED011659, 60 lb. Coil; 2- Boxes SUPER ARC .035 in. (0.9 mm), L-56, ED021274, 44 lb. Coil; 1- Box NATIONAL STANDARD .045 in. Type NS-115CU, 45 lbs.; 1- Box STOODY 965-…
52
Each with Filters Installed, 5- (approx.) Filters (apparently New and Used in Boxes), 1- Wood Crate of Hoses and Fittings. (NOTE: 1- is installed, suspended from the Ceiling in the Welding Cell Area; 4- are uninstalled, stored in the Northeast Corner Room…
53
Consisting of but not necessarily limited to: 1- THERMCO Gas Mixer, Model 8500CA50X1100, s/n 24215 (Mfg. 02/2004); Argon and Carbon Dioxide Supply Gases. With WESTERN INNOVATOR Portable Bulk Gas Manifold, Model LCHP-3-2, s/n 27768, (Mfg. 02/2004); WESTERN…
55
Consisting of but not necessarily limited to: 1- Box, 6- VISE GRIP 11R Welding Clamps; 1- Box 3- C- Clamps: 1- 6 in., 1- 7 in. 1- 9 in. (est.) and 1- Slide Adjustable Clamp; 1- Box, 3- VG 6R Welding Clamps: 1- VG 11R; 1- VG 11-R Deep Throat Welding Clamps…
58
With 11 (approx.)- VISE GRIP C-CLAMPS, WELDING 6R and 6SP; With 15 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R; With 4 (approx.)- STRONG HAND AND STABIL AND WILTON C-CLAMPS, WELDING UG125 and 606; With STRONG HAND C-CLAMP, WELDING 2400 S-4; With 10+ (appro…
59
1- is similar to Model NSX 3500 and 1- is Undetermined. (NOTE: 1 is missing power cord.)
60
Consisting of but not necessarily limited to: 1- Welding and Work Table, Heavy Duty, 40 in. high x 36 in. deep x 48 in. long having Lower Shelf and 1/2 in. Plate Steel Top. WILTON V230 (est.) Vise.
61
With 8 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R; With 8 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R; With 3 (approx.)- VISE GRIP C-CLAMPS, WELDING 18 R, 18 SP, & Modified 11R; With 6 (approx.)- VISE GRIP AND STRONG HAND C-CLAMPS, WELDING: Consisting of b…
62
Consisting of but not necessarily limited to: 1- WESTWARD 5 Drawer Tool Cabinet, mounted on Castering Wheels; 1- Tool Box, Hand Tools consisting of 2- Squares 2- Tri-Squares, Air Grinder, Wrenches, Mallets and related; 1- Material Table, Steel, 25 in. x 3…
63
Steel Frame, 6 ft. high x 28 ft. total (approx. ) Linear Feet, having 4 ft. long (est.) Folding Wings on Each End.
64
38 in. high x 40 in. wide x 60 in. long (approx.) having 1/2 in. tall Top Plate.
65
With 3 (approx.)- VISE GRIP AND STRONG HAND C-CLAMPS, WELDING: 11R Consisting of but not necessarily limited to: 2- Vise GRIP 18R; 1- STRONG HAND UG125; With 8 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R; With 8 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R.
66
Consisting of but not necessarily limited to: WESTWARD 5- Drawer Portable Tool Chest with Hand Tools: Ball Peen Hammer; 2- VISE GRIP Pliers; Air Powered Hand Grinder; FOWLER Micrometer; Z36 Abrasive Disk, 1- Wood Work Table, 1- Metal Stool and 1- Portable…
68
Consisting of but not necessarily limited to: 3- Incandescent Lights with Reflectors; 3- (est.) Electrical Power Extension Cords and 1- Power Strip.
69
With FLOW-PRO FAN 20 in. (approx.) Pedestal Mounted; With OCEAN FAN 18 in. (approx.) Floor/Table Mount; With 2- LAKEWOOD FANS 18 in. (approx.); With NS INDUSTRIAL FANS 20 in. (approx.); With PATTON FAN 20 in. (approx.); With 2- FANS 18 in. (approx.).
71
37 in. high x 59 in. wide x 60 in. long (approx.) having 3/4 in. tall Plate Top, 4- Legs.
72
With 28 (approx.)- VISE GRIP AND JONESWAY C-CLAMPS, WELDING: VISE GRIP Model 6R Welding C-Clamps; Jonesway CR-MO Welding C-Clamps. With 10 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R; With 4 (approx.)- VISE GRIP C-CLAMPS, WELDING: 11R Each has Modified End…
73
With 5 (approx.)- VISE GRIP C-CLAMPS, WELDING 11R and 11SP; With 4 (approx.)- VISE GRIP C-CLAMPS, WELDING 18R; With 4 (approx.)- STRONG HAND C-CLAMPS, WELDING UG125; With 4 (approx.)- STRONG HAND C-CLAMPS, WELDING UG125; With 2 (approx.)- WILLIAMS C-CLAMP…
74
1- Work Table, 6 ft. long; 1- Work Table 42 in. long; 1- 2- Step Work Stand, with 1- AM/FM Radio Cassette Player.
