Bowl Inside Diameter 737/406 mm, Powered by 1- BALDOR Inverter 200 hp Induction Electric Motor, 1- BALDOR Inverter 50 hp Induction Electric Motor, 1- Independent Hydraulic Power Unit; with 1- Motor Control Center Cabinet containing ASEA BROWN BOVERI 3-Fre…
Bowl inside diameter 737/406 mm, Powered by 1- BALDOR Inverter 200 hp Induction Electric Motor, 1- BALDOR Inverter 50 hp Induction Electric Motor, 1- Independent Hydraulic Power Unit; With 1- Motor Control Center Cabinet containing ASEA BROWN BOVERI 3-Fre…
Bowl Inside Diameter 737/406 mm, Powered by 1- BALDOR Inverter 200 hp Induction Electric Motor, 1- BALDOR Inverter 50 hp Induction Electric Motor, 1- Independent Hydraulic Power Unit; with 1- Motor Control Center Cabinet containing ASEA BROWN BOVERI 3-Fre…
Bowl Inside Diameter 737/406 mm, Powered by 1- BALDOR Inverter 200 hp Induction Electric Motor, 1- BALDOR Inverter 50 hp Induction Electric Motor, 1- Independent Hydraulic Power Unit; with 1- Motor Control Center Cabinet containing ASEA BROWN BOVERI 3-Fre…
Size 3 x 3-13, Powered by RELIANT 15 hp electric Induction Motor, 460 volt, 60, having JOHN CRANE Seal Support System having Head Tank; Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 10 x 12-16, 6845 gpm, Metal Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 400hp, 4160 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System having Head Tank, Unitized and Skidded.
Size 8 x 10-16H, Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 300hp, 460 volt, 6 Hz.3 ph, having JOHN CRANE Seal Support System having Head Tank.
Material of Construction Ductile Iron, Powered by RELIANCE Electric Induction Motor, 125 hp, 460 volt, 60 Hz. 3 ph, having JOHN CRANE Seal Support System having Head Tank.
Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor, 300 hp, 460 volt, 60 Hz. 3 ph, 1880 gpm, having JOHN CRANE Seal Support System having Head Tank.
1.5 x 3-13, 450 gpm, Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor 100 hp, 460 volt, 60 Hz, 3 ph, having JOHN CRANE Seal Support System having Head Tank.
6 x 8-13, Material of Construction 316SS, Powered by RELIANCE Electric Induction Motor 30 hp, 460 volt, 60 Hz, 3 ph; and 6 x 8-13, 1440 gpm, Material of Construction 316SS, Powered by RELIANCE Electric Induction Motor 30 hp, 460 volts, 60 Hz, 3 ph.
4 in x 6 in x 10G, Material of Construction 316SS, 480 gpm, Powered by RELIANCE Electric Induction Motor, 15 hp, 460 volts, 60 Hz, 3 ph., having JOHN CRANE Seal Support System having Head Tank; and 4 in x 6 in x 10G, 480 gpm, Powered by RELIANCE Electric …
1.5 x 3 x 6, 160 gpm, Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor 15 hp; With JOHN CRANE Seal Support System having Head Tank.
2 x 3 x 6, Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor 10 hp; and 3 x 4 x 8.6, 1440 gpm, Material of Construction 316SS, Powered by RELIANCE Electric Induction Motor 250 gpm, 5 hp., having JOHN CRANE Seal Support System h…
3 x 4 x 8.6, 268 gpm, Material of Construction 316SS, Powered by RELIANCE Electric Induction Motor 7.5 hp; and 3 x 4 x 8.6, 268 gpm, Material of Construction 316SS, Powered by RELIANCE Electric Induction Motor 7.5 hp.
4 x 6 x 13, 854 gpm, Material of Construction CD4MC4, Powered by Electric Induction Motor 40 hp, having JOHN CRANE Seal Support System having Head Tank.
8 x 10 x 22, 3632 gpm, Material of Construction CD4HCU, Powered by RELIANCE Electric Induction Motor 250 hp, 1200 rpm 4160 volts 60 Hz, 3 cyl, having JOHN CRANE Seal Support System having Head Tank.
Steel Fabrication, 64 in dia x 12 ft tall (approx) Domed Both Ends, Skirted Bottom. 5- Pallets Containing 1- Air By-Pass Silencer, 1- Air Intake Silencer; 1- Condensate Separator Tank, 8- 10 gal Pails of Ingersoll Rand Techtrol Gold III Oil.
Consisting of but not limited to: 3- Joints Stainless Steel, 8 in OD x 30 ft (mol); 1- Joint, Stainless Steel, 12 in OD x 7 ft (mol) with 1- Flange; 1- Joint 304 H Stainless Steel 24 in OD; 1- Joint 304 H Stainless Steel 16 in OD x 30 ft (mol); 1- Joint 3…
Consisting of but not limited to: Remaining Process Piping that is Bolted to Individual Items of Equipment at the first flanged and bolted fitting and/or is attached to/or supported by Structural Steel Frame Work of subject, building, or attachments.
36- Total (mol) Valves in the Main Production Building consisting of but not necessarily limited to: 2- 16 in having FALCON Air Actuated Closing System; 4- 18 in M. F-360 CF8M having FALCON Air Actuated Closing System; 9- 10 in F-360 CF8M having FALCON Ai…
Patent No. CLS312PT300KD12, Unitized on Skid; with ATLAS INDUSTRIAL MFG CO. Shell and Tube Heat Exchanger 16 in OD x 12 ft long (mol) Bd. No. 10222, s/n 11918. (2007)
Consisting of but not necessarily limited to: 1- Piece 7 1/2 in high x 39 in wide x 30 ft long (mol); 2- pieces 7 1/2 in high x 24 in wide x 12 ft long (mol); 7- Pieces 7 1/2 in high x 39 in to 12 in x various lengths; 1- Piece 7 1/2 in x 20 in x 15 ft lo…
5/8 in x 12 ft; ToughRock Fire Guard Type X.; GEORGIA PACIFIC 5/8 in x 10 in Fireguard Sheet Rock; USG 5/8 in x 4 ft x 12 ft FIRE CODE ® CORE Type X Sheet Rock. (4- Stacks located in 3- different Rooms)
Unfaced Batts, Each Bundle 16- Pieces, 16- In Wide, 3 5/8 In X 96 In Long, Consisting Of But Not Limited To: 4- Bales And 14- Bundles. (2- Groups Located in 2- Different Rooms)
27 ft dia (mol), 9- Support Towers 10 ft. high (approx), Single 'H'-Beam Pedestal having Top Mounted Piping Support Member, And 7- Sections of Aluminum Electric Power Cable Trays, 4- Support Towers 10 ft high (approx), Single 'H'-Beam Pedestal having 3- C…
2 X 3-10, 208 gpm, 141 ft Head, Material of Construction CD4MCU, powered by RELIANCE 25 hp Electric Induction Motor 460 volts; with JOHN CRANE Seal Support System and 2 X 3-10, 208 gpm, 141 ft Head, Material of Construction CD4MCU, powered by RELIANCE 25 …
Consisting of but not necessarily limited to: 3- Layers of 2 x 8 1/2 Timber, Cross Laid, 8 ft x 18 ft; 50 (mol) Mats in the South Group, 42 (mol) in the East Group, and 45 (mol) in the North Group, 2- Mats -South Central, 2- Mats South East Corner of Peri…
14 in x 16 in -22 in, 5,161 gpm, Material of Construction CD4HCU, Powered by RELIANCE 125 hp Electric Induction Motor with JOHN CRANE Seal Support System.
