9
5.4 L Gasoline Engine, Automatic Transmission with KOBALT Aluminum Cross-Bed Tool Box, Plastic Bedliner, Toyo Spare Tire, FL Tag - JUQI03, 66,140 Indicated Miles.
10
2- 100 gal. (est.) Aluminum Saddle Fuel Tanks; Power Hydraulic Pack; FULLER 10- Speed Transmission Pack, DETROIT DIESEL Series 60 Diesel Engine, Sliding 5th Wheel, 16,924.5 Indicated Meter Hours, 338,331.3 Indicated Odometer Miles, 10- Hole BUDD Steel Whe…
11
Vista Cab, 116 in. Wheel Base, CUMMINS Diesel Engine, Hydraulic Power Pack, 24,744 Indicated Meter Hours, 10- Hole BUDD Steel Wheels, No FL Tag, Co. No. J-1.
12
Roll-on/Roll-off, Hydraulic Power Pack with Operator's Controls, 100 gal. (est.) Aluminum Saddle Fuel Tank, FL Tag - N96 86Q, 7200 Indicated Meter Hours; 110,273 Indicated Odometer Miles, 10- Hole BUDD Steel Wheels, Co. No. R-1. (NOTE: The Roll-On /Roll-O…
16
4 x 4, EFI, Gasoline, 4,333 Indicated Meter Hours. (NOTE: Tailgate is in the Haul Box, NOT Installed.)
17
Consisting of but not necessarily limited to: ANSUL Protector Pedestal Mounted Station Monitor Foam Dispenser Nozzle, Model TFTZ-477899, 250 psi Maximum Operating Pressure with Aiming Handle and On/Off Lever; 2- SCHULTZ 250 gal. capacity IBC containing An…
18
6 ft. x 12 ft. x 6 ft. tall (est.), Single Axle Trailer powered by BRIGGS & STRATTEN, VANGUARD, 23hp, 2- Cycle, V, Gasoline Engine.
20
11,000 watt Weld Generator, mounted on 4- Wheel, Tongue Steer Trailer with Leads-Rack and Leads.
22
On Single Axle Pneumatic Tires, with Cable Hook Lifting Eye, and Oxy/Acetylene Hoses.
23
On Single Axle Pneumatic Tires, with Cable Hook Lifting Eye, and Oxy/Acetylene Hoses.
26
22/35 ton, on Single Axle with Wheels; with Jack Stands consisting of but not necessarily limited to: 2- WESTWARD 22- ton with Adjustable Height Pins; 2- GREENLEE Model 687 Screw-Type Reel Stands, 2,500 lb. (est.) Capacity, with 4- Floor Jacks 5- Ton (est…
27
5 ft. x 5 ft. (est./approx.), 2- Equipped with Heavy Duty Vises.
31
150 gal. (est.) capacity with Oil Spill Containment Pallet, RUBBER MAID Caution Pylon, 1- 20 gal. (est.) Steel Barrel, 5- gal. Plastic Bucket.
32
Consisting of but not necessarily limited to: 2 in. Centrifugal Pump powered by HONDA Model WB20XT Gasoline Engine, Portable, Co. No. 95012612, Box Turnaround Joint, Miscellaneous Test Fittings, Box #969679; Material Handling Platform, Tongue Guided, moun…
35
1- for 55- gal. Drum, with 4- Wheels, 1- for 15 gal. (est.) Drum, 2- Wheel.
38
Consisting of but not necessarily limited to: RADNOR Band Saw Blade, Welding Rods, Electric Power Cords, BRUTE Trash Can containing Stainless Steel Piping with Valves (Various and Related, 1- 4 ft. wide x 7 ft. tall 2- Door Steel Storage Cabinet; 1- TENNE…
39
Portable, Mounted on 2- Axles, 4- Wheels. (NOTE: Appears to be Missing 1- Wheel.)
42
Consisting of but not necessarily limited to: 4- Shovels: 4- Round Points; 2- Yard Rakes; Pick Ax and Related, LPG Bottle.
46
Containing 3- Pumps, Tank and Exchanger Modules with Piping Manifold, PVC; on Pallet.
47
1900 deg. F, Board Insulation, 2 in. x 2 in. x 36 in., 14-55 lb. Buckets of SHAMROCK 885 Plastic.
48
And 7- (approx.) RED FLINT Sand and Gravel LLC., Filter and Industrial Sand, 50 lb. Bags.
50
2- Super Sacks and 12 (approx.) MORGAN Tri-Mor Monolithics, 1- Super Sack Beads, (NOTE: Sack has Split Open and Beads are on the Floor.) 1- Super Sack BAG CORP Bags (Mfg. 02/2016) 255- Pieces (approx.); on 2- Pallets.
51
40 in. dia. (est.) with 2- Pieces Auger Flights, Bits and Other; on Pallet.
52
2- BF GOODRICH, 385/65R22.5, 1- LING LONG, F816 11R22.5, 16 Ply, Tubeless. (NOTE: Appear to be NEW/UNUSED.)
53
Consisting of but not necessarily limited to: QIG CR 70 GP, 2- Pallets have 20- pieces of Course 1 Brick, 20- Pieces of Course 2 Brick; on 5- Pallets (approx.).
55
MEROPA 320, GST Oil ISO46; ULTRA DUTY Grease EP NLGI 2 and Others; on 4- Pallets.
59
With Recycle Bin, Portable; with contents of 2- Air hoses, Hydraulic 'Bottle' Jack, Grease Gun Manual and Related Consumables.
60
Consisting of but not necessarily limited to: 5- Rakes: 2- 16 in., 3- 30 in. (est.); 2- Push Brooms, 5- Shovels, Pitch Fork, Floor 'Caution' Pylon and Related.
62
3- Bags of Sakrete and 9- (approx.) Bags of Kaolite 2200. (NOTE: 2- Opened, Partial Bags.)
63
Consisting of but not necessarily limited to: 2- JUST RITE Drum Management System Stock Module, Item No. 28669, 2- JUST RITE Dispensing Shelf, 2- JUST RITE Base Modules; with 8- 55 gal. Drums containing but not necessarily limited too CHEVRON Hydraulic Oi…
64
48 in. x 48 in., Spill Kit, 2- Boxes DUPONT Personal Protection, 3-1/2 gal. (est.) Jug of TRASOR TRAC104.
65
3,000 psi, Portable, powered by Gasoline Air Cooled Engine, WESCO Lift, and Line Stripping Machine.
66
Stainless Steel, Co. No. JB-CIOC-SPARE. (NOTE: Only equipped with Terminal Strip Internals.)
67
2- Sections of Pallet Rack Shelving, 8 ft. high x 48 in. deep x 8 ft. long (approx.), Each Section having 2- Shelves, Wire Shelf Flooring.
68
Consisting of but not necessarily limited to: Series 7373T BLUE THUNDER UHMW Tube Max WP 200 psi 549 having Stainless Steel QC End Fittings.
69
Consisting of but not necessarily limited to: UNAFLEX Type 536 Steam Hose, Water Pressure 250 psi, 3 in. dia. x 15 ft. long (est.) 1-3 in. and 1- 1/12 in; 4815 Steam EPDM WP 200 psi 17.2 Bar Drain After Use and Related, Fire Hose, 2- (approx.) 1 in. dia. …
71
FLARE PILOT 100 1/16" 270-TE-07427 G, Primary Fuse 5KV 1A Kit, Co. No. 95011459; 3- Boxes 3M Cold Shrink; 1- Wooden Crate- Contents Unknown.
72
5- 15 in. dia. (Overall) (est.) ATV Pneumatic Tires, 4- Appear to be Used; 2- 4 in. dia. (est.) Stainless Steel Screens, 1- Hand Powered Tool and Related;1- 3/4 in. dia. (est.) Extra Heavy 2- Hose Pipe Manifold for Connection to an Air Compressor. 'Crow's…
73
Powered by WEG 7.5 hp Electric Motor mounted on 90 gal. (est.) Horizontal Air Receiver Tank.