75
5- boxes plus items, Consisting of but not necessarily limited to: 2- Fiber-Metal Full Cover Face Shields; Socket and Ratchet Wrench Set; 2- Hammer Punch Set; 2- Plastic Mallets; 2- Hammers - 1- is Claw, 1- is Ball; Welding Aprons, Gloves, Level, Measurin…
76
Consisting of but not necessarily limited to: 1- TIGRIP Model SK-TBL 1.0, (Mfg. 1997), capacity - 0-20, Plate Grip; 2- Chain 4- Way; 4- (est.) Fabric Lift Straps; 6- (approx.) S-Hooks.
77
Consisting of but not necessarily limited to: 10- (est.) Hoses, 1- is Coiled, Most have QC End Fittings; 7- Air Guns - 4- have 2 ft. long (est.) Extensions.
78
Consisting of 2- Regulators, Torch; Hoses; Face Shield and Gas Bottle Cart (NOTE: GAS BOTTLES ARE NOT ITEMS OF THE SET.); With OXY - ACETYLENE TORCH CUTTING AND WELDING SET: Consisting of 2- Regulators, Torch; Hoses; and Gas Bottle Cart (NOTE: GAS BOTTLES…
80
Consisting of but not necessarily limited to: 20- Dies (approx.), Assorted from 1 ft. to 8 ft. long (est.), NOTE: Stored in Multiple Places including Portable Die Truck, in a Side-Positioned Storage Rack and on the Back of the Unit.
81
4- Bay, 5- Tier Storage Arms, 24 in. tall x 20 ft. long, x 60 in. deep (est.). (NOTE: Item on Rack with Lot 80 Tag is NOT included.)
82
Powered by 3 hp Electric Motor; with 1- 10 ft. 8 in. long Roller Equipped In-Feed Table; 1- 5 ft. 5 in. long Roller Equipped Out-Put Table.
83
Powered by 2 hp Electric Motor with 1- 175 in. long Roller Equipped In-Feed Table.
84
Powered by 2- hp (est.) Electric Motor with 1-7 ft. 2 in. Roller Equipped In-Feed Table.
85
40 in. high x 24 in. wide x 18 ft. long, having Top Mounted, Full Length Gravity Roller Conveyor, 6- Classification Levels, Center Divided with Cantilevered Arms and Shelves.
87
15 in. Swing, 2 in. Hollow Spindle, 45 in. (approx.) Center-to-Center, with 10 in. dia. 3- Jaw Chuck, Hardened Bed Ways, NEWALL Model DP7 Digital Read-Out System.
88
32 in. (approx.) Center-to-Center, with 7 in. dia., 3- Jaw Chuck, 1-1/2 in. dia. (approx.) Hollow Spindle, with 1- 8 in. dia. 4- Independent Jaw Chuck; 1- box Misc. Tooling.
89
ACU-RITE 5, 9 in. x 42 in. T-Slotted Bed, with ACU-RITE III Digital Read-Out System.
90
Consisting of but not necessarily limited to: 4- Chucks, 20-(approx.) Twist Drills, 16- Collets, Hammer, Wrenches, Flat Files, MLIC Hold-Down Kit, Air Powered Grinder and Related.
91
Consisting of but not necessarily limited to: 1- 3- Shelf Metal Storage Cabinet, 3- Head Stock Face Plates, 1- 4 in. dia. (est.) Chuck, 2- Boxes Tools Containing 6- (approx.) End Mills, (NOTE: Appear to be New/Unused) and Related Items.
92
Consisting of but not necessarily limited to: 1- FLEXARM Air Tool Grinder Head having Parallelogram Extension Arm s/n 018041; With JET DRILL PRESS, BENCH-TYPE, 15 IN.; Model J-2530, 15 in. s/n 16070684 (NOTE: Lots 92 and 94 are mounted on Heavy Duty Porta…
93
Having VCRO-KUEL x & y Adjusting Work Table with Vise, powered by 1-1/2 hp Electric Motor.
94
Stock No. 354068, with JACOBS 34-33 33 Taper Chuck, mounted on Portable Steel Stand.
95
8- Spindle Speeds, with Intermediate Adjustable Height Work Table, JACOBS 3A3 Taper Chuck.
96
Consisting of but not necessarily limited to: 3 ft. high x 4 ft. long (approx.) Steel Work Table with 4 ft. x 5 ft. (approx.) Backboard having Twist Drills, Taps, Adjustable Pipe Wrench and related.
100
Powered by 1/3 hp Electric Motor, 1- 6 in. dia. and 1-8 in. dia. Grinding Wheel, mounted on Single Floor Type Pedestal.
101
With 12 in. dia. Disc, 6 in. x 21 in. Belt, powered by 1/2 hp Electric Motor s/n 90190, Single Pedestal, Floor Mount.
102
Powered by 1/3 hp Electric Motor mounted on Single Pedestal Floor Stand.