14 in x 16 in -22 in, 5,161 gpm, Material of Construction CD4HCU, Powered by RELIANCE 125 hp Electric Induction Motor, with JOHN CRANE Seal Support System.
8 in x 10 in -17, 2,738 gpm, Material of Construction, CD4HCU, Powered by RELIANCE 75 hp Electric Induction Motor, with JOHN CRANE Seal Support System.
8 in x 10 in -17, 2,738 gpm, Material of Construction, CD4HCU, Powered by RELIANCE 75 hp Electric Induction Motor, with JOHN CRANE Seal Support System.
1- Model 3196, 4 x 6 x 10 H, Material of Construction - Stainless Steel, Powered by RELIANCE 7.5 hp Electric Induction Motor, 460 volts, 60 Hz, 3 ph; 1- Model 3196 1 x 1.5 x 6, Material of Construction - 316 Stainless Steel, Powered by RELIANCE 5 hp Elec…
1-Model 3196 3 x 4-8G Material of Construction - Ductile Iron. Powered by RELIANCE 5 hp Electric Induction Motor, 460 volts, with FLOW SERVE™ Model NX-0500 Seal Support System; 1- Model 3196 3 x 4 x 10 Material of Construction - 316 Stainless Steel, Pow…
1- Model 3196, 3 x 4 x 13, Material of Design - 316 Stainless Steel, Powered by RELIANCE 40 hp Electric Induction Motor 460 volt, 60 Hz, 3 ph; 1- Model 3196, 1 x 1.5 x 6, Material of Design - Ductile Iron, Powered by RELIANCE 1 hp Electric Induction Motor…
Having 1- Tank and 1- GOULDS 3196 3 x 4-10 Centrifugal Pump Material of Design 316 Stainless Steel, s/n 734F881.1W3 Powered by United States Electric Motors 7.5 hp Electric Induction Motor, 460 volt, 60 Hz, 3 ph, Unitized and Skidded.
Consisting of but not necessarily limited to: 1- Joint 14 in OD x 36 ft (mol) Piping, Stainless Steel; 2- 90° Sweet Ells; 2- 14 in dia Butterfly Valves, Stainless Steel, Each having MORIN ® Rotary Actuator with manual Stop, Air Pilot Operated, Air Actua…
Located in the Building and Both North and South Equipment Porches and on or under the Mezzanine. (NOTE: Installation and Construction of this Complex is Apparently Incomplete.)
Re: s/n 729F808.1W3, Material of Construction - Ductile Iron, 4 x 6-10H, Powered by RELIANCE Electric Induction Motor 7.5 hp, 460 volt, 60 Hz, 3 ph, with JOHN CRANE Seal Support System; Re: s/n 729F785.1H3, Stainless Steel, 1 x 1.50 -6, Powered by RELIANC…
Re: s/n 729F796.1W3, Material of Construction - Ductile Iron, Powered by RELIANCE Electric Induction Motor 5 hp, 460 volt, 60 Hz, 3 ph with FLOW SERVE Model NX-0500 Seal Support System; Re: s/n 729F786.1W3, Material of Construction - 316 Stainless Steel, …
s/n 729F789.1W3, Material of Construction - 316 Stainless Steel, 3 x 4-13, Powered by RELIANCE Electric Induction Motor, 40 hp, 460 volt, 60 Hz, 3 ph with FLOW SERVE™, Model NX-0500 ; s/n 729F809.1W3 Material of Construction - Ductile Steel, Powered by …
Having 1- Tank and 1- GOULDS 3196 3 x 4-10 Centrifugal Pump Material of Design 316 Stainless Steel, s/n 734F881.2W3 Powered by United States Electric Motors 7.5 hp Electric Induction Motor, 460 volt, 60 Hz, 3 ph, Unitized and Skidded.
Material of Construction-316 Stainless Steel 8 in OD x 32 in long (mol), F-4402 and F-4401, 3 in Flanged Outlet, 1- SPENCER 6 in 150 Series Strainer s/n 70513 Flanged; 1- NA 21 KTM H127, 6 in Stainless Steel Ball, CFAM Male Valve With Air Activated Closin…
Consisting of but not necessarily limited to: 1- Joint 14 in OD x 36 ft (mol) Piping, Stainless Steel; 2- 90° Sweet Ells; 2- 14 in dia Butterfly Valves, Stainless Steel, Each having MORIN ® Rotary Actuator with manual Stop, Air Pilot Operated, Air Actua…
Located in the Building and Both North and South Equipment Porches and on or under the Mezzanine; and 1 - Pallet containing 3- Diffusers, Stainless Steel 16 in OD (mol); 1- SHARPE Gate Valve, WCB, Rising Stem, Flanged, 12 in 150 Series, WCB; 1- Butterfly …
21,800 gpm capacity, Consisting of but not necessarily limited to: 10- Cells, 19 ft 9 in high x 141 ft 7 in long, Each Cell having 1- Up-Draft Fan with 6- Blade, 12 ft dia powered by to hp Electric Induction Motor; With 2- NEMA Stainless Steel Motor Contr…
21,800 gpm capacity, Consisting of but not necessarily limited to: 10- Cells, 19 ft 9 in high x 141 ft 7 in long, Each Cell having 1- Up-Draft Fan with 6- Blade, 12 ft dia powered by to hp Electric Induction Motor; With 2- NEMA Stainless Steel Motor Contr…
Consisting of but not limited to: 1- Pump Manifold Section, 46 in OD (mol) x 100 ft long (mol); 4- 30 in dia Section, Each 145 ft long (mol); 1- Section 42 in (mol) x 7/16 in (mol) x 22 ft (mol) having Tee with Domed Cap; 1- 42 in (mol) Tee; 2- Sections 6…
1- ROBINSON INDUSTRIES Type BI 1120 Industrial Blower, s/n 206312, Size 100 x 11-1\ 4, Powered by TECO WESTINGHOUSE, 3 ph Induction Electric Motor; 1- GEA BARR ROSIN INC Mixer, P O No. 2395 DW NO FBC-044-FBST-31-11 with CAMFIL Part No 94131-410, Stainless…
1- ROBINSON INDUSTRIES Type BI 1120 Industrial Blower, Size 100 x 11-1\ 4, Powered by TECO WESTINGHOUSE, 3 ph Induction Electric Motor; 1- GEA BARR ROSIN INC Mixer, P O No. 2395 DW NO FBC-044-FBST-31-11 with CAMFIL Part No 94131-410, Stainless Steel Heat …
Capacity @ 208 deg F, 99.98 lbs./hr. V.O.C. and 47.3 lbs./hr. CO2 Load. Consisting of but not necessarily limited to: overall unit dimensions - 20’ w x 75’ l (Mol), 5- Canister Media Bed Modules having 80” dia. full length Stainless Steel Manifold; …
Capacity @ 208 deg F, 99.98 lbs./hr. V.O.C. and 47.3 lbs./hr. CO2 Load. Consisting of but not necessarily limited to: overall unit dimensions - 20’ w x 75’ l (Mol), 5- Canister Media Bed Modules having 80” dia. full length Stainless Steel Manifold; …
Powered by RELIANCE 250 hp Electric Induction Motor 460 volts 60 Hz 3 ph, having BLISS Model 8 RF·SCMA·A·30 Rotary Feeder s/n 2717 with Magnet Separator.