74
Consisting of but not necessarily limited to: SAMPSON Pump 3 Master Grease Pump, with CHEVRON 20 gal. (est.) Grease Barrel mounted in 2- Wheel Material Handling Hand Truck.
77
Consisting of but not necessarily limited to: 3- Butterfly Valves, 12 in. dia. (approx.); Centrifugal Pump Housing; 6 in. ID (approx.) Stainless Steel Valve; 2- Valve Closing Gears with Hand Wheels; on 4- Pallets.
78
1- 105 gal. (est.), 2- 95 gal. (est.), Mounted on Single Axle Trash Can Dolly and Brute Trash Can.
80
Consisting of but not necessarily limited to: 9- Bundles (approx.) of 1 in. dia. and smaller of Galvanized Pipe/ Conduit, 2- Joints of 6 in. dia. x 20 ft. long (approx.), 2- Joints 3 in. dia. x 20 ft. long (approx.) Stainless Steel Pipe, 15- Joints (appro…
81
Communication and Instrumentation Wire, Various and Assorted.
82
Consisting of but not necessarily limited to: 3- Sheets (approx.) of 1/2 in. thick x 4 ft. x 8 ft. long (est.) Stainless Steel (NOTE: 2- Sheets appear to be Full/Uncut), 3- Sheets of 1/4 in. thick x 4 ft. x 8 ft. (est.) Carbon Steel, 1- Sheet of 3/4 in. t…
83
Consisting of but not necessarily limited to: 6- 8 ft. long (est.) Upright Supports, 16 (approx.) Shelf Support Pieces.
84
Consisting of but not necessarily limited to: 15- Joints (approx.) 8 in. to 2 in. dia. (est.) x 20 ft. long and shorter; 25- Joints (approx.) 2 in. dia. x 6 ft. long (est.) with Both Ends Plugged; 25 Pieces (est.) Thin Wall Conduit Various Sizes, Shapes a…
85
Consisting of but not necessarily limited to: 8 in. and smaller Stainless Steel and Carbon Steel, PVC, Fabricated Pieces, Fittings, and Related, 6- Fabricated Industrial Gas Bottle Storage Frames, 4- (approx.) Tippers/Trash Tubs; with 6- Pallets (approx.)…
88
Consisting of but not necessarily limited to: 4-3/4 in. (est.) Stainless Steel, Gear Type Pumps, Each Individually powered by BALDOR 1/2 hp (est.) Electric Motors with 1/2 in. (est.) Stainless Steel Piping Manifold having 8- DPRO Stainless Steel Valves an…
92
250 gal. capacity, Co. No. D-0309 and Co. No. D-0303.
96
44 in. high x 7 ft. wide x 19 ft. 10 in. long (approx.) having Modified V-Bottom, Flared Sides. (NOTE: This Unit is mounted on, BUT being SOLD SEPARATELY from, LOT 12.)
97
44 in. high x 7 ft. wide x 19 ft. 10 in. long (approx.) having Modified V-Bottom, Flared Sides.
98
4 ft. wide x 4 ft. long x 3-1/2 ft. high, mounted on 4- Metal Wheels.
99
(NOTE: 6- of the 10 Spools appear to be Partial); Consisting of but not necessarily limited to: OKONITE 4 500 KCMIL Compact CU Okoguard EP PVC Shield 15 KV 133% Ins Level 220 Mils (UL) MV5 SUN Reserve for CT Use FT4 JC or CSA LL 396 FT4 LTGG SR and Simila…
100
10 ft. 6 in. high x 8 ft. wide x 36 ft. long (approx.), having KRAUSE MANUFACTURING INC. 56 in. wide (approx.) Flat Belt Conveyor Co. No. Z-0101, powered by KRAUSE MANUFACTURING INC. Geared Speed Reduction Unit having Electric Motor. With CP MANUFACTURING…
102
Powered Flat Belt having Troughing Rollers, 56 in. x 100 ft. long (approx.) Co. No. S-0105; powered by Electric Motor driving through Reduction Gear Box.
103
68 in. wide x 45 ft. long (approx.) 3/4 in. Stroke, 317 RPM, Powered by TOSHIBA 10 hp Electric Motor.
104
10 ft. 6 in. high x 34 in. wide x 10 ft. 6 in. deep (approx.) OD, having Blanket Exterior Insulation, 2- Steam-in/Condensate-Out Zones, with Piping Manifold and Control Valves, Manually Operated; having Fluid Bed Dryer Air Supply Ducting, 5 ft. high x 4 f…
105
43 ft. 6 in. tall x 12 ft. 8 in. wide x 35 ft. long (approx.) OAD, Reverse Pulse Jet Type, 714 Bags, Carbon Steel, Material of Construction, 60,765 acfm Capacity; Fully Insulated, having Corrugated Aluminum Exterior Jacket, V-Hopper Bottom containing a Sc…
106
16 in. wide x 15 ft. long (approx.) having Steel Tubing Trussed Frame, powered by Electric Motor driving through Reduction Gear Box; Co. No. 105-M- S0113; with MAC Rotary Air Lock powered by BALDOR Electric Motor driving through Reduction Gear Box, Co. No…
107
For use with Trash/Refuse Roll-On / Roll-Off Compactor Unit., Co. No. T1.
108
For Bag House to Exhaust Fan, 60 in. dia. x 60 ft. long (est.) OAD having 2- 90 deg. long Sweep Ells, fully Insulated with Corrugated Aluminum Metal Jacket.
109
Wheel Size and Type: 495AF, Co. No. C- 0101; powered by TOSHIBA 300 hp, 460 V, 1800 rpm, Electric Motor, s/n 091100038.
110
36 in. dia. x 45 ft. high (est.) Fully Insulated Base Section to about 8 ft. tall having Corrugated Aluminum Metal Jacket and 16 ft. high (est.) Single Wrap Blanket Insulation, Co. No. X-0101. With DUCT WORKS: For Fan to Steam Heater, 7 ft. high x 38 in. …
111
Containing 2- ALLEN BRADLEY Panel View 600 HDMI Units, 1- Each for Co. No. E-0101 and E-0102; with High Voltage Emergency Stop/Reset Cabinet.
113
56 in. wide x 105 ft. long (approx.) Drag Flat Belt Conveyor Co. No. Z-0103; having 35 deg. (approx.) Inclined Section 56 in. wide x 105 in. long (approx.).
115
Consisting of but not necessarily limited to: Package Upper and Lower Chambers; Ash Upper and Lower Chambers; Upper and Lower Burners; Upper and Lower Fans; Air Separator; Compression Tanks; Ash Quench Drag Chain Conveyor powered by Electric Motor driving…
116
Having 2- Hydraulic Pumps, Each independently powered by CROWN TRION 25 hp Electric Motor, Hydraulic Oil Reservoir, Co. No. TK-0220; Motor Starter Control Boxes.
118
Having 2- Pumps individually powered by TOSHIBA 7.5 hp (est.) Electric Motor Air Separator. Co. No. TK-0214; Surge Tank, Co. No. TK-0216, with Motor Control Panel, Co. No. 110-M-E-0103; MCC-2A 8FM, with TRAC-104 5 gal. Tank.
122
12 ft. high x 8 ft. wide x 20 ft. long (est.) having 15 ft. long (approx.) 45 deg. Incline Section with Sink Chain Skimmer Bars of the Ash Quench Conveyor, with Burn-Out Pan and Ash Ram. Co. No. S-0203; Operator's Remote Control Pedestal consisting of but…
123
Having 2- Hydraulic Pumps, Powered by 2- Electric Motors with Train 1 Main Disconnect Electrical Control Box, Stainless Steel. (NOTE: No Co. No. Located.)
124
3 ft. high x 8 ft. wide x 25 ft. long (est.) OAD with Independent Hydraulic Power Package, Co. No. TK-0212; having 2- Hydraulic Pumps, Each Independently powered by Electric Motor, Hydraulic Oil Reservoir Tank, and Controls.