104
On Castor Wheels, with Contents consisting of but not necessarily limited to: Flat Files, Hammers, Tapes, Screw Drivers, Wire Brushes and related.
105
Consisting of but not necessarily limited to: 1- 3 in. high x 18-1/2 in. deep x 24 in. long Granite Block, 2- Combination Squares, 1- 23 ft. long Square, 1- Inside/Outside Caliper, 1- Height Caliper, 1- Center Locating and Protractor Combination Square, 1…
109
Consisting of but not necessarily limited to: 4- Band Saw Blades, 1- is BAHCO, 2- are LENAX, all appear to be 12 ft. 10 in. x 1 in. x .035; 4- 6 in. dia. Wheels having Polyester Tires.
110
Having Banding Supply Reel, 2- Tensioning Tools, 2- Crimping Tools, 1- Metal Snips.
111
Mounted on a 35 in. high x 30 in. wide x 30 in. deep Steel Table.
112
Having MAXIM Hydraulic Cylinder, 3, 000 psi, 3.5 in. Bore, 12 in. Stroke, 1.75 in. Rod dia.
113
Consisting of but not necessarily limited to: Medical First Aid Cabinet, Steel, Wall mounted with Related Contents; Storage Cabinet, Steel 6 ft. long (approx.) with Contents of 3M Yellow Ear Plugs, Work Gloves, Tap and Die Set (incomplete); 4- DEWALT 90 G…
114
With 12 (approx.)- UNIT TOOL PUNCH ATTACHMENTS: HH2-1/2, C- Type In Wood Crate, (NOTE: 2- are in Wood Crate to the right); With UNI PUNCH MISCELLANEOUS CHUCK JAWS 8A 1-1/2 Contained in 2 Wood Crates; With RECTANGULAR TUBING PIECES AND RELATED, STEEL; With…
115
With TRU-STONE CORPORATION GRADE B GRANITE BLOCK: 5374 9 in. high x 43 in. wide x 52 in. long, mounted on Steel 4- Leg Base. With PRECISION GRANITE CO. GRADE B GRANITE BLOCK: D-64 (Date Mfg. 2/22/1991) 3-1/4 in. high x 18 in. wide x 24 in. long, Overall A…
116
With WELDING TABLE, HEAVY DUTY: 36 in. high x 48 in. wide x 56 in. deep, having 3/4 in. tall Plate Steel Top, 4- Legs; With WELDING TABLE, ADJUSTABLE: 35-1/2 in. high x 42 in. x 42 in., constructed from 2 in. x 2 in. Square Steel Tubing; with 1- in. tall …
117
Consisting of but not necessarily limited to: 16- Model 11R; 2- 6R; 2- Modified 'Deep Throat'.
118
With 6 (approx.)- WILTON ADJUSTABLE WELDING C-CLAMPS: Consisting of but not necessarily limited to: 1- SQ12; 1- 610; 1- SQ8; 3- SQ6 (approx.); With 5 (approx.)- STRONG HAND ADJUSTABLE WELDING C-CLAMPS: UG125 (NOTE: Very Good Condition-appears to be Unused…
119
38 in. high x 42 in. deep x 80 in. long having Steel Top, 1- Shelf with BABCO 616 Vise.
120
Consisting of but not necessarily limited to: Indexing Head, Coil Springs, Combination Wrench Set, Wire Brush, (NOTE: New/Unused), Welders and Work Gloves (NOTE: New/Unused), AM/FM Radio Cassette Player and Related; With 12 (approx.)- HAND AND POWER TOOLS…
121
Powered by 3/4 hp Electric Motor, with 2- Wire Brush Wheels, Single Pedestal, Floor Mounted.
122
Consisting of but not necessarily limited to: Tractor Draw Bars, Drag Links, Hoses, 2- 32 in. long Draw Bars (1- appears Unused); 1- 26 in. long Draw Bar; 1- JS2024R Top, Cat. II, 1 in. dia. x 29 in. long Adjustable Drag Link (appears Unused) Folding Leg …
123
Ramp is 0-39 in. high and is adjustable, 12 ft. 8 in. long x 7 ft. 8 in. wide (approx.).
124
Consisting of but not necessarily limited to: 2- Cantilevered Storage Racks: 1- is 6 ft. high x 4 ft. deep x 8 ft. 3 in. long and 1- is 6 ft. high x 4 ft. deep x 82 in. long.
126
21 in. high x 40 -1/2 in. deep x 60 in. wide, having Forklift Pockets, with 1- Pallet, 1- Wood Crate and Miscellaneous Contents.
127
Consisting of but not necessarily limited to: Refrigerator; 2- Microwave Ovens, 1- SHARP Carousel and 1- KENMORE; 3- 6 ft. long Folding Leg Tables; 19 - Stacking Chairs; 12- Folding Chairs, Steel; 1- 5 ft. long Flag; FUNAI VHS Player.