Powered by RELIANCE 250 hp Electric Induction Motor 460 volts 60 Hz 3 ph, having BLISS Model 8 RF·SCMA·A·30 Rotary Feeder s/n 2717 with Magnet Separator. NOTE: Serial Number not available.
Powered by RELIANCE 250 hp Electric Induction Motor 460 volts 60 Hz 3 ph, having BLISS Model 8 RF·SCMA·A·30 Rotary Feeder s/n 2717 with Magnet Separator.
Powered by RELIANCE 250 hp Electric Induction Motor 460 volts 60 Hz 3 ph, having BLISS Model 8 RF·SCMA·A·30 Rotary Feeder s/n 2717 with Magnet Separator. NOTE: Serial Number not available.
Consisting of but not necessarily limited to: 1- Screen, Rotary, 10 ft. long x 5 ft. high x 5 ft. wide (mol) having Tapered Bottom with Center Discharge powered by SEW-EURODRIVE Variable Speed Electric Motor, Mounted on 4- Legs; 1-'Y' - Type Diverter Valv…
80 in w x 92 in high x 130 ft long (est), Consisting of but not necessarily limited to: 1- INTER SYSTEM Drag Conveyor, 20 1/2 in x 17 in x 135 ft long (est) (approx OD); 1- Support Tower, 8ft x 8 ft x 35 ft high (approx).
11043 sq ft Heating Surface, 75,900 lbs hr, 150 psi Design Pressure; With JOHN ZINK CO, Forced Air Burner Assembly, Model RMBU34-G-2000, 92.4 MM BTU/hr, Natural Gas Fired, s/n 9059335, With GORDON-PIATT™ Mark 6 Auto Flame Controller, Skidded.
11043 sq ft Heating Surface, 75,900 lbs hr, 150 psi Design Pressure; With JOHN ZINK CO, Forced Air Burner Assembly, Model RMBU34-G-2000, 92.4 MM BTU/hr, Natural Gas Fired Burner, s/n 90593--, With GORDON-PIATT™ Mark 6 Auto Flame Controller, Skidded.
11043 sq ft Heating Surface, 75,900 lbs hr, 150 psi Design Pressure; With JOHN ZINK CO, Forced air Burner Assembly, Model RMBU34-G-2000, 92.4 MM BTU/hr, Natural Gas Fired Burner, s/n 90593--, With GORDON-PIATT™ Mark 6 Auto Flame Controller, Skidded.
11043 sq ft Heating Surface, 75,900 lbs hr, 150 psi Design Pressure; With JOHN ZINK CO, Forced Air Burner Assembly, Model RMBU34-G-2000, 92.4 MM BTU/hr, Natural Gas Fired, s/n 9059335, With GORDON-PIATT™ Mark 6 Auto Flame Controller, Skidded.
50.35 ft. dia. x 33.01 high ft. tall (mol), Bolted Carbon Steel, Epoxy coated on Interior and Exterior, 7- Ring High Geodesic Roof, provision for Exterior Insulation 476, 000 gal. nominal capacity.
12 ft x 20 long (mol), Metal, Insulated, Skidded; With ALLIS CHALMERS Model 393H Split Case Centrifugal Pump, 12 x 10 x 18 F, s/n 07-048373-01-01\ KD103P, required Piping and Valves, Powered by JOHN DEERE Diesel Engine having Diesel Day Tank, 1- Crate Muf…
1- is Cast Iron, 8 x8-12, Powered by RELIANCE 15 hp Electric Induction Motor, 460 volt, 60 HZ, 3 ph.; and 1- is 3 x 4 x 13316 Stainless Steel powered by RELIANCE Electric Motor.
H'-Beam, Galvanized Carbon Steel, 6 in x 6 in x 42 in (mol); 3- Bundles, 72- Pieces (est) of 3 in x 3 in x 20 ft (approx) Galvanized Angle, Cable Tray and Piping Hanger Brackets, 1- Bundle of Rolled Edge, Galvanized, Slotted Hanger Cross Bar; 1- Ladder As…
35 ft tall (mol), Bolted, Carbon Steel, Epoxy Coated on Interior and Exterior, 7- Ring high Geodesic Roof, Provisions for Exterior Insulation. With Control Panel having but not limited to Flame Arrestor, Electrically Activated Ball Valve.
Consisting of but not necessarily limited to: 11- (mol) Bundles of 3/4in OD; 12- (mol) Bundles of 1 in OD; 6- (mol) Bundles of 2 in OD PVC; 3- Boxes of Flexible Galvanized Plastic Coated, 62 3/4 in x 4 3/16 in X 62 3/4 in, 30- Joints (mol) 2 in and 3 in x…
Consisting of but not necessarily limited to: 1- Stack GEORGIA-PACIFIC 5/8 in x 12 ft long Fiberguard® Type X Sheet Rock; 1- Stack US GYPSUM AND GEORGIA-PACIFIC 5/8 in x 4 in x 12 ft Sheet Rock; 1- Stack 5/8 in x 4 in x 12 ft Fiber Board Insulation.
12 ft wide x 40 ft long, Lean-to Design, 2- Ends and Outside Wall-the Common Mated Wall is Temporarily Covered with OSB. Containing: Lots 266 A through 266 G.
12 ft wide x 40 ft long, Lean-to Design, 2- Ends and Outside Wall-the Common Mated Wall is Temporarily Covered with OSB. Containing: Lots 267 A through 267 E.
18 ft long x 12 ft wide x 8 ft high having 1- Personnel Door, Insulated and Interior Paneling, with 4- Lifting Eyes and Forklift Pockets, (NOTE: Is Without Floor.)
Consisting of but not necessarily limited to: 8- Section of Electrical Power Cable Trays, 36 in wide, 24 in wide ,and 12 in wide; 6- Joints Pipe: 1- is 6 1/2 in OD x 90 ft (mol) long; (NOTE: 2 Joints Butt Welded), 4- are 3 in OD Plastic Coated Exterior; 1…
Consisting of but not necessarily limited to: 7- Bays constructed from 10 in x 10 in 'H'-Beam Galvanized Carbon Steel, 30ft high x 20 ft wide x 180 ft long (approx) with Contents of 21- (mol) pipes from 32 in dia to 3 in dia (mol), Most are Carbon Steel, …
Consisting of but not necessarily limited to: 6 x 12 in dia x 30 ft long (approx) 'T' Type and 6- 10 in x 10 in, 'H'-Beam, 'T' Type Towers; 4- Joints (2- each are Butt Welded) 8 3/8 in OD, Stainless Steel, 1- 54 in dia 45 ° El, Stainless Steel; 2- 42 in …
Consisting of but not necessarily limited to: 9 Pieces 74 in dia to 54 in dia, Stainless Steel, Flanged, Some with Connector Fittings, (NOTE: 1- Piece is east along the Fence 100 ft. (mol)); and 2- Pallets, 1- containing 4- Steel Saddle Mounting Supports,…
Consisting of but not necessarily limited to: 18- Pieces (mol), 36 in dia and Smaller; 2- Pallets containing various Flanged and Welded Neck Fittings, 8 in dia (mol) and Smaller.