126
Consisting of but not necessarily limited to: 4 in. Carbon Steel Piping, 3- FISHER Type 6072 - Size 70 Valves and Actuators. Size 1-1/2 Valves and Actuators; 4 in. Flanged, Stainless Steel Piping, 2- Ball Valves; 1- Check Valves; 1- FLO-TITE 2-1/2 in. Bal…
130
Co. No. E-0201, Fully Insulated, having Speckled Aluminum Exterior Metal Jacket; 6 ft. dia. x 30 ft. - 50 ft. tall (est.) MAWP 700 psig, 13423 sq. ft. Heating Surface. 22,000 lbs./hr. heating capacity, High Pressure 700 psig @ 550 deg. F, Low Pressure 130…
131
16 in. wide x 12 ft. dia. (approx.) size 840/840 External Dimensions, R13A 52,417 @ 55 in. W. G. CFM, SI (115%) SW, 1800 max rpm, powered by SIEMENS Electric Motor, 700 hp Co. No. C-0204; with Intake and Exhaust Duct Transitions.
132
Co. No. D-0771, 2900 gal. Capacity, Code: ASME - No Stamp, 1.0 r.g., 480 deg. F Design Temperature;. With ORION INSTRUMENTATION Sight Gauge, Stainless Steel, 4 in. high (approx.).
134
Consisting of but not necessarily limited to: 8- Stainless Steel, Weather Proof Boxes, 4- each for R-1 and T-2 VFDS Eductor System Co. No. SIC-12907 and Co. No. SIC-12911 and SIC-22907 and Co. No.SIC-22911; Co. No. CIOC 110K and Co. No. H3PNL Feed from HV…
135
Co. No. E-0203, Fully Insulated having Speckled Aluminum Exterior Metal Jacket.
136
Consisting of but not necessarily limited to: 1- Plate and Frame Heat Exchanger, Fully Insulated, 1- 18 in. tall (est.) Sight Gauge, with Piping Manifolds and Control Valves 2- 6 in. Pressure Relief Valves, FISHER Valve and Actuator, Fully Insulated with …
137
Consisting of but not necessarily limited to: 2- FISHER Valves with Actuators, 4- 2 in. Manually Actuated Valves, 2- Pressure Relief Valves, 2- PULSCO Gas Explosion Valve.
140
Co. No. D-0216, Having 2- FISHER Valves and Actuators, 12 + (approx.) Rising Stem Valves, Fully Insulated having Aluminum Exterior Metal Jacket with Piping and Valve Manifold, consisting of but not necessarily limited to: 2- Pressure Relief Valves; 2- ROS…
141
Co. No. E-0215, 5 ft. dia. x 30 ft.tall (est.) fully Insulated having Aluminum Metal Exterior Jacket, with In-Take and Out-Put Piping, 30 in. dia. Fully Insulated.
150
14 in. x 84 in. dia. (approx.) OAD, 11,333 ACF MC 27.5 in. W. G. Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201A.
151
14 in. x 84 in. dia. (approx.) OAD, 11,333 ACF M @ 27.5 in. W. G. Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201B.
152
14 in. x 84 in. dia. (approx.) OAD, 11,333 ACFM @ 27.5 W. G., Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201C.
153
Co. No. T-0704A; With Piping, 12 in. dia. (est.) Butterfly Valve and Controls. With RAYCHEM HEAT TRACING CONTROLLER ASSEMBLY: 920 Series, Model 920 deg. E4FWL*SIS302*SSH3202*T45 With DIGI TRACE Unit and ACT American Controls, Knife Gate, Manually Operated…
154
Co. No. F-0201 A & B, HAVING 2- PLATTCO Isolation Valve Control Panels and 2- 4- Control Box for Air Control Valves, PLATTCO Vibrator Galvanized Valve and Proxim Switch. (NOTE: A is for Train 1, and B is for Train 2.)
200
10 ft. 6 in. high x 8 ft. wide x 36 ft. long (approx.), having KRAUSE MANUFACTURING INC. 56 in. wide (approx.) Flat Belt Conveyor, Co. No. Z-0102; powered by KRAUSE MANUFACTURING INC. Geared Speed Reduction Unit having Electric Motor. Co. No. Z-0102. With…
201
Tipper No. 4; 2- Safety Ladders, Portable, 1- 5- Steps High and 1- 3- Steps High.
202
Powered Flat Belt having Troughing Rollers, 56 in. wide x 50 ft. long (approx.), Co. No. S-0106; powered by Electric Motor driving through Reduction Gear Box.
204
10 ft. 6 in. high x 34 in. wide x 10 ft. 6 in. deep (approx.) OD, having Blanket Exterior Insulation, 2- Steam-in/Condensate-Out Zones, with Piping Manifold and Control Valves, Manually Operated; having Fluid Bed Dryer Air Supply Ducting, 5 ft. high x 4 f…
205
43 ft. 6 in. tall x 12 ft. 8 in. wide x 35 ft. long (approx.) OAD, Reverse Pulse Jet Type, 714 Bags. Carbon Steel, Material of Construction, 60,765 acfm Capacity; Fully Insulated, having Corrugated Aluminum Exterior Jacket, V-Hopper Bottom containing a Sc…
206
16 in. wide x 15 ft. long (approx.) having Steel Tubing Trussed Frame, powered by Electric Motor driving through Reduction Gear Box; with MAC Rotary Air Lock powered by Electric Motor driving through Reduction Gear Box; Co. No. 105-M- S0114.
207
For use with Trash/Refuse Roll-On / Roll-Off Compactor Unit, Co. No. T2.
208
For Bag House to Exhaust Fan, 60 in. dia. x 60 ft. long (est.) OAD having 2- 90 deg. long Sweep Ells, fully Insulated with Corrugated Aluminum Metal Jacket.
209
Wheel Size and Type: 495AF, Co. No. C- 0101; powered by TOSHIBA 300 hp, 460 V, 1780 rpm, Electric Motor, s/n 110306066. Co. No. C-0201.
210
36 in. dia. x 45 ft. high (est.) Fully Insulated Base Section to about 8 ft. tall having Corrugated Aluminum Metal Jacket and 16 ft. high (est.) Single Wrap Blanket Insulation. With DUCT WORKS+H183: For Fan to Steam Heater, 7 ft. high x 38 in. wide increa…
213
56 in. wide x 105 ft. long (approx.) Drag Flat Belt Conveyor; having 35 deg. (approx.) Inclined Section 56 in. wide x 105 in. long (approx.), Co. No. S-0104.
215
Consisting of but not necessarily limited to: Package Upper and Lower Chambers; Ash Upper and Lower Chambers; Upper and Lower Burners; Upper and Lower Fans; Air Separator; Compression Tanks; Ash Quench Drag Chain Conveyor powered by Electric Motor driving…
216
Having 2- Hydraulic Pumps, Each independently powered by CROWN TRION 25 hp Electric Motor, Hydraulic Oil Reservoir, Co. No. TK-0210, Motor Starter Control Boxes.
218
Having 2- Pumps individually powered by TOSHIBA 7.5 hp (est.) Electric Motor Air Separator. Co. No. TK-0226; Surge Tank, No. E-0226, with Motor Control Panel, Co. No. 110-M-E-0203; MCC-2A 8FM, with TRAC-104 5 gal. Tank.
222
12 ft. high x 8 ft. wide x 20 ft. long (est.) having 15 ft. long (approx.) 45 deg. Incline Section with Sink Chain Skimmer Bars, with Burn-Out Pan and Ash Ram, with Ash Sump Pump; Operators Control Pedestal consisting of but not necessarily limited to: 3-…
223
Having 2- Hydraulic Pumps, Powered by 2- Electric Motors with Train 1 Main Disconnect Electrical Control Box, Stainless Steel, Co. No. MCC-5A-7RF.
224
3 ft. high x 8 ft. wide x 25 ft. long (est.) OAD with Independent Hydraulic Power Package, Co. No. TK-0222; having 2- Hydraulic Pumps, Each Independently powered by Electric Motor, Hydraulic Oil Reservoir Tank, and Controls.