128
With 5 (approx.)- FLOOR PUSH BROOMS; With 7 (approx.)- HAND TOOLS: Consisting of but not necessarily limited to: 1- Square Point Shovel; 1- Snow Scraper; 1- Garden Rake; 3- Brooms.
129
Consisting of but not necessarily limited to: 2- Boxes containing LIFT ALL Load Huggers, 3,333 lbs. Work Load Limit, 10,000 lbs. Assembly Break Limit Cargo Straps; 5- Cargo Strap Ratchet Assemblies; 6 + Pieces of Chain, Chain Boomer, Cargo Netting, Flat B…
130
Consisting of but not necessarily limited to: 1- WESTWARD 5- Drawer Tool Chest with Miscellaneous Contents, 1- NAPA and 1- CAMPBELL HAUSFELD 1/2 in. Air Powered Impact Wrench, 6- Combination Wrenches, Metal Storage Shelf with Tap and Die Wrench, 2- Boxes …
131
Consisting of but no necessarily limited to: 1- Dust Pan with 3- Hand Brushes, Florescent 'Drop Light' with Extension Cord, Multi-Bin Fastener Cabinet, Plastic Parts Bins, Consumable Aerosol Supplies.
133
3- Crates, Wood, consisting of but not necessarily limited to: 1- Box containing Metal Storage Shelving Components; 2- Boxes containing Unidentified Contents. With 4- pallets MISCELLANEOUS CONTENTS: Consisting of but not necessarily limited to: 1- DANLY W…
136
AND MARTECH Quality Air Breathing System 1- Abrasive Media Pot, 1- Abrasive Hood, 1- Rack with 40- (approx.) Material 'S' Hook Hangers.
137
A- Frame Type, 6 ft. high x 4 ft. wide x 80 in. long.
138
64 in. high x 68 in. wide x 14 ft. long (NOTE: The length is adjustable to shorter distance-current set-up appears to be near max extension capability).
139
On 4- Wheels, 59 in. high x 78 in. wide x 60 in. depth (approx.).
140
3- are 50 in. high x 34 in. wide x 72 in. long.
141
On 4- Wheels, 38 in. high x 5 ft. wide x 12 ft. long (approx.).
142
On 4- Wheels, 22 in. high x 6 ft. wide x 5 ft. 8 in. long (approx.) Drop-Center Design.
143
2- are 32 in. high x 85 in. long (approx.) 2 - are 30 in. high x 83 in. long (approx.); 1- U-Frame Stand, Adjustable Width.
144
On 4- Wheels, 29 in. high x 2 ft. wide x 50 in. long (approx.).
145
On 4- Wheels, 29 in. high x 2 ft. wide x 50 in. long (approx.).
146
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
147
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
148
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
149
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4- Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
150
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4- Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
151
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.
152
Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long; 1- 44 in. high x 24 in. wide x 72 in. long and 1- 44 in. high x 18 in. wide x 38 in. long (approx.) having Ex…
153
Medium Duty, 2- are 35 in. high x 24 in. wide x 36 in. long, (approx.) on 4- Castering Wheels; 1- is 32 in. high (approx.); With MATERIAL HANDLING CART, PLATFORM, RAILROAD DOCK TYPE: On 4- Wheels, Wood Deck, Push Hand Bar on 1- end.
154
With Solid Plate Steel Top, mounted on 4- Wheels, 44 in. high x 24 in. wide x 51 in. long (approx.).
155
36 in. high x 46 in. wide x 84 in. long (approx.) and 1- 74 in. tall Post having 4 in. dia. Steel Ring at Top, 9 in. x 97 in. long Channel Steel Base.
156
48 in. high x 37 in. wide x 24 in. long, T-Shaped Base. With 2- CUSTOM DESIGNED AND FABRICATED HORIZONTAL AXIS, WORK POSITIONING / WELDING WORK HOLDING JIGS, MANUALLY OPERATED: 49 in. high x 48 in. wide x 28 in. deep T-Shaped Base constructed from 9 in. C…
157
Having 22 in. x 19 in. T-Shaped Base, HARLEY Independent Hydraulic Power Unit with 1- 20 in. dia. (approx.) Circular, Rotating Attachment Plate.
158
having Crank Type Hand Fluid Pump, Filter Cartridge, mounted on 40 in. high (approx.) 4- Leg Steel Stand.
159
3- are Adjustable Height, Steel; 3- have Roller Heads; 4- have Ball Bearing Heads; 1- has Max Height of 52 in.; Most have Working Height of 32 in.
160
Each Side having 9- Inclined Shelves, 65 in. high x 25 in. deep x 36 in. wide (approx.) (NOTE: Empty, No Contents.).
161
125 psig, 83 cfm max, 460/3/60 Electrical Supply Requirements, 29,550.6 Indicated Meter Hours; With INGERSOLL RAND AIR DRYER, REFRIGERATED: DS100 2757960002 115/1/60 Electrical Supply Requirements; With STEEL-AB VERTICAL AIR RECEIVER TANK: Nat. Bd. No. 37…
162
Non-Cycling Refrigerated Air Dryer Mounted on 120 gal. (est.) Horizontal Air Receiver Tank.
