Lot
55
Manufacturer
JOHN ZINK COMPANY
Name
WASTE GAS ENCLOSED VAPOR COMBUSTOR / FLARE UNIT
Model
ZCS-3-6-35-X-2/10-X, OEM Tag No. E-1810
Serial
Description
6 ft. OD x 35 ft. OAH Stack dimensions, having a 42 in. high x 36 in. wide (approx.) Louvered, Base installed Air Intake Port, 20 in. dia. (est.) Forced Air Burner Axial Fan, Electrical Power and Instrumentation Control Panel with Starter Switches and Circuit Status Indicator Lights; 4- Electrical Power and Control Modules (NOTE: The function of each is unidentified), 1- Tank, Vertical 4 ft. dia. x 8 ft. seam to seam, Domed Top and Bottom, Skirted; 1- Pallet containing 1- Wood Crate and 1- Item of Internal Fittings. This is a vapor combustion system designed to burn hydrocarbon vapors. The system consists of a 6? diameter by 35? OAH stack, burners, pilots, control system, and liquid seal. All combustion takes place inside the vessel to hide the flames. All instrumentation, piping and combustion equipment required for burning, and monitoring the system are included. The unit will automatically make adjustments for the operating conditions it may eventually encounter (e.g. high BTU, low BTU and all conditions in between). If the hydrocarbon concentration drops off and the system cannot maintain the operating temperature (typically 500 F - 1,400 F) with the waste vapors alone, the unit can be set up to inject auxiliary fuel into the waste stream to maintain the operating temperature. (Original Cost $300,000.) Leased Item, Selling Subject to Reserve.
Return to Catalog