225
Consisting of but not necessarily limited to: SALVATORE ROBUSCHI Model T1PORB 250 35 AR C181 3, Centrifugal Pump, 12 in. x 12 in. (est.), Material 21600A, Co. No. P-0357 powered by ABB 75 kw Electric Motor, s/n 3 GP 12034594, Unitized and Mounted on Fabri…
226
5- 3 in. OD (est.) Tubing Loops, Each Insulated with Corrugated Aluminum Metal Exterior Jacket; (NOTE: 1 ft. (approx.) of each Tube and the 180 deg. Fitting are not Insulated.), Co. No. E-0357, Condensation Tank Co. No. D-0357; with 1313 liter capacity, w…
227
5951 Liter Capacity, With Conical Hopper Bottom, Fully Insulated having Dimpled Aluminum Exterior Metal Jacket.
228
Co. No. E-0355, 24 in. (approx.) overall dia., fully insulated, with Dimpled Aluminum, Exterior Metal Jacket.
229
Stainless Steel, Co. No. E-0356; With Overhead Condenser, Stainless Steel, Horizontal, 18 in. dia. x 10 ft. long (est.) Uninsulated, Co. No. F-0356; with GRUNDFOS, Cooling Booster Pump, Type NK100-160/165A1F2AE-SBAOE, Powered by Electric Motor, Co. No. P-…
230
Consisting of but not necessarily limited to: 4 in. Carbon Steel Piping, 3- FISHER Type 6072- Size 70 Valves and Actuators. Size 1-1/2 Valves and Actuators; 4 in. Flanged, Stainless Steel Piping, 2- Ball Valves; 1- Check Valves; 1- FLO-TITE 2-1/2 in. Ball…
231
Consisting of but not necessarily limited to: ALLEN BRADLEY PanelView Plus 1000 HDMI Unit and Other, Co. No. MCC-3B-4FG.
232
Consisting of but not necessarily limited to: FISHER 4 in. Type V150, WCC/1.0619 Valve and Actuator, 2- manual 4 in. Gate Valves, 2- Pressure Gauges.
234
WCB, 6 in. Flanged, DI, Material of Construction. Class 150, Manually Operated.
235
16 in. wide x 12 ft. dia. (approx.) size 840/840 External Dimensions, R13A 52,417 @ 55 in. W. G. CFM, SI (115%) SW, 1800 max rpm, powered by SIEMENS Electric Motor, 700 hp Co. No. C-0206.
239
With Piping Manifolds and CONSOLIDATED Control Valves 2- 2 in. Pressure Relief Valves, FISHER Valve and Actuator, Fully Insulated with Crinkled Aluminum Full Metal Jacket, PULSCO Gas Explosion Valve.
240
Co. No. E-0202; 5 ft. dia. x 35 ft. tall (est.) OAD, Fully Insulated with Aluminum Exterior Metal Jacket, M.A.W.P. 700 psig, 15, 423 sq. ft. Heating Surface, 22,000 Lbs./ Hr. Steam Capacity.
241
Co. No. D-0218, 3 ft. dia. x 4 ft. long, Fully Insulated having Aluminum Exterior Metal Jacket with Piping and Valve Manifold consisting of but not necessarily limited to: FISHER Valve and Actuator, 9- (approx.) Manually Operated Gate Valves, 2- ROSEMONT …
243
Co. No. E-0204, With 7 ROSEMONT HDMI, 1- Plate and Fin Type Heat Exchanger.
244
Consisting of but not necessarily limited to: 2- FISHER Valves with Actuators (4- approx.) 4 in. to 2 in. Manual Valves, 5- ROSEMONT HDMI Instruments and Related.
245
2,900 gal. capacity, 6 ft. dia. x 12 ft. long, Carbon Steel, Material of Construction Co. No. D-0772. With 2- KING 6 ft. tall, Stainless Steel Sight Gauges.
246
14 in. x 84 in. dia. (approx.) OAD, 11,333 ACF MC 27.5 in. W. G. Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201A.
247
14 in. x 84 in. dia. (approx.) OAD, 11,333 ACF M @ 27.5 in. W. G. Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201B.
248
14 in. x 84 in. dia. (approx.) OAD, 52,417 ACFM @ 55 W. G., Insulated with Aluminized Film Exterior, powered by SIEMENS Type SD 100 IEEE 100 hp Electric Motor, with Transition Duct Work, Fully Insulated Industrial Centre, Co. No. C-0201C.
249
Co. No. T-0704B; With Piping, 12 in. dia. (est.) Butterfly Valve and Controls.
250
Consisting of but not necessarily limited to: 2- FISHER Type V150 Valves and Actuators, Co. NO. PV-12913 and PV-12909; 1- KING 7750 Series Flowmeter, 4- ROSEMONT HDMI Instruments, 2- Valves Co. No. HV-22904A and HV-22904B, 2- Electric Motors, Co. NO. M-01…
251
32 in. dia. X. 102 in. high. Co. No. D-0230, MAG TECH Sight Gauge, Stainless Steel, 2- CENTRAL SOUTHERN Valve Actuators, Co. No. HV-22901 and HV-12901, 2- FISHER Valves and Actuators.
252
Consisting of but not necessarily limited to: Super Sack Unloading Station having Geared Chain Hoist Lift, Attachment, Jig, and Hopper.
253
Carbon Steel, Bolted, Skirted, 10 ft. dia. x 35 ft. high, having 2- Cone Hopper Bottoms, Each with 2 Rotary Air Locks and 2- AIR FLOAT Material Transport for each independently powered by Electric Motor, Tank is mounted on 4- Load Cells, Climbing Ladder a…
255
Co. No. 250-D-0801, SA 516-70, Material of Construction, Fully Insulated with Pebbled, Aluminum Jacket.
256
Co. No. D-0802; With 2- FISHER Valves with Actuators, Fully Insulated with Pebbled, Aluminum Jacket.
258
Molded Plastic, 2,500 gal. capacity, Flat Bottom, Fully Enclosed, Domed Top with Access Hatch.
259
Consisting of but not necessarily limited to: Systems Pre-filter -N- Cartridge Unit; MILTON ROY Metering Pumps; DARD Air Conditioning Unit; 6- Tanks-Sodium Hypochlorite; 2- GRUNDFOS PUMPS and ASSOCIATED EQUIPMENT CO., Co. No. 250-U-0801; Electrical Contro…
261
Consisting of but not necessarily limited to: Air HCN Scrubber, 8 ft. dia. 25 ft. Tower; Co. No. T-0209, 316L Stainless Steel.
262
Powered by BALDOR 10 hp Electric Motor Co. No. P-0209B and P0209A; With 2- MILTON ROY Metering Pumps; FISHER Type V150 Valve and Actuator, Each with John Crane Actuator; with 3 in. and 4 in. dia. Stainless Steel Piping Manifolds to Connect, Compound and C…
263
Fiberglass, 132 in. dia., Packing Material- Polypropylene, Material of Construction: FRP Derakane 470, HMI Stripper, Co. No. T-0208.
264
With Piping and valve Manifold, Each independently powered by TOSHIBA 30 hp Electric Motor Co. No.: P-0208A and P0208B; with Piping Stainless Steel and Valve Manifold having 2- FISHER V-150 Valves and Actuator and Gauges.
265
72 in. dia. x 48 ft. Tall, 316 L Stainless Steel Material, Co. No. T-0207, having MAGNATECH Stainless Steel Sight Gauge.
266
Powered by BALDOR 10 hp Electric Motor Co. No. P-0207A; With 2- MILTON ROY Metering Pumps; FISHER Type V150 Valve and Actuator, Each with JOHN CRANE Actuator; with 3 in. and 4 in. dia. Stainless Steel Piping Manifolds to Connect, Compound and Cross Flow P…
267
Powered by TOSHIBA 300 hp Electric Motor, Co. No. C-0208, having a 30 in. dia. Intake Duct Work with Rain Cap and 30 in. Butterfly Valve Air Damper.
268
API Standard 650, 11th Edition Appendix, S, J, F and V, 23,828 gal. nominal capacity 14 ft. dia. x 20 ft. tall (approx.), Carbon Steel, Co. No. TK-0814, with ORION INSTRUMENTATION 20 ft. Sight Gauge.