163
Powered by HONDA GX200 Air Cooled Gasoline Engine. 2- Horizontal Air Receiver Tanks, mounted on Pneumatic Tires.
168
1- having Portable, Octagonal Base, and Pneumatic Tires, and 1- having Solid Tires; Dolly, 60 Corner, with 4- Castering Wheels; With BARREL HAND TRUCK For 55 gal. Barrels, 1000 lbs. capacity.
169
Solid Sides and Shelves, Open Back, Each Bay/Section is 7 ft. high x 2 ft. deep x 3 ft. wide, each having 5- Shelves, with Contents of Assorted Plastic Parts Bin Boxes.
170
5- Bays/Sections, each is 12 ft. high x 42 in. Deep x 10 ft. long having 3- Shelves Floored with Multiple Boards 2 in. x 6 in. (approx.).
171
OEM Shipping, Wood, 112 in. x 6 in. height x 60 in. wide (approx.) (NOTE: Appears to be New/Unused).
173
Consisting of but not necessarily limited to: 1- U-Line, Model LAC-1260, 26 lbs. capacity; 1- U-Line, Model JCE-30K, 60 lbs. capacity; 1- PELOUZE, Model 4010, 125 lbs. capacity; FAIRBANKS Portable, Balance Beam Platform Scales 500 lbs. capacity Platform.
174
Consisting of but not necessarily limited to: 1-30 in. x 60 in. Double Pedestal Desk, Steel; 1- Folding Leg Table, 30 in. x 60 in., Fair Condition; 1- Work Shelf, Wood, 8 ft. long x 29 in. deep.
175
Consisting of but not necessarily limited to: SIGNODE Steel Strapping, 3- Rolls of Shrink Wrap, Filament Tape and Related; 2- Rolls of Foam Wrapping/Cushioning.
177
4- Bays/Sections, Each Section is 10 ft. high x 42 in deep x 8 ft. long, having 3- Shelves in Each Section, Shelving Flooring on 2- Sections is Plywood, on 2- Sections it is Wire Mesh; With 2- Hose Reels (With Air Hoses).
179
4- Bays/Sections, Each Section is 12 ft. high x 42 in. deep x 10 ft. long having 3- 2 in. x 6 in. Flooring Boards; 4- Bays/Sections are 10 ft. high x 42 in. deep x 8 ft. long, having 3- Plywood Flooring Pieces.
180
4- Bays/Sections, 2- Bays are 12 ft. high x 42 in. deep x 9 ft. long, 3- Shelves are Plywood; 2- Bays are 10 ft. high x 42 in. Deep x 8 ft. long, 3- Shelves are Plywood.
182
All are Portable on Castering Wheels, 42 in. to 48 in. high x 4 ft. to 6 ft. long, 4- Carts have Plastic Display/Storage Bins, Some have Related Consumable Parts.
183
Consisting of but not necessarily limited to: Bins containing Fasteners, Roller Chain, Wire, Hand Tools, Leather Gloves, Tape and related.
184
1- is 5- Bay/Section, Solid Side, Open Back, 7 ft. high x 3 ft. wide Each Bay, 4- Shelves; 1- is 6- Bay/Section, Open Side and back, 4- Shelves, 8 ft. high x 3 ft. wide, 4- Shelves.
185
14- Drawer, Ball Bearing, Grip Latch, each Drawer has Contents consisting of but not necessasrily limited to: 4- (approx.) Sets of Deep Sockets for 1/4 in. and 3/8 in. Drive; 1-3/8 in to 7/16 in. Combination Wrenches; Air Impact Wrenches and Grinders with…
186
Consisting of but not necessarily limited to: CRAFTSMAN 8- Drawer chest having Hinged Top Tray, with Contents of Hand Tools, 1- Work Bench, Steel with Wood Top, 33 in. high x 2 ft. deep x 4 ft. long, having Mid and Bottom Shelf with Contents of Hand Tools…
187
Consisting of but not necessarily limited to: CRAFTSMAN 6- Drawer 'Quiet Glide' Tool Chest having Hinged Top with Contents of Tools; Work Cart is 32 in. high x 24 in. deep x 38 in long, Steel on Castering Wheels.
188
Consisting of but not necessarily limited to: CRAFTSMAN 6- Drawer 'Quiet Glide' Tool Chest having Hinged Top with Contents of Tools; Work Cart is 32 in. high x 24 in. deep x 38 in long, Steel on Castering Wheels.
190
Having Cylinder Unit, 5- Application Fittings, with Plastic Storage/Carrying Case.
191
With Ram Extension, Expander Jaw, with Plastic Storage/Carrying Case.
192
With Body Repair Kit, with Plastic Storage/Carrying Case (NOTE: Unit appears to be Complete with all of its originally assigned Components).
193
Steel, 43-1/2 in. high x 24 in. wide x 48 in. long, having Expanded Metal shelf Flooring and Sides, 1- Side is Hinged for Fold-Down Access, on 4- Wheels.