Consisting of but not necessarily limited to: 30 + Pieces of Piping, Stainless Steel, 24 in dia and smaller; 2- Pieces of this are 40 ft long (mol) having End Fittings, with Tees, Ells, Pup Joints and Other Related Parts, Various Sizes.
Consisting of but not necessarily limited to: 4- Pieces 82 in dia, 1- of which is a 99 in ID to 69 in ID 'Y' Transition; 75± Pieces Piping and Fittings, Stainless Steel, 20 in OD and Smaller, 30 ft long and Shorter. (NOTE: 1- of these 5- Pieces is South …
Consisting of but not necessarily limited to: 75± Pieces Carbon Steel Piping 36 in OD and Smaller to include Fabricated Pieces and Pipe Joints; Pallets of Fittings.
Consisting of but not necessarily limited to: 26 Pieces (mol) 36 in OD, Flanged Tees, and Ells having Angled Exhaust Ends, 6- Joints 4 in OD x 20 ft long (mol) Stainless Steel Pipe.
Consisting of but not necessarily limited to: 4-36 in wide x 25 ft long (mol) Sections, Aluminum; 2- 24 in wide x 25 ft long (mol); 10- Joints YOUNGSTOWN TUBE COMPANY 6 in Schedule 10 P.E. Galvanized Piping in 10 ft 0 in lengths.
Consisting of but not necessarily limited to: 1- Drag Conveyor Chain, 24 in. wide (approx) with HDPE / NYLON / UHMWP Flights; 1- Lot of Carbon Steel Reinforcing Bar, 1 in dia and smaller, some 30 ft long (approx), some formed into Shapes; 1- Lot/Pallet S…
Consisting of but not necessarily limited to: 5- Pieces 10 in x 10 in x 36 ft long (mol) and Shorter; 2- Pieces 6 1/2 in x 12 1/2 in x 20 ft long (mol) 'I'-Beam; 15- Pieces 6 in x 10 1/2 in x 20 ft long (mol) 'I'-Beam; 1- Piece 24 in dia x 31 ft long (mol…
Consisting of but not necessarily limited to: 30- Pieces (mol) 36 in OD and Smaller with Weld Neck and Flanged End Fittings; 1- Piece 24 in dia x 31 ft long (mol) Carbon Steel Pipe.
Consisting of but not necessarily limited to: 24- Pieces (mol), 11 in OD and Smaller x 30 ft long (mol) and Shorter; 4 Joints 6 1/2 in OD x 20 ft long (mol); 1- 16 in OD (mol) Flanged Nipple.
Consisting of but not necessarily limited to: 1- 10 ft 4 in x 20 ft 10 in x 30 ft high (mol) Skeleton Frame work; 50- (approx) 'I'-Beam Cross Members; 1- Stack, Bar Grating Deck Material; 2- Stacks (Pallets) Bar Grating Deck Material.
Consisting of but not necessarily limited to: 1- Mounting Framework Containing 3- GRUNDFOS Model CR 90-3-1-A-G-A-E-KUBE Pumps each powered by BALDOR 30 KW Electric Induction Motor, With 1- WHEELER TANK MFG. INC. 7ft dia x 20 ft long (mol) Horizontal Tank,…
Consisting of but not necessarily limited to: 100 ± Pieces, Various; From 10 x 10 x 40 ft long 'H'-Beam to 6 1/2 in x 21 in x 30 ft long (mol) 'I'-Beam to 8 in x 12 in x 40 ft long (mol) 'I'-Beam to 1- Piece 30 in high x 10 1/2 in wide x 20 ft long (mol)…
Consisting of but not limited to: 1- Joint 54 in ID 90° El, Stainless Steel; 1- Joint- 54 in IDX 12 ft long (mol) Section, Stainless Steel; 1- 23 in ID x 30 ft long (mol) Section, Stainless Steel, having 2- 90° Ells welded on.
30 in x 33 ft long (mol), Powered by TECO-WESTINGHOUSE , 22 kw Electric Induction Motor driving through a Dodge Reduction Gear Box, having 2- ROTOLOK Rotary Air Locks, 1- is Size 75RVSISA6B and one is Smaller.
Consisting of but not necessarily limited to: 1-24 in x 10 in 'I'-Beam and Smaller, Angle Iron Braces and Gussets, Bar Grating Decking, 1- 12 in x 10 in x 40 ft long (mol) 'H'-Beam.
Consisting of but not necessarily limited to: 1- Joint 42 in ID x 42 ft high (mol) Carbon Steel having a Flanged End Fitting; 1- Joint 23 1/4 in ID (mol); 1- Joint 11 5/18 in ID (mol); 1- Joint 17 in ID (mol); 3- Pieces 17 in ID (mol) each having 2- 90° …
Consisting of but not necessarily limited to: 4- Pieces FELKER USA 48 in NPS 1/4 in , A778-304 L Stainless Steel, 2- Sections are 10 ft long, 1- is 5 ft 9 1/2 in and 1- is 45° long Sweep Ell.
Consisting of but not necessarily limited to: 10- Pallets Containing 1- 42 in ID Bolted, Flanged, 5 - 12 in ID (mol), Flanged Transitioning 45° - 90° Ells, 23- 5/8 in ID (mol) Gaskets; 7 ft (mol) Sections of 12 in dia (mol) Pipe; 4- Joints of 3 in ID (m…
Consisting of but not necessarily limited to: 11- (mol) 7 in x 14 in x 30 ft long (mol) 'I'-Beams; 8- (mol) 6 1/2 in x 8 in x 30 ft long (mol) and shorter 'I'-Beams; Angle Iron Diagonal Braces with Gusseted Attached; Tubular Diagonal Bracing; Bar Grating.
Consisting of but not necessarily limited to: 9- Pieces 2 3/4 in x 10 in x 20 ft long (mol) Channel Steel; 35- Pieces 2 1/4 in x 8 in x 20 ft long (mol) Channel Steel, Galvanized; 1- Piece 10 in x 10 in x 27 ft long (mol) 'H'-Beam, Galvanized. (NOTE: 1- …
Consisting of but not necessarily limited to: 1- Bundle 14 - (mol) Joints of Thin Wall Conduit; 1- Crate of Metal Cladding Ridge Roll, Corner Caps; 1- Crate of Gutter Down Spout 45° Ells; 2- Piles of Gutter Down Spouting.
Consisting of but not necessarily limited to: 1- 16 in ID x 20 ft long (mol) having Flanged End Fitting; 1- 16 in ID x 33 ft long (mol) having Flanged End Fitting; 1- 16 in ID x 36 ft long (mol) Having 90° Ell with Flanged End Fitting; 20- ( mol) 16 in I…
Consisting of but not necessarily limited to: 12- Pieces (mol) of 16 in ID (mol) x 50 ft long (mol) and shorter; 14- Pieces (mol) of 4 in ID (mol) x 45 ft long (mol) and shorter; 10- Pieces (mol) of Fittings, 16 in ID (mol) and smaller.