269
iFrame, Each Individually powered by TECO WESTINGHOUSE Max-E2/841 10 hp Electric Motor, Co. No. P0814A and P-0814B.
270
Consisting of but not necessarily limited to: 5- 4 in. 150 Series Stainless Steel Gate Valves, 2- 3 in. 150 Series Stainless Steel Gate Valves, 2- ASHCROFT Pressure Gauges; with FISHER Valve and Actuator, Stainless Steel, with VELAN 3 in.
271
6 in. dia.; 1-6 in. Rising Stem Gate Valve, manually operated; 1- Vertical Surge Tank, 15 gal. (est.) capacity; CROSBY Pressure Relief Valve and Exhaust Pipe.
272
With Piping Manifold, Pressure Gauges, Control Valves, Fork Lift Gas Cylinder Rack.
274
Consisting of but not necessarily limited to: 6 in. and 4 in. Stainless Steel having CRANE 6 in. WCB Gate, Stainless Steel, 4 in. Butterfly, 3- FISHER Valves and Actuators; Co. No. CWS-110-1082 and CWR-110-1055; and Related Items.
275
Each independently powered by TECO WESTINGHOUSE 20 hp Electric Motors, Co. No. P-0201A and P-0201B.
276
8 in. dia., Stainless Steel, having 2- SUREFLOW EQUIPMENT, INC. 8 in. Stainless Steel Strainers, 2- POWELL 8 in. 150 CF8M Gate Valves, 7- 1 in. and 2- 1/2 in. Ball Valves, Stainless Steel, and Related Items.
278
6 ft. dia. x 27 ft. 4 in. Tall, 316 L, Material of Construction; Stainless Steel; U, W and RT 4 Stamped, Co. No. T-0201, having ORION 4 ft. 6 in. Sight Gauge, Stainless Steel.
279
Consisting of but not necessarily limited to: WATSON MCDANIEL Pressure Material Steam Pump, Snap Assure, s/n 4022, Date Code AA1, WILDEN or similar, 3/4 in. Stainless Steel Diaphragm Pump, Pressure Regulator and Valve, 17 in. dia. x 35 ft. long. (est.), S…
280
L-Shaped Elevated Platform having FISHER Stainless Steel Valve and Actuation and Related Valves and Controls.
281
316L Stainless Steel, Material of Construction, Fully Insulated having Aluminum Metal Exterior Jacket, Co. No. D-0202, having ORION 10 ft. tall Sight Gauge, SA240-316L - Stainless Steel, Material of Construction.
282
Consisting of but not necessarily limited to: 2- ENERVAC Part No. E11957, Stainless Steel Filter, Nat. Bd. No. 229 and 230, for Tower No. 1 and 2, Co. No. D-0206A and Co. No. D-0206B, with 2-HEADLINE 55 Filters, Co. No. F-0202 and Co. No. F-0204, 4- Valve…
283
Having Piping, Control Valves and Hoses and 2- DURA Stainless Steel Hose Racks.
284
10,974 CFM, Water Cooled powered by SIEMENS, Model 3004860947-60, 2500 hp, Electric Motor, s/n 3004860947-60, with Stainless Steel, Operator's Control and Instrumentation Control Cabinet powered by Electric Motor, Co. No. C-0203, VFD-SG04, Unitized and Mo…
285
Stainless Steel, Co. No. D-0204, with ORION 3 ft. 8 in. Sight Gauge, Stainless Steel; FISHER Valve with Actuators.
286
2- Fans, Up Draft, Horizontally Mounted on 4- Elevated Legs, Co. No. C-0206A.
288
12 in. and 6 in. dia., fully insulated with Blankets having 1- Each FISHER Type 2052 Valves and Actuators, Co. No. TV-3040 and N/A; Manually Operated 4 in. Butterfly Valve.
289
With Piping Manifold, 4 In. OD having 2- FISHER Valves with Actuators, 10- 1 in. Valves; Piping Insulation having Aluminum Metal Exterior Jacket; With 8- ROSEMONT Instrumentation Read-Outs.
291
Co. No. P-0301A, Independently powered by TECO WESTINGHOUSE Max-E2/841 100 hp Electric Motor.
292
Co. No. P-0301B, Independently powered by TECO WESTINGHOUSE Max-E2/841 100 hp Electric Motor.
293
16 in. OD (approx.), Stainless Steel, Flanged Tee, (NOTE: 1- for each Pump.) 2- Butterfly Valves and Related Items.
294
Second Growth Fermenter Cooler, Stainless Steel, Co. No. E-0341.
295
Powered by TECO WESTINGHOUSE 5 hp Electric Motor, Co, No, P-0341, with Piping Manifold, 4 in. Stainless Steel having Butterfly Valve; with Check Valve.
296
Consisting of but not necessarily limited to: 2- PENTAIR Sudmo, with NORIT IntellliTop 2.0 Dolas, having 2- FISHER Valves and Actuators, and 1- CAMERON Butterfly Valve, 1- 4 in. and 1- 1 in. Piping; with 2- ROSEMONT HDMI Units.
297
Having 4- DURA-LOOP Stainless Steel Hose Racks and 2- Hoses. (NOTE: 1- Apparently Unused-still in OEM Shrink Wrapping).
298
Consisting of 2- 2 in. (approx.) x125 ft. long (approx.) having Valves with AIR-CON Actuator manifold Lines with SWEDGELOCK Valves with Gauges, Stainless Steel, 6- on Train 2 Line, 7- on Train 1 Line. 2- CROSBY NCB/WCC Pressure Relief Valves; 6- Concrete …
300
125,119 gal. capacity, 22 ft. dia. x 66 ft. TT, 316L Stainless Steel, Material of Construction, Domed Top and Bottom, CHEMINEER Agitator, powered by Electric Motor, Knock-Out Drum, Process and Utility Piping and Valve Manifold, Instrumentation and Contact…
301
5,865 gal. capacity, 8 ft. dia. x 24 ft. tall, 316 L Stainless Steel, Material of Construction. Co. No. R-0340; Domed Top with Skirted Bottom, CHEMINEER Agitator powered by Electric Motor mounted on Top. With INSTRUMENTS AND VALVES: Consisting of but not …
302
Consisting of but not necessarily limited to: 2- NSF 35 gal. (approx.) capacity and 3- USF 25 gal. (approx.) capacity Plastic Tanks, Co. No. A1, A2, A3 and MILTON ROY Sulfide Injection Pump, Seed Fermenter Tank, Stainless Steel, Co. No. R-0302; Seed Ferme…
303
316 L, Stainless Steel Material of Construction, 366 gal. capacity, 3 ft. dia. x 9 ft. 10 in. tall (approx.) Co. No. R-0330, with 4- ENDRESS & HOUSER Liquiline M CM42, Co. No. AT-2717A and AT-3717B and AT 3718A and AT3718B, MULLER First Growth Fermentatio…
304
Consisting of but not necessarily limited to: 7 in. and 3 in. dia. Stainless Steel Lines having 2- FISHER Valves and Actuators; 2- OD Stainless Steel Lines having FISHER Valve and Actuator; 1- KING and 1- BROOKS Sight Gauges; Digital Instrument Read-Out.
305
1- Manifold for Seed, 1st Growth, and 2nd Growth Sight Gauge Panel, Consisting of but not necessarily limited to: 3- BROOKS Sight Gauges, Co. No. FI-03828A and FI-0328B and FI-03289, with 11 Valves; 1- Manifold Containing MICRO-MOTION Coriolis Flow Meter,…
306
Co. No. CE-0102, Low Pressure Gasifier Relief Burner Section, 17 ft. 6 in. OD x 36 ft. OAH; A 36 Carbon Steel, Material of Construction, Co. No. Z-0203, with Blow Dry Pots, Co. No. D-01-01; and D--01-02; Condensate Pots, Co. No. D-01-08 and C. No.D-01-09;…
308
iFrame, powered by TOSHIBA 3- HP Electric Motor, with Piping Manifold having 4- Valves, and ROSEMONT Instrument Transmitter, Co. No. LT-2200.