194
Consisting of but not necessarily limited to: Work Bench, heavy Duty, Wood, 38 in. high x 30 in. deep x 8 ft. long (approx.), having Peg Board Back Board, Mid-Shelf; WILTON 6 in. Vise, 1- Set of GRIP 2 in. to 1 ft. 16 in. Open-End Crow Feet Wrenches Relat…
196
Consisting of but not necessarily limited to: 1- AC DELCO 3-1/2 Ton Heavy Duty Garage Jack, Hydraulic, Portable; 1- TORIN 2- Ton Hydraulic Trolley Jack, Portable.
197
Consisting of but not necessarily limited to: 3- Open-End Wrenches, 2 in. to 1-1/2 in.; Hammers; Mallets; BEHRENS Oil Can; Funnels; 5- Grease Guns, Deep Socket Set; 3- Drill and Tap Sets; Flash Lights, NAPA 2-1/2 in. dia. Muffler Clamps and Related; With …
198
Consisting of but not necessarily limited to: 4- of which are NAPA Model 520-2000 6 ton Jack Stands.
201
Consisting of but not necessarily limited to: 1- EVERCRAFT, 1- LARIN, 1- AC DELCO.
204
Having STEWART-WARNER Air Operated Pump, Part No. 8551-4 Grease Pump, s/n V-5 with Hose.
205
Consisting of but not necessarily limited to: 4- Hydraulic Hoses, 3/4 in. dia. x 3 ft. length (est.); Safety Glasses and Face Shield; Flexible PVC Tubing; 2- Equipment Attachment Pins; MAGIC Aluminum Cutting Fluid; Bag of Shop Tools; Material Handling Car…
206
Consisting of but not necessarily limited to: 1- Work Table, Steel with Wood Top Surface, 32-1/2 in. high x 3 ft. wide x 10 ft. long; 2 Material Handling Carts, Steel, 41 in. high x 24 in. wide x 48 in. long, having 3- Shelves, Plywood Bottom, on 4- Caste…
207
15- total Bays/Sections consisting of but not necessarily limited to: 8- Bays/Sections are 7 ft. tall x 2 ft. deep x 3 ft. wide, Open Sides and Back, Each having 4- Steel Shelves; 7 Bays/Sections are 8 ft. tall x 2 ft. deep x 3 ft. wide.
208
Having 16 ft. GORNEL 16 ft. Span, 1000 lbs. capacity having Air Powered travel Under-Slung Bridge; Pendent Controls; 4- Bay/Sections 16 ft. high x 16 ft. 3 in.(approx.) each Bay, total length 50 ft. (approx.) Runways, Each Section with Column and Header W…
209
2,000 lbs. capacity, 10 ft. 4 in. OAH, 11 in. approx. Inside Span, on 4- Castering Wheels, each with Wheel Lock; with COFFING Model JLC Geared Chain Hoist, 1,500 lbs. capacity, having Pendent Controls; COFFING 2- ton Traversing Hoist Trolley.
210
1- Barrel has a Hand Operated Gear Type Pump with Cartridge Type Filter and 5 ft. (est.) Hose (NOTE: 1- Barrel appears to be Empty, 1- Barrel apparently has been drawn from).
211
Consisting of but not necessarily limited to: Heavy Duty Wood Work Bench, 37-1/2 in. high x 28-1/2 in. Deep x 8 ft. long with Mid-Positioned Shelf and Peg Board Back Stop; 11- (approx.) Plastic Parts Tubs and Bins.
212
Consisting of but not necessarily limited to: LIFT ALL Load Hugger, US CARGO CONTROL and Others; 1- JUN KAUNG Cable Type Come-a-Long; 20-ton Hydraulic Jack; With TOOL BOX, PLASTIC With Contents; With 5 (approx.)- PRY BARS: With 1 in. Drive Socket Extensio…
213
Consisting of but not necessarily limited to: 1- WERNER, Model FS104 MK10, 4 ft. Step Ladder, Fiberglass with Aluminum Steps, 250 lbs. Load Capacity; 1- WERNER, Model 150-4, 26 in. Step Ladder, 200 lbs. Load Capacity, all Aluminum; 1- 24 in. Step Ladder h…
217
Consisting of but not necessarily limited to: 1- SHOP-VAC, Model 92L625C, Wet/Dry Utility Vacuum, Portable, powered by 6.25 peak hp Electric Motor, 16 gal. capacity; 1- JUSTRITE, Model 09100, 8 gal. capacity Oily Waste Can.
220
and 1- Box of 6 in. (est.) Abrasive Disks.
221
With 1- Box (partial) of 3-1/4 in. x .120, Bright, Smooth Shank, 314X120C, Wire Weld Coil Nails.
224
Consisting of but not necessarily limited to: 1- Model N9514B 4 in. 90 Hand Grinder; 1- Model N/A 1/4 in. Hand Drill.
229
With Charger and M18 Red Lithium XC Spare Battery, All mounted in a Molded Plastic Carrying Case.