Consisting of but not necessarily limited to: 4- 10 in to 11 in dia Butt, 36 ft tall, (mol) Treated, 1- having Metal Halide Cantilevered Flood Light Fixture, 1- having Device Attachment Arm, 2- having Ground Wire; 25- Joints (mol) CARLON ® 6 in and small…
Consisting of but not necessarily limited to: 8- Barrels, 55- gal of PHILLIPS Eclipse "F" Grade 30/4, MOBILE Aero HFA and Others Oil; 2- HASTINGS EQUITY BIN MFG CO. 10 ft dia x 2 ft high Galvanized Stock Watering Tank/Containment Pit.
Consisting of but not necessarily limited to: 8- Pieces of 1 7/8 in ID (mol) 40 ft long (mol) total length (ach pieces is 2- Joints connected with a 90° Ell.
Consisting of but not necessarily limited to: 1- 41 in (mol) to 35 in dia Transition; 10 - Pieces (mol) 10 in ID (mol) Fabricated Pieces, Most having Flanged End Fittings, 100- Pieces (est) Total.
Consisting of but not necessarily limited to: 1- 17 3/4 in ID (mol) x 21 ft long (mol); 1- 6 1/2 in ID (mol) 55 ft long (mol) Fabricated, 150- Pieces Total (est). (NOTE: 1- Joint is located North of the Service Road.)
Consisting of but not necessarily limited to: 14- Pieces 5 in x 7 in Square Tubing Galvanized Carbon Steel; 2- pieces 5 1/2 in x 16 in 'I'-Beam; 2- Pieces 5 in x 12 in 'I'-Beam.
I'-Beam Support Cross Arms, Galvanized Steel, 8 in x 6 in x 55 in long (mol). (NOTE: This Lot has 2- Sections: 1- is along the South Fence and 1- is along the West Edge of the Ethanol Storage Area.)
Consisting of but not necessarily limited to: 4- Sections 7 1/2 in high x 12 in wide x 25 ft long (mol); 12- Sections 7 1/2 in high x 15 in wide x 25 ft long (mol); 2- Sections 7 1/2 in x 36 in wide x 8 ft 6 in long and 10- Related Pieces.
17 1/4 in ID (mol) x 7/16 in Wall Thickness x 36 ft to 40 ft long (mol), 2- with a 90° (mol) Ell. (NOTE: This is in 2- Groups approximately 75 ft apart.)
Consisting of but not necessarily limited to: 150 + pieces (est) Pipe and Fittings, 12 in dia and smaller, 45 ft long and shorter, many Fabricated with Elbows , Flanges, Reducers And Flanged Spools.
Consisting of but not necessarily limited to: 150 pieces (est), 1- Joint 17 in ID (mol) x 15 ft long (mol) and smaller; 1- Joint 6 3/4 in OD (mol) x 69 ft long (mol); 4- Pallets of Flanged Fittings.
Consisting of but not necessarily limited to: 4- Joints 41 1/4 in ID (mol) x 1/2 in (mol) Wall Thickness x 42 ft long (mol); 1- Joint 29 1/4 in ID (mol) x 7/16 (mol) Wall Thickness x 20 ft long; 4- Pieces 22 in OD (mol) x 30 ft long each having a 90° Ell…
Consisting of but not necessarily limited to: 1- Tank Bottom Steel Plate 27 ft 8 in dia (mol) x 3/8 in thick; 20 (mol) Piles of Rebar Steel Shapes; 4- Bundles of Rebar Steel, 60 ft long (approx); 3- Stacks of 4 in x 4 in Mesh, 8 ft wide x 20 ft long.
Consisting of but not necessarily limited to: 9- Pieces (mol) 17 1/2 in ID (mol) ASTM A778, TP304/304L Schedule 10S Pipe, 6- are 36 ft long (mol); 8- Pieces (mol) 17 1/2 in Fabricated Units, some having Tees and Ells; Other Flanged Spools, Flanges.
Consisting of but not necessarily limited to: 1- Joint 12 in OD (mol) x 36 ft long (mol) having 1 PRC - 12 and 1- PRC - 10 Tees Fabricated at One End; 2- Pieces 12 in to 10 in OD (mol); 6 Pieces (mol) 7 in to 4 in; 2- Pallets of Fittings.
Consisting of but not necessarily limited to: 11- Joints 8 x .188 ERW Schedule 10 Galvanized Pipe 21 ft long (mol), 19 ft long, 14 ft long and Other; 10 - (mol) Bundles of 2 1/2 in OD to 3/4 in OD Galvanized Pipe; 5- (mol) Bundles of 4 in OD Schedule 40 a…
Consisting of but not necessarily limited to: 1- ENARDO Model 951-4-111 Top Mount Pressure Relief Valve 4 in, N 18.0 Pressure; 1- 24 in x 24 in (mol) Louvered Fixture, Galvanized Steel.
Consisting of but not necessarily limited to: 18- Joints (mol) 1 in Pipe, Weld Neck; 5- (mol) 2 in Pipe, Weld Neck; 3- Bundles 3/4 in Pipe, Weld Neck; 4- Joints (mol) 7 in OD (mol) Cast Iron, Belled Hubs; 1- Joint 8 1/2 in OD (mol) x 12 ft high (mol), Car…
Consisting of but not necessarily limited to: 10- Bundles of 2 1/2 in OD (mol) and 3 1/2 in OD (mol) in 20 ft lengths (mol) and 8 3/4 in OD (mol) in 40 ft lengths, approximately 1/2 of the Bundles are Plastic Coated Exterior; 12- Joints of 12 7/8 in OD (m…
Consisting of but not necessarily limited to: 5- Bundles, each Bundle containing 5- Joints of 4 1/2 in OD (MOL) x 42 ft (mol) long; 2- Joints 14 in dia x 42 long; 1- Joint 18 in dia x 42 long; 4- Bundles, each Bundle containing 5- joints of 6 7/8 in OD x …
Consisting of but not necessarily limited to: 5- 'H'- type Column x 36 ft high (mol) and shorter; 75- (mol) Pieces of 'H' and 'I'- Beam Angle Iron to Fabricate a Skeleton Structure/Building in 7- Stacks/Groups (mol).
Consisting of but not necessarily limited to: 1- Pallet of Channel 9 1/2 in x 15 in long (mol); 2- Pallets of Rain Gutter Down Spout Section; 16- Pallets (mol) of Side Wall and Roof Cladding; 13- Doors with Frames; 3- Bundles of Z-Type Purlins; 5- Bundles…
Consisting of but not necessarily limited to: NOTE: 7- Total Partial Reels of Electrical Power Cable. 1- Reel (Partial) SOUTHWIRE 750 NEMIL AL Type VEE-2 110 Mile, Insulated 500 volt; 1- Reel (Partial) ALCAN S750 KCMIL, 380mm2 Compact STABILOY ® AA-8030 …
Consisting of but not necessarily limited to: 2- Saw Horses, 1- Work Table, 1- Portable shed, 8- Section 1/2 Circle Steel Plate; 1- Bundle Angle Iron; 5- Piles of Scrap Carbon Steel; Tank Hold Down Dogs; Angle Iron and Channel Steel.