310
3 ft. dia. x 8 ft. Stainless Steel, Co. No. D 0316. 370 gal. capacity, having ORION INSTRUMENTS 5 ft. 6 in. tall Sight Gauge.
314
MicroMotion Controller with 2- FISHER Valve and Actuator; with 3- ROSEMONT Digital Instrumentation Read-out Meters.
315
15,000 gal. capacity, 13 ft. dia. x 15 ft. high, 316L, Material of Construction, Skirted, Co. No. TK-0319; ORION INSTRUMENTS 15 ft. tall Stainless Steel Sight Gauge.
316
Stainless Steel, 2-1/2 in. x 2 in. (est.) powered by LEESON 3.0 hp Electric Motor, Co. No. P-0360.
318
Stainless Steel, with Vent Flare, 10 in. (approx.), 3- FISHER Valves with Actuators, and 3- Manual Valves.
320
Consisting of but not necessarily limited to: ORION INSTRUMENTS 2 ft. 3 in. Sight Gauge, Stainless Steel, Flanged Gate Valves, 2- ROSEMONT Instrument Read-Outs; FISHER Valve and Actuator, 2- Pressure Gauges, 11- (approx.) 1 in. and 2 in. Valves.
321
Having Stillage Plate and Fin Heat Exchanger, Co. No. E-0401, with Piping Manifold, Stainless Steel and Carbon Steel,, having 4- 6 in. Gate Valves.
322
Consisting of but not necessarily limited to: 2- Stillage Cooler Outlet 8 in. dia. (est.), Stainless Steel Piping with 8 in. Stainless Steel Butterfly Valve, Uninsulated, 2- Cooler Inlet, 8 in. (est.) Stainless Steel Piping, 1- Fully Insulated with Alumin…
323
Co. No. D-0810, Fully Insulated with Aluminum Exterior Metal Jacket, ORION INSTRUMENTS Stainless Steel, 12 ft. tall (est.) Sight Gauge.
324
Consisting of but not necessarily limited to: 6-1/2 in. OD Stainless Steel Piping, 4- WKM CF8M Butterfly Valves, 2- VELAN Size 6-150 Stainless Steel Valves, 8-1/2in. Stainless Steel Ball Valves. With 2- GOULDS CENTRIFUGAL CONDENSATE PUMPS: iFrame, Condens…
325
7.5 mm GPY Nominal Capacity, 7 ft. Top to Bottom Constant Diameter x 88 ft. 8 in. T Seam-to-Seam, 105 ft. 6 in. (approx.) OAH, Valve Type Trays, 15 in. Tray Spacing, Single Pass, 25,965 gal. Capacity. 59- Trays, i.e. 20 in Bottom, 20 in Mid and 19 in Top …
326
Consisting of but not necessarily limited to: Vessel, vertical, 5 ft. dia. x 25 ft. tall (est.) fully Insulated, having Aluminum Exterior Metal covering, the Mid 75% of the Vessel with Full Blanket Insulation Covering Top and Bottom Portions, Top and Bott…
327
API Standard 650, Appendix S, J, M, F 7 V, 11th Edition, 15,865 gal. nominal capacity, 13 ft. 0 in. dia. x 16 ft. .03125 in. Co. No. TK-0501.
328
Each Independently powered by a BALDOR 30 hp Electric Motor, Co. No. P-0511A and P-0511B.
329
Consisting of but not necessarily limited to: 8 in. and 4 in. dia. (est.) Stainless Steel Piping having 2- 8 in. Butterfly Valves and 2- 8 in. Check Valves, 2- 4 in. Butterfly Valves, 2- Pressure Gauges and Related.
330
Each Independently powered by BALDOR 7.5 hp Electric Motors, Co. No. P-0506A and P-0506B.
331
2-1/2 in. Piping Fully Insulated with Aluminum Metal Exterior Jacket. 2- JOHN CRANE LEMCO Accumulator, 2- Pressure Gauges.
332
Each individually powered by BALDOR 75 hp Electric Motors, Co. No. P-0508A and P-0508B.
333
Having 2-1/2 in. dia. Piping. Insulated with Aluminum Metal Exterior Jackets, 2- JOHN CRANE LEMCO Accumulator, 2- Pressure Gauges.
334
Each Individually Powered by BALDOR 10 hp Electric Motor, Co. No. P-0512A and P-0512B.
335
3 in. and 1 in. Stainless Steel Piping Valves, Insulated with Aluminum Metal Exterior Jacket.
336
Each individually powered by BALDOR 7.5 hp Electric Motors, Co. No. P-0513A and P-0513B.
337
Having 6 in. dia. Pipe with Valves and Pressure Gauges, Insulated with Blankets and some Aluminum Metal Exterior Jackets.
338
With Manifold Piping, Valves-Manually and Remotely Controlled and Power Actuated, All Piping Fully Insulated with All-Metal Exterior Jacket, Unitized and Mounted on a 8 ft. wide x 20 ft. long (approx.) I-Beam Skid having Full Bar Grating Deck, Co. No. E-0…
339
2844 gal. capacity, 5 ft. 6 in. dia. x 16 ft. high (est.), Skirted, Carbon Steel, Material of Construction, the Upper 10 ft. (est.) is Fully Insulated with Aluminum Exterior Jacket, Co. No. D-0505A .
340
2844 gal. capacity, 5 ft. 6 in. dia. x 16 ft. high (est.), Skirted, Carbon Steel, Material of Construction, the Upper 10 ft. (est.) is Fully Insulated with Aluminum Exterior Jacket, Co. No. D-0505B.
341
Consisting of but not necessarily limited to: 54 ft. 1-3/4 in. tall x 6 ft. 8 in. dia., 14-344-1-5, SA 516-70N, J74485, 14026 A30, 38A, 331C231. TA TA, CMC, 14026; 386-2-1/2 in. dia. x 140 min. Wall Tubes, SA213T22, Material of Construction.
342
Consisting of but not necessarily limited to: Stainless Steel, 19 in. ID (approx.) having 3- 90 deg. Ells, 1- 4 in. Stainless Steel Gate Valve, 1- I in. Outlet Instrumentation Leads, Fully Insulated with Aluminum Metal Exterior Jacket; 1- Stainless Steel …
343
Having 4- Dura Loop Stainless Steel Hose Hangers with 4- Hoses; 1- Steam, Air, Nitrogen and Water Hose.
344
5 ft. 6 in. dia. x 16 ft. high (est.),Skirted, Carbon Steel, Material of Construction, the Upper 10 ft. (est.) is Fully Insulated with Aluminum Exterior Jacket, Co. No. ETHF-140-1274 and ETHF-140-1275; 3.33 MM BTU/Hr., Shell is 304L Stainless Steel, Tubes…
345
800 gal. capacity, Co. No. D-0513, 4 ft. dia. x 8 ft. high, 304 Stainless Steel, Material of Construction; Fully Insulated with Aluminum Metal Exterior Jacket.
346
4 ft. dia. x 15 ft. long (est.) Fully Insulated with Aluminum Metal Exterior Jacket, Co. No. E-0506 with PRO MAG 2 ft. Sight Gauge, Stainless Steel, with Piping and Valve manifold having 2- FISHER Valves Each with Actuators, 2 in., 4 in. and 6 in. dia. (e…
348
6 in. OD (approx.) Pipe with valves, Fully Insulated with Aluminum Exterior Jacket, Co. No. 140-1017, 140-1010 and 140-1245.
350
Consisting of but not necessarily limited to: 2 in. to 1/2 in. Stainless Steel Piping and Valves, Stainless Steel Strainer Trap, Fully Insulated with Aluminum Metal Exterior Jacket. Co. No. 140-1010, 140-1289, 140-1254, 140-1286, 140-1202, 140-1283, et al…
352
Consisting of but not necessarily limited to: 2- 6 in. Check Valves, 4- 6 in. Butterfly Valves, 2- ASHCROFT Gauges, Co. No. 290-1020, 290-1023, 290-1022.
353
243 gal, capacity, Stainless Steel, Fully Blanketed Insulation. Co. No. D-0510.
354
4 in. OD (approx.) having 2- 4 in. Gate Valves and 2- 3/4 in. Valves, 1- FISHER Valve and Actuator, Fully Insulated with Blanket and Aluminum Metal Exterior Jacket, Co. No. FV-05215. ROSEMONT HDMT.
355
Stainless Steel, Co. No. P-0504, powered by WEG 7.5 hp Electric Motor; SCHMIDT Plate Heat Exchanger; Surge Tank with Piping Manifold; SURESIGHT, Stainless Steel Sight Gauge, Co. No. D-0504.
356
50 gal. capacity, 18 in. dia. x 4 ft. tall, Seam to Seam, Stainless Steel, Vertical, with FISHER Valve and Actuator, Piping Manifold with Valves and ROSEMONT Digital Read-Out, Co. No. D-0508. 2- FISHER Valves with Actuator having Valve Top, Co. No. HV-050…
357
Shell and Tube, Fully Insulated with Aluminum Metal Exterior Jacket, Co. No. E-0505; with Piping Manifold, having FISHER Valve and Actuator, MICRO-MOTION Digital Read-Out, Fully Insulated.
359
Stainless Steel, Co. No. E-0507, Fully Insulated with Aluminum Metal Exterior Jacket.
360
Stainless Steel, Fully Insulated Aluminum Metal Exterior Jacket, Co. No. E-0516, With Piping and valve manifold having Flow Serve Valve and Actuator.
361
Consisting of but not necessarily limited to: 2- FISHER Valves and Actuators, 1- 4 in. Stainless Steel Gate Valve and 1- 4 in. Butterfly Valve, Insulated with Aluminum Metal Exterior Jacket, Co. No. FV-05270, 1- ROSEMONT Digital Read-Out, Micro-Motion HDM…
363
4 in. (approx.) Stainless Steel, having 2- FISHER Valves and Actuators, GROTH Positive Pressure Relief Valve.
364
Galvanized Steel, Material of Construction, Aluminum Louvers mounted on Top, powered with 3- Electric Motors, Co. No. E-0513 A, B, and C.
365
Co. No. S-0508, 85 gal. capacity, 304 L Stainless Steel, Material of Construction, with Piping and Vale Manifold; ORION INSTRUMENTS 2 ft. 9 in. Stainless Steel Sight Gauge.
366
Consisting of but not necessarily limited to: 3- WM POWELL Rising Stem Gate Valves, 2- 16 in. dia. (approx.) and 1- 10 in. dia. (approx.), 1- FISHER 10 in. dia. (approx.), with Actuator having Full Insulation with Blankets and Aluminum Metal Exterior Jack…
367
228 gpm, Each Independently powered by a TOSHIBA 250 hp Electric Motor, Co. No. P-0812A and P-0812B.
368
Consisting of but not necessarily limited to: 6- 6 in. Rising Stem Valves, 2- ASHCROFT Gauges, 2- ROSEMONT Digital Readout Gauges.
369
Plastic, having 'Roll-Top' Side and Double Hinged Doors at the Bottom; 1- Marked 1700, 1- Marked 1820, and 1- Marked Caustic 22310.
370
API Standard 650, 11th Edition Appendix, S, J, F and V, 15,639 gal. nominal capacity 11 ft. dia. x 22 ft. high, Stainless Steel, Co. No. TK-0312 with ORION INSTRUMENTATION 20 ft. Sight Gauge.
371
API Standard 650, 11th Edition Appendix, S, J, F and V, 15,639 gal. nominal capacity 11 ft. dia. x 22 ft. high, Stainless Steel, Co. No. TK-0312 with ORION INSTRUMENTATION 20 ft. Sight Gauge.
372
Fiberglass, 7,000 gal. nominal capacity, Co. No. D-0311, With ORION INSTRUMENTATION 10 ft. Sight Gauge, Stainless Steel.
373
Co. No. P-0305, Powered by TECO WESTINGHOUSE Max-E2/284 2 hp Electric Motor with JOHN CRANE LEMCO Accumulator, Stainless Steel, 3 in. and 4-1/2 in. Stainless Steel Piping, 3- Stainless Steel Valves (2- Butterfly and 1- Check).
374
Consisting of but not necessarily limited to: P-0311, powered by BALDOR .5 hp Electric Motor, Piping and Instrumentation Manifold; 3- ASHCROST Pressure Gauges, 4- 2 in.; And 11- 1/2 in. Stainless Steel Valves; 2- FISHER Valves with Actuators and FIELDVIEW…
375
Fiberglass, 7,000 gal. nominal capacity, Co. No. D-0304A2, With ORION INSTRUMENTATION 10 ft. Sight Gauge, Stainless Steel.
376
Powered by TECO WESTINGHOUSE 2- hp Electric Motor with JOHN CRANE LEMCO Actuator with 4 in. Stainless Steel Piping Manifold, 3- Valves (2- Butterfly, 1- Check) Co. No. P-0300.
377
Consisting of but not necessarily limited to: Co. No. P-0303, powered by BALDOR .5 hp Electric Motor, Piping and Instrumentation Valve Manifold; 3- ASHCROST Pressure Gauges, 4- 2 in. And 11- 1/2 in. Stainless Steel Valves; 2- FISHER Valves with Actuators …
378
Fiberglass, 7,000 gal. nominal capacity, Co. No. D-0300A1, With ORION INSTRUMENTATION 10 ft. Sight Gauge, Stainless Steel, having a Free-Standing, 4 ft. wide x 12 ft. long (est.) Top Mounted Work Platform with Bar Grating Decking, and Ladder, Both with OS…
379
Powered by TECO WESTINGHOUSE 2- hp Electric Motor with JOHN CRANE LEMCO Actuator, Co. No. P-0307.
381
Consisting of but not necessarily limited to: Co. No. P-0321, powered by BALDOR .5 hp Electric Motor, Piping and Instrumentation Manifold; 3- ASHCROFT Pressure Gauges, 4- 2 in. And 11- 1/2 in. Stainless Steel Valves; 2- FISHER Valves with Actuators and FI…
382
Fiberglass, 7,000 gal. nominal capacity, Co. No. D-0305, With ORION INSTRUMENTATION 10 ft. Sight Gauge, Stainless Steel.
383
Powered by TECO WESTINGHOUSE 2- hp Electric Motor with JOHN CRANE LEMCO Actuator with 4 in. Stainless Steel Piping Manifold, 3- Valves (2- Butterfly, 1- Check) Co. No. P-0310.
384
Consisting of but not necessarily limited to: Co. No. P-0321, powered by BALDOR .5 hp Electric Motor, Piping and Valve Instrumentation Manifold;3- ASHCROST Pressure Gauges, 4- 2 in. And 11- 1/2 in. Stainless Steel Valves; 2- FISHER Valves with Actuators a…
385
Stainless Steel, ASME Section VIII, Division 1, 2007 Edition, AS Guide, Un-Stamped, Skirted, with ORION INSTRUMENTATION 14 ft. Sight Gauge, Stainless Steel, Co. No. TK-0306.
386
Consisting of but not necessarily limited to: 2- 4-1/2 in Stainless Steel, 2- 3 in. Stainless Steel, and 1 4 in. Stainless Steel PVC Lines, 1-3 in. Line having FISHER Valve and Actuator; Lines are dedicated to Aqueous Ammonia, Ammonia Vent, Caustic Soda, …
387
Consisting of but not necessarily limited to: Co. No. P-0306, powered by BALDOR .5 hp Electric Motor, Piping and Valve Instrumentation Manifold; 3- ASHCROST Pressure Gauges, 4- 2 in. And 11- 1/2 in. Stainless Steel Valves; 2- FISHER Valves with Actuators …
389
Consisting of but not necessarily limited to: 5- Pieces Stainless Steel, 10 in. dia. having Various Lengths, Shapes and Designs; 12- Pieces (approx.) Stainless Steel, 4 in. dia. and Smaller, having Various Lengths, Shapes and Designs; 4- Pieces of Carbon …
390
23,828 gal. nominal capacity, 13 ft. 0 in. dia. x 24 ft. 0.25 in. TTAPI Standard 650 Appendix J, F, & V, 11th Edition, Revision E, All Shell Covers are 0.250 in., SA-36 Carbon Steel, Co. No. TK-0601A.
391
5 in. (approx.) having 23- (approx.) Valves consisting of but not necessarily limited to: 5 FISHER Valves with Actuators, 2- POWELL 6 in. Flanged Check Valves, 12- (approx.) 3/4 in. Valves, Co. No. ETHC-205-1026.
392
23,828 gal. nominal capacity, 13 ft. 0 in. dia. x 24 ft. 0.25 in. TT; API Standard 650 Appendix J, F, & V, 11th Edition, Revision E, All Shell Covers are 0.250 in., SA-36 Carbon Steel, Co. No. TK-0601B.
393
23,828 gal. nominal capacity, API Standard 650 Appendix J, F, & V, 11th Edition, Revision E, All Shell Covers are 0.250 in., SA-36 Carbon Steel, Co. No. TK-0602.
394
Consisting of but not necessarily limited to: FISHER Valve and Actuator, 5- 1-3/4 in. and 1 in. Valves, WILDEN (or similar) 1 in. (est.) Air Operated Diaphragm Pump, PVC, Material of Construction.
395
23,828 gal. nominal capacity, API Standard 650 Appendix J, F, & V, 11th Edition, Revision E, 13 ft. 0 in. dia. x 24 ft. 0 .250 in. TT; All Shell Covers are 0.250 in., SA-36 Carbon Steel, Co. No. TK-0604.
397
106,500 gal. nominal capacity, API Standard 650, 11th Edition, Revision 2, 24 ft. dia. x 32 ft. tall, Co. No. TK-0603.
398
Consisting of but not necessarily limited to: FISHER Valve and Actuator, 2-3 in. Butterfly Valves, Stainless Steel Ball Valve, 1- 6 in. Butterfly Valve.
399
Consisting of but not necessarily limited to: GOULD'S i-Frame Centrifugal Pump Independently powered by TECO WESTINGHOUSE Max-E2/841, 5 hp Electric Motor, Each with JOHN CRANE LEMCO Accumulator, Co. No. P-0601.
400
Consisting of but not necessarily limited to: GOULD'S i-Frame Centrifugal Pump, Independently powered by TECO WESTINGHOUSE Max-E2/841, 5 hp Electric Motor, Each with JOHN CRANE LEMCO Accumulator, Co. No. P-0602.
401
Consisting of but not necessarily limited to: GOULD'S i-Frame Centrifugal Pump Independently powered by TECO WESTINGHOUSE Max-E2/841, 5 hp Electric Motor, Each with JOHN CRANE LEMCO Accumulator, Co. No. P-0604.
402
Consisting of but not necessarily limited to: 5 in., 4 in., 2 in., and 1 in., 25- (approx.) Valves, 3- Pressure Gauges, MIRCO-MOTION Coriolis Mass Flow Meter, FISHER, Valve having Actuator; CROSBY Style 3L4 JVS-E-15-J, Pressure Relief Valve, Co. No. PSV-0…
403
Consisting of but not necessarily limited to: 2- GARDENER DENVER EMCO WHEATON 4 in. Chiksan Joint Load Out Arms, Counter Balanced, Each having Flexible Hose with Vapor Recovery End Fittings, 6- SMITH METER INC. Metering Unit, Filter Trap and Valves, havin…
404
23 ft. dia. x 20 ft. OAH, Co. No. Z-0204; with AKRON ELECTRIC INC Control Box, Co. No. CE-0101. With CALLIDUS TECHNOLOGIES COMBUSTION PILOT PANEL: Stainless Steel, with ALLEN BRADLEY PanelView Plus 400 HDMI, and CYCLOPS Z-Purge Indicator, with Piping Mani…
405
i-Frame, powered by TECO WESTINGHOUSE Max-E2, 15 hp Electric Motor having JOHN CRANE Service Accumulator, 1-8 in. Check Valve and 1- POWELL WCB 4 in. Check Valve; Co. No. P-0603.
406
16,000 gpm, 100 deg. F In / 87 deg. F Out, 13 ft. 6 in. wide x 55 ft. long x 25 ft. tall (approx.) OAD, Galvanized Steel, Material of Construction, Co. No. C0720A&B.
407
16,000 gpm, 100 deg. F In / 87 deg. F Out, 13 ft. 6 in. wide x 55 ft. long x 25 ft. tall (approx.) OAD, Galvanized Steel, Material of Construction, Co. No. C0720E&F.
408
16,000 gpm, 100 deg. F In / 87 deg. F Out, 13 ft. 6 in. wide x 55 ft. long x 25 ft. tall (approx.) OAD, Galvanized Steel, Material of Construction, Co. No. C0720C&D.
409
16,000 gpm, 100 deg. F I / 87 deg. F Out, 13 ft. 6 in. wide x 55 ft. long x 25 ft. tall (approx.) OAD, Galvanized Steel, Material of Construction, Co. No. C0720G&H.
410
iFrame,12 in. x 14 in. -22 in., AI / 316 Stainless Steel, Material of Construction, powered by TECO WESTINGHOUSE Max - E2/841 450 hp Electric Motor, Co. No. P-0725A.
411
iFrame,12 in. x 14 in. -22 in., AI / 316 Stainless Steel, Material of Construction, powered by TECO WESTINGHOUSE Max - E2/841 450 hp Electric Motor, Co. No. P-0725B.
412
iFrame,12 in. x 14 in. -22 in., AI / 316 Stainless Steel, Material of Construction, powered by TECO WESTINGHOUSE Max - E2/841 450 hp Electric Motor, Co. No. P-0725C.
413
Consisting of but not necessarily limited to: 29 in., 24 in., and 13 in. dia. Piping with 20 + (approx.) Manually Operated Butterfly Valves and Related.
415
i-Frame, powered by TECO WESTINGHOUSE Max-E2, 15 hp Electric Motor, Co. No. P-0802.
416
Consisting of but not necessarily limited to: KECKLY 8 in. Stainless Steel Check Valve, 2- FISHER, Type 150 Series B, 6 in. Valves with Controllers.
417
4- FISHER Valves, Each Having Actuators, 3- 4-1/2 in., 1- 2-1/2 in., 3- 4-1/2 in Gate Valves, 3- ROSEMONT Flow Meter, Co. No. 220-1051; with 3- Stainless Steel, Electrical, Weatherproof Control Panels, Co. No. GW-210-1004 and Co. No. WW-210-1081.
418
Plastic, having 'Roll-Top' Side and Double Hinged Doors at the Bottom, 1- RUBBERMAID 6 ft. tall x 2 ft. deep x 3 ft. wide, Storage Shed Having Double Hinged Front Doors; 1- Marked Acid, 1- Marked 3DT184, and 1- Marked Chlorine.
419
Consisting of but not necessarily limited to: 8 in. dia. Stainless Steel Piping with 5- Valves: 1- FISHER, all are Remotely Power Actuated; ENARDO Flame Arrester, Stainless Steel; 3 in. Carbon Steel Piping having 6 Valves: 1- FISHER and 2- Remotely Power …
420
Rated Output -6360 Kw, Speed (Turbine/Generator) 7490/1800 rpm, 600 psig Inlet Steam Pressure, 653 deg. F Inlet Steam Pressure. Co. No. ST-0801. (NOTE: Owner states this Unit has incurred less than 1,000 Hours Run Time; Has been continuously Maintained ev…
421
Normal Power Rating 6360 Kw, Input Speed 7490 rpm, Output Speed 1800 rpm, Co. No. ST-0802.
422
Frame 21320-40, Type SAB, 6350 KW, 7950KVA, 13,800 volts, 1800 rpm, Continuous Duty; with Brushless Exciter Frame BE-13-3, Type FRBA, 25 Kw Output, 180 CD volts; Permanent Magnet Alternator, Frame PM-13-3, s/n 1010075 01, 24 KVA, Co. No. E-0812; 2- Pumps …
423
Consisting of but not necessarily limited to: 4- Oil Pumps, Each independently powered by WEG