231
Consisting of Drive Impact Wrench, with Battery Charger and M18 Red Lithium Spare Battery, Molded Plastic Carrying/Storage Case.
237
NOTE: Apparently in Excellent/Unused Condition. In OEM Packaging/Shipping Cardboard /Boxes.
238
NOTE: Apparently in Excellent/Unused Condition. In OEM Packaging/Shipping Cardboard /Boxes.
247
With 1- Model DCB101 12 v-20 v, and 1- DCB115 Battery Chargers with Extra Battery on Each Charger, All in Molded Plastic Carry/Storage Case.
249
18 v, with Model DW9116, 7.2v-18 v Battery Charger, in Molded Plastic Carrying/Storage Case.
251
Having Mid- Shelf, 36 -1/2 in. high x 36 in. deep x 8ft. long, having Plywood Top, COLUMBIAN Model D45-M4 Vise.
252
Having Bottom Shelf 40 in. high x 38 in. deep x 48 in. long, mounted on Castering Wheels. (NOTE: 1- Table contains 19- Spools of 16 gauge, Color Coded Electrical Instrumentation Communication and Lighting Wiring.
253
35-1.2 in. high x 30-1/2 in. deep x 10 ft. long, All Steel with 4 in. high Back Splash.
254
Each with Plastic Parts Bins, consisting of but not necessarily limited to: 4- Rack Stands, each 60 in. high x 16 in. deep, x (2- are 59-1/2 in. wide, 1- is 48 in. wide and 1- is 37-1/2 in. wide), having 5- Sloping, Expanded Metal Shelves: 2- have 28- (ap…
255
3- are 5 ft. high with Plastic Storage Bins; 1-is 3- Bay/Section Storage Shelving, 8 ft. high x 9 ft. long OA with Plastic Storage Bins; 1- is Material Handling Wire Basket containing Plastic Parts Storage Bins.
256
6- Bays/Sections, Each Section is 12 ft. high x 42 in. deep x 10 ft wide having 3- Shelves, Each Floored with 2 in. x 6 in - 2 in. x 8 in. Wood.
258
8- (est.); LIFT PRO 3-Leg TOG Chain Fall with Clevis, 7000 lb. Vertical capacity; 2- 3- Leg Swivel Hooks, Chains Cargo Straps; With CHAIN AND LOAD BOOMERS: Consisting of but not necessarily limited to: 12-(approx.) Chain Load Boomers both Over Center and …
261
5- Bays/sections, each Section is 10 ft. high x 42 in. deep x 9 ft. long, (1- Section is 12 ft. high ), Each Section having 3- Shelves; are Plywood and 2 in. x 6 in. Flooring.
263
Consisting of but not necessarily limited to: 9- Push Brooms; 1- Snow Shovel; 1- Garden Rake; 3- Dust Pans; 1- Ice Chipper / Scraper.
264
Consisting of: 1- 8 ft. high x 12 ft. wide x 20 ft. long Panel Section Galvanized Steel Booth, having 1- Power Up-Down Rolled Fabric End Door, having Up-Draft Ventilation System with Filter Cartridges, DEIMCO INC. Control Panel having DWYER Pressure Gauge…
265
Mounted on Model Optiflex F, 4- Wheel Cart with 5 gal. (approx.) Canister.
269
Consisting of HOTSY Steam Unit, FRIPLEX Pressure Pump powered by Electric Motor, Controls, Exhaust Piping and Related Support Items with Hose and Wash Wand.
270
500 F, 850,000 BTU/hr.; 2- HONEYWELL Fluid Power Gas Valves and Related Safety Modules, 10 ft. high x 10 ft. wide x 18 ft. long (approx. OAD), Double Hinged Doors on both Ends.
271
Metal Interior and Exterior Skin, 9 ft. 8 in. high x 18 ft. wide x 25 ft. long (approx. OAD) having 2- 9 ft. high x 10 ft. wide End Openings, 1- of these with 2- Sliding, Top Rail Track Enclosure Doors; 1- High Pressure, 1-Steam Wash Wand, 50 ft. x 1 in. …
272
Consisting of 1- Cart, Steel, 7 ft. 2 in. high x 5 ft. wide x 12 ft. 5 in. long mounted on 4- Wheels; 3- Carts Steel, 7 ft. 2 in. high x 5 ft. wide x 8 ft. 6 in. long mounted on 4- Wheels.
273
For suspending Work-in-Progress, Assorted Sizes from 30 in. long to 6 in. long in 4 Intermediate Length with Custom Designed and Fabricated Cart on Wheels.
274
Consisting of but not necessarily limited to: 12- Boxes SHERMAN WILLIAMS, 50 lbs. per Box, of RHS8-20004, Beige; DYS8-20008, Yellow; RBS 8-00002, Jet Black; EAS6-C00000, Gray Primer; DYSB-20008-C50, Caterpillar Yellow; DIAMOND VOGEL Peridium EH -3352 Yell…
275
Consisting of but not necessarily limited to: 2- MOLDEX 8000 Series Respirator Face Pieces; 1- Box MOLDEX 8020 Filter Retainer; 2- Boxes MOLDEX Replaceable Cartridges; 1- Box 3M 7253 Gas Cartridge; 1- Box 3M 7200S Dual Cartridge; 2- Boxes AMERICAN ALL SAF…
276
Consisting of but not necessarily limited to: Double Pedestal Desk, 30 in. x 60 in., Metal; HON, 4- Drawer, Letter, Vertical File Cabinet; Storage Cabinet, 84 in. high (approx.) Double Hinged Front Doors; STEELMASTER 2- Drawer Card File Cabinet.
280
P255/50R20 104H Tires mounted on European Agricultural Wheels; (Appear to be New/Unused).
284
3- Bays/Sections, 10 ft. high x 34 in. deep x 8 ft. long having 3- Shelves with Plywood Flooring.
285
Consisting of but not necessarily limited to: 1- CM Model WL, 1- Ton Electric Motor Geared Chain Hoist s/n LW-169-P; 1- JET Model L-90, 1/2 Ton Manual Chain Hoist; 1- Coil of Electrical Power Cord, Miscellaneous Parts; 1- Steel Storage Rack.
290
1- 8 ft. Folding Leg Table, 2- Side Arm Chairs; 2- Section Wood Grain Formica Top.
291
4- Panel/Section Modular Room Divider; 5- Sections of Modular Wall Panels, 4- Cantilevered Steel Shelves; With EAST END, ACCOUNTING / IT - LOCATION: 6- Sections, 74 in. high x 48 in. wide (approx.), 2- Sections having 20 in. high (approx.) Clear Glass Pan…
292
1- Double Pedestal Desk; 1- HON 2- Drawer Lateral File Cabinet; 1- TENNESCO 2- Drawer Lateral File Cabinet; 1- Floor Fan, Pedestal Type; Chair Floor Mat.
293
With DELL Monitor, Logitech Keyboard and Mouse; With HEWLETT PACKARD PRINTER LaserJet 1020.
294
2- Folding Leg Tables, each 6 ft. long; WHIRLPOOL Microwave Oven; BLACK & DECKER Versa Brew Plus Coffee Maker.
295
2- 8 ft. Long and 2- 5 ft. 6 in. long Tables having Wood Grain Plastic Laminate Tops; 20- (approx.) Stacking Chairs; 1- 2- Shelf Book Case; 1- Wood 2- Drawer Cabinet; (NOTE: Tables are arranged as a Conference Table).
297
Consisting of but not necessarily limited to: L-Shaped Double Pedestal Desk; 6 ft. tall Bookcase/Hutch; Printer Stand; 2- HON 4- Drawer Letter, Locking, Vertical File Cabinets; Side Table; Swivel Executive Chair; 2- Side Arm Chairs; Desk Chair Floor Mat; …
298
30 in. x 60 in. Double Pedestal Desk, Steel; 3- Shelf, Wood Bookcase; HON 4- Drawer, Letter, Locking, Vertical File Cabinet; /Dry Marker/Cork Board, Executive Swivel Chair; Desk Chair Floor Mat.
300
Consisting of but not necessarily limited to: Computer Work Station having 90 Corner Segment and Left and Right Hand Units; 2- 3- Drawer File Pedestals; 1- 4- Drawer Vertical File Cabinet; Executive Swivel Chair; Desk Chair Floor Mat; Double Pedestal Desk…
301
3- are MAYLINE C-File Drawing File Cabinets, 2- are 10- Drawer and 1- is 7- Drawer; 2- SAFECO Drawing File Cabinets, Each having 5- Drawers; 1- SAFE CABINET LABORATORIES, Fire Proof, 4- Drawer, Locking, Vertical, File Cabinet.; 1- Credenza, Steel.
302
30 in. x 60 in. Double Pedestal Desk, Swivel Chair, Supply Closet Contents having Miscellaneous Office Consumables.
303
Double Pedestal Desk having L-Return; Executive Swivel Chair; Desk Chair Mat; HON 3- Drawer, Locking, Vertical, File Cabinet; 3- Shelf Printer Cabinet; 8 ft. long Conference Table, Boat Shaped; 6- Chairs, Swivel; HOOVER 12- amp Wide Path, Vertical Vacuum …
307
Windows 7 OS; DELL Monitor, 1- DELL and HEWLETT PACKARD Keyboards, 2- DELL Mice.
313
Consisting of but not necessarily limited to: 2- Boxes/Tubs containing 3- Keyboards, Mice, Power Strips, Keyboard Shelf; Foot Rest and Others.
314
Double Pedestal Desk with L-Return, Steel; BROYHILL Executive Chair, Swivel; Desk Chair Mat; Straight Side Arm Chair; Dry Marker Board; Double Pedestal Desk; Work Table, 58 in. wide, having Cantilevered Top Work Surface; HON 2- Drawer, Letter, Vertical Fi…