Consisting of but not necessarily limited to: 1- Stack 20- Sheets (mol) 5 ft wide x 20 ft long x 3/8 in (mol); 1- Stack Strap, 2 in wide x 12 ft long (mol); 1- Stack plate, Assorted, Full and Cut Shapes.
21- Pieces, 4 in x 6 in rolled Stainless Angle Iron; 2- Pieces 60 in wide x 30 ft long (mol) Plate; 8- Joints of 16 in ID and 13 3/4 in OD (mol) x 18 ft long (mol); 1- Bundle of RIGID PVC Electrical Conduit; 6- 4 1/2 in OD Long Sweep Ell Conduit.
Consisting of but not necessarily limited to: 1- Screener / Sieve, Stainless Steel with Carbon Steel Support Framework 7 ft wide x 25 ft long x 10 ft high (approx).
Consisting of but not necessarily limited to: 62- Pieces (mol) of 8 in x 10 in 'I'-Beam x 36 in long (mol) with Diagonal Bracing and Walk Way Hand Safety Railings.
Consisting of but not necessarily limited to: 2- Exhaust Stack Sections having 23 in dia, Exhaust Stack with Rectangular Transition; 1- 23 in ID Pup Joint; 2- 23 in ID Flanged Hubs; 1- 82 in ID (mol) Circular to Rectangular Transition.
1- 6 ft 10 in dia x 26 ft Stack, Stainless Steel with Flanged Ends, 1- Diffuser Section, Stainless Steel, having 6 ft. 10 in dia. to Rectangular Transition, 8 ft. x 8 ft. x 20 ft high (approx) OAD; 9- Pieces, Carbon Steel Support Stands, 3 ft. x 3 ft. x 6…
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 5 7/8 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 1- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Consisting of but not necessarily limited to: 2- Stainless Steel Agitator Shafts, 4 in dia x 40 ft long (mol) with Shaft Bottom Centering Bearing and Blade Attachment Stubs.
Having PARKER DENISON Model PUP2330R221 Hydraulic Pump powered by BALDOR 10 hp Electric Induction Motor with Hydraulic Fluid Reservoir , Valves, Filters, Unitized and Skidded.
Having PARKER DENISON Model PUP2330R221 Hydraulic Pump powered by BALDOR 10 hp Electric Induction Motor with Hydraulic Fluid Reservoir , Valves, Filters, Unitized and Skidded.
Components consisting of but not necessarily limited to: 4- Bundles of Posts and Top Railing Tubing, 4 in to 1 5/8 in OD (mol) x 20 ft long (mol) and shorter; 25- Rolls of 8 ft Wire Mesh Fencing; 1- Pallet Hardware.
Consisting of but not necessarily limited to: 1- Piping Section, 30 in dia x 47 in long (mol) Flanged; 1- Pup Joint, Stainless Steel, 3 1/2 in OD x 72 in long (mol); 2- Steam Venturies, Stainless Steel, 6 in ID x 50 in long (mol); 1- Pup Joint, Stainless …
Consisting of but not necessarily limited to: 1- Pallet consisting of Turn Buckles, 'U'- Bolts, Saddle Bracket, Galvanized Carbon Steel; 1- Tote Box containing Pipe Support 'U'-Post, Galvanized Carbon Steel; 40- (mol) Pipe Support Hold Down Brackets; 18 i…
Consisting of but not necessarily limited to: 1- Crate containing 2- Sets (2- Halves Each) Weld Neck Flanges, Both are 12 in ID and Full Complement of Bolts and Nuts; 1- Pallet contains 3- Weld Neck Flange Halves; 1- Pallet contains 1- 20 in x 14 in Conce…
Consisting of but not necessarily limited to: 1- Joints 3 1/6 in ID (mol) x 40 ft long, Stainless Steel; 2- Joints 3 1/16 in ID (mol) x 20 ft long (mol), Stainless Steel; 1- Joint 7 15/16 in ID (mol) x 50 ft long (mol) having a 90° Ell Fabricated Carbon …
Consisting of but not necessarily limited to: 1- Reel 274+ ft (mol),606 lbs, VFD.5.1 MC HL HXXW-2 600 volts, 3C 4AWG +3C 12 AWG, PO No. 236398/004815; 1- REEL 1,000 + (mol), MCHL 600 volt, 3 X 14 GRD, 600 volt, 3 C10 AWG+3C, VFD; 1- Reel 896 ft + (mol) MC…
Consisting of but not necessarily limited to: 17- Joints (mol) of 18 in dia (mol) x 20 ft long (mol); 4- Joints (mol) 10 3/4 in dia (mol) x 20 ft long (mol); 15- Joints 4 1/2 in OD (mol) x 20 ft long (mol).
Consisting of but not necessarily limited to: 9- Joints (mol) 14 in dia (mol) x 20 ft long (mol); 37- Joints 8 1/2 in dia (mol) x 20 in long (mol); 6- Joints (mol) 6 1/2 in dia (mol) x 20 ft long; 3- Joints (mol) 4 in dia (mol) x 20 ft long (mol); 2- Join…
Consisting of but not necessarily limited to: 24- Joints, 24 in OD (mol) x 20 ft long (mol) Stainless Steel Pipe; 8- Joints19 1/2 in ID (mol) x 2 ft long (mol) Stainless Steel Pipe.
Consisting of but not necessarily limited to: 1- 45 in x 84 in Pre-Separator, Stainless Steel, Partial Circumferential Piece; 1- 45 in x 84 in Reducing Transition.
135- Ton Nominal Gross, 45- Ton per Section, 4- Sections, 11 ft wide x 20 ft long (mol) Each Section. With Scale Control. 111HD CC 97-093, nMax 10K, eMin 20 lbs. (NOTE: It is believed that LOT 844 contains the Load Cells and Electronic Controls, Read-Outs…
135- Ton Nominal Gross, 45- Ton per Section, 4- Sections, 11 ft wide x 20 ft long (mol) Each Section. With Scale Control. 111HD CC 97-093, nMax 10K, eMin 20 lbs. (NOTE: It is believed that LOT 844 contains the Load Cells and Electronic Controls, Read-Outs…
Consisting of but not necessarily limited to: 1- ACE Roto- Mold 950 gal Polyethylene Chemical Tank, with 2- PULSAtron® Chemical Supply Dispensing Pumps, with 1- Chem Tainer Model 969640 0A Plastic Containment Pit.
Consisting of but not necessarily limited to: 1- ACE Roto- Mold 950 gal Polyethylene Chemical Tank, with 2- PULSAtron® Chemical Supply Dispensing Pumps, with 1- Chem Tainer Model 969640 0A Plastic Containment Pit.
Consisting of but not necessarily limited to: 1- 36 in dia x 66 in high Plastic Tank, (NOTE: Appears to be a Double Wall) Domed Top having a Control Panel containing 4- PULSAtron® Chemical Metering Pumps, Mounted in an Angle Iron Frame.
Consisting of but not necessarily limited to: 1- 32 in dia x 48 in high (mol) Polypropylene Tank, 150 gal Capacity with Control Panel containing 2- PULSAtron® Chemical Metering Pumps, Mounted in Angle Iron Frame.
Consisting of but not necessarily limited to: 2- Crates: 1- Crate containing 4- Butterfly Valves 7 1/2 in. dia (approx); 1- Crate containing 12- (estimated) Butterfly Valves, 4 in. (approx) dia, Manual Closing Bonnets, Most appear to have Hand Wheels.
20 ft long U-Type, Order No PGR175-PMXS-11-00, May, 2007; Powered by TECO WESTINGHOUSE 75 hp Electric Induction Motor driving through DODGE Reduction Gear Box.
Consisting of but not necessarily limited to: 50- (mol) 36 in wide x 24 ft long Pieces; 24- (mol) 24 in wide x 24 ft long Pieces; 51- (mol) 12 in wide x 24 ft long Pieces; 11- (mol) 18 in x 24 ft long Pieces.
Consisting of but not necessarily limited to: Double Flanged Pup Joints 24 in ID x 47 in high (mol) , 8- 45° Ells, 24 in ID; 2- 24 in ID Single Flanged Pup Joints; 2- 24 in ID Single Flanged Nipples.
Consisting of but not necessarily limited to: 'I'-Beam 8 in x8 in x 25 ft long and smaller; 'H'-Beam, Many having Base Plates; 26- 'I'- 10 in x 6 in x 25 ft long (mol).
Consisting of but not necessarily limited to: 21- (mol) Pieces 24 in x 24 ft long; 24- (mol) Pieces 18 in wide x 24 ft long; 36- (mol) Pieces 12 in wide x 24 ft long; 1- 36 in 90° Cross/Junction; 1- 24 in 90° Cross/Junction; 8- Tee Junctions; 52 + (mol)…
Consisting of but not necessarily limited to: 6- 54 in long x 18 in (mol) Agitator Blades, Stainless Steel, 2- Agitator Shaft Bottom Bearing Stands 17 in high, Stainless Steel.
Consisting of but not necessarily limited to: 4- 58 in long x 45 in (mol) Agitator Blades, Stainless Steel, 3- 36 in x 14 in (mol), 1- Agitator Shaft Bottom Bearing Stand 18 in high, Stainless Steel.
AVCO Ball Valves, 100 (est) 1/2 in Socket, Material CF8M; AVCO Ball Valves, 2 in Socket, Material CF8M; Avco Ball Valves, 1 in Socket, Material CF8M; NIBCO, 4- 2 in Threaded BRS 56; PISTON Check Valves, 10 (est); SHARPE 1 in Threaded, Material 316L.
Consisting of but not necessarily limited to: 2- SQUARE D Model MH 20 WP Type 3 R Breaker Boxes; 1- SQUARE D Model MH32WP Type 3R Breaker Boxes; 2- SQUARE D Model FA100 RB, 100A Circuit Breaker Enclosure; 1- Carton EATON LKS-1 Terminal Lug Kit.
Consisting of but not necessarily limited to: 1- Box GENERAL ELECTRIC Cat. No. AQF Box AB 313 A Series Panel Board; 1- Box AMERICAN ELECTRIC LIGHTING Cat. No. ACPGSBZ Glare Shield; 2- Boxes AVCO-ALLOY VALVES AND CONTROLS INC., 1- of which is a Valve.
Consisting of but not necessarily limited to: 6- Boxes CROUSE-HINDS Cat. No. VMVM2A400GR305P23/MT, QTZ 5828, 400 watt Metal Halide Maine Type Electrical Fixture.
Consisting of but not necessarily limited to: 6- Boxes CROUSE-HINDS Cat. No. VMVM2A400GR305P23/MT, QTZ 5828, 400 watt Metal Halide Maine Type Electrical Fixture.
Consisting of but not necessarily limited to: 6- Boxes CROUSE-HINDS Cat. No. VMVM2A400GR305P23/MT, QTZ 5828, 400 watt Metal Halide Maine Type Electrical Fixture.
Consisting of but not necessarily limited to: 1- GREENLEE Cat, No. 4016GB hydraulic Oil, 1- gal.; DRAKE- WILLIAMS STEEL 6 in x 6 in Slice Plates; 14- (mol) Copper Ground Cables, Related Fittings and Hardware Consumables.
Consisting of but not necessarily limited to: 11- THE AUSTIN CO. Cat. No. AB-24208NF, 24 in x 20 in x 8 in N-4 Boxes, having 4- Boxes of Fittings and 1- Tube.
Consisting of but not necessarily limited to: 12- CROSS HINDS ® Champ ® Series Cat. No. VMVM2A400GH305P23/MT QT2 S828 Lighting Fixture Metal Halide 400 watt Maine Type.
Consisting of but not necessarily limited to: 1- Crate containing 36 (est) Boxes of CROUSE- HINDS 3/4 in Open End Clamps, 1 in to 3/4 in Hub Reducer, ETC75HD Edge Type Clamps, RAC75HD Right Angle Type Clamps, PARC75HD Parallel Type Clamps, 1- Box Copper F…
Consisting of but not necessarily limited to: 1- Box of Part No. M543-153SS Filters; 1- Box of Part No. M468-108SS Filters; 6 Boxes of GOULDS pumps pump Parts; 1- Box of Caplugs.
Consisting of but not necessarily limited to: 1-2ft x 5 ft x 20 ft long (mol); 1- 4 ft x 4 ft x 20 ft long (mol); 1- 30 in x 30 in x 18 ft long (mol); 1-24 in x 24 in x 10 ft long (mol).
Consisting of but not necessarily limited to: 20- Boxes (mol) of Varied Components of Pressure Gauges, Remote Temperature Detector (Thermo Couplers) and Related Items.
Consisting of but not necessarily limited to: 2- 30 in 90° Ells, Transitions, 6 in dia Joints, 1- Electric motor, 7- Boxes of Elevator Buckets, Plastic Safety Cage for Ladder, Expanded Metal Walkway.
Consisting of but not necessarily limited to: 7- , 2- Boxes OSECO Blow Out Tabs, 1- Box FASTENAL Fasteners, 2- Bags VON AIR Dry O Lite® Desiccant Matter.
15- Piles Containing: 2- Pieces 5 ft x 5 ft x 22 ft (mol); 1- Pieces 18 in x 5 ft x 22 ft (mol) 3- Pieces 42 in x 60 in x 42 in high (mol); Numerous 'I' and 'H' Beam, Channel and Angle Iron, Ladders, Expanded Metal Walk Ways, Hand Safety Railings.
Consisting of but not necessarily limited to: 4-36FLS-HF-HALFPC-D36FLS 24 gauge 304 Stainless Steel, 40 in x 40 in x 48 in; 8- VAN PACKER ® COMPANY Model DW, DW Plus and or ES Positive Pressure Chimney System, Part No D36STRD30.
Consisting of but not necessarily limited to: 4-Pieces (approx) Number 36FLS-HF-HALFPC-D36FLS 24 gauge 304 Stainless Steel, 40 in x 40 in x 48 in; 8- (approx) VAN PACKER ® COMPANY Model DW, DW Plus and or ES Positive Pressure Chimney System, Part No D36S…
Consisting of but not necessarily limited to: 4-Pieces (approx), Number 36FLS-HF-HALFPC-D36FLS 24 gauge 304 Stainless Steel, 40 in x 40 in x 48 in; 8- (approx) VAN PACKER ® COMPANY Model DW, DW Plus and or ES Positive Pressure Chimney System, Part No D36…
Consisting of but not necessarily limited to: 1- Electrical Resistance Heater Core 2 ft x 2 ft x 66 in (mol); 2- Fluorescent Boxes; 3- Cantilevered Metal Halide Lighting Fixtures, Pole Mounted; 1- Transformer; 1- Pile of Electrical 3- conductor with Groun…
Consisting of but not necessarily limited to: Insulated Ground Bushings, Liquid Tight Straight Connectors; Insulated Bushings, Liquid Tight 45° Connectors, 4 in to 1 in.
Consisting of but not necessarily limited to: Conduit Shapes, Universal Pipe Clamps, Liquid Tight Straight Through Connectors, Neoprene Gaskets, Push-on Conduit Strap, Sheet Steel Cover, 4 in and Smaller.
Consisting of but not necessarily limited to: 8- Joints CARLETON 4 in RIGID PVC Conduit; 2- 90° els RIGID PVC Conduit, 150 + Joints (est) of 1 1/2 in and Smaller; GCS Conduit 10 in long Joints; 25 Joints (mol) 5/8 in Copper Tubing, 10 ft long (est).
Consisting of but not necessarily limited to: Galvanized Carbon Steel, 'H'- & 'I'-Beam , Structural Member, Diagonal Braces for Building MPS-40 1078 and 1- Stack of 'I'-Beam to Construct a Bridge for Pipe Lines.
Consisting of but not necessarily limited to: 1- Crate Couplers for Cooling Rower Pumps; 1- Crate Fastenal® Fasteners, Various; 1- Crate Stainless Steel Shims, Bolts; Multi Groove Power Sheave.
Consisting of but not necessarily limited to: 1- DODGE AT7315H Reduction Gearbox; 2- DODGE Belt Safety Guards; 4- Dodge Belt Safety Guards, 5 Additional Related Items.
Consisting of but not necessarily limited to: 14- (APPROX) Part 2T 3 4 in x 1 1/2 in x 10 ft long (mol) Conduit Channel; 4 - (approx) 1 1/2 in x 1 1/2 in x 10 ft long Conduit Channel; 2- Tubes of 1/2 in (mol) x 10 ft (mol) All-Thread.
Consisting of but not necessarily limited to: 1- SPECIALTIES STRUCTURES Model SS68, 6 ft x 8 ft Portable Building, Metal Cladding Roof and Exterior Walls, Finished Inside with Paneling, Insulated, Electric Lights; (NOTE: This Unit has NO FLOOR.) 1- SPECIA…
Consisting of but not necessarily limited to: 20- Boxes (mol) FASTENAL All-Thread Studs; 1-55 gal Barrel FASTENAL All-Thread; 2- 10 gal Barrels of Cap Screws, 2- 10 gal Barrels and 4- Boxes of XHCS Pipe Fittings, 2 in and smaller.
Consisting of but not necessarily limited to: 1- 55 gal Barrel 14 in long (mol) All Thread Studs; 1- 20 gal Barrel of Hex Nuts; 1- Pallet of Hex HD Cap Screws, 7/8-9x2 1/4; 1- Pallet of HCS 1 1/8-7x3.5 Z 5 Cap Screws and Related.
Consisting of but not necessarily limited to: Order Code 50P25-ERGA1RC5B; PRO LINE Pro Mag 50 Hart, 2- Mass Flow Liquid Transmitter; 5- VERABAR RTD Temperature Sensors model V110-10-H-M; and 2- VERABAR Pressure Sensors.
Consisting of but not necessarily limited to: Surveying Grade Stakes, 1 in x 1/2 in Wood and 2 in x 2 in; Greenstreak Speed Dowel™ Concrete Dowling System; PVC Drain Pipe, Serrated and Perforated.
Consisting of but not necessarily limited to: 'L' type 1 in Galvanized Carbon Steel anchor Bolts with Nuts; 1 in GGS Bolts having 2- Hex Nuts Per Bolt; 3- Boxes of Hex Nuts (1- of which is GGS).
Consisting of but not necessarily limited to: 4- (mol) Halogen Work Lighting Fixtures on Tripod Bases; 90° 1 1/4 in Rigid GCS Conduit; 16 Barrels/Buckets/Boxes of Hex Nuts, Cap Screws, and Studs; 15- (mol) BAY-BRIGHT LIGHTING Model WLR400MMT-LP Nite Bulb…
Consisting of but not necessarily limited to: 4- Order Code 50P1F-ERGA1RCFBAAW, 1- Order Code 50P1H-ERGA1RCSBAAW, and Various Types and Sizes. (NOTE: This Lot is Divided - Portions of the Lot are Arranged Along Opposite Sides of the Building.)
Consisting of but not necessarily limited to: Flame Detectors, 2- Modulating Fluid Power Actuators, ALLEN BRADLEY Proximity Detector; HONEYWELL V5055C 1026 Industrial Gas Valves, Box 4 E-+H Model TMT142 and Similar.
Consisting of but not necessarily limited to: Wire-Wound Seals 24 in to 2 in (mol) Sizes; GARLOCK Seals and KLINGERSIL ThermoSeal; 500 + (est) total number, Various Carbon Steel Pipe Fittings.
Consisting of but not necessarily limited to: Studs, Hex Nuts, Cap Screws, Flat Washers, 1/2 in Valves, HUBBELL Electrical Conduit Fittings, GENERAL ELECTRIC High Intensity Discharge Lamps.
Consisting of but not necessarily limited to: 9- Spools Cable, Galvanized A/C 3/8 in (7x 19) 500 ft each Spool (est); 2- Rolls of Woven Polyester Fabric; 1- Roll GARLOCK Blue-Guard Style 3000 1/16 , 6-2 Gasket Material; 2- Rolls of Tar Paper.
S/N 729F810W3 is 1 x 1.5 x 6, Material of Construction - Ductile Iron, Powered by RELIANCE Electric Induction Motor, 5 hp; and S/N 729F811W3 is 2 x 3 x 6 Material of Construction - Ductile Iron, Powered by RELIANCE 7.5 hp Electric Induction Motor. Skidded…
Consisting of but not necessarily limited to: 2 x 3 x 6 Material of Construction - 316 Stainless Steel, 350 gpm, RELIANCE 15 hp Electric Induction Motor, Skidded.
Consisting of but not necessarily limited to: 3 x 3 x13 Material of Construction Ductile Iron, 100 gpm, Powered by RELIANCE 15 hp Electric Induction Motor, Skidded; with JOHN CRANE Seal Support System.
Consisting of but not necessarily limited to: Conduit Outlet Bodies; Basic Hub Connectors, 90° angle Male connector, Straight Male Connector, Type T Conduit Bodies, Polyethylene Pipe Insulation, 3 in and Smaller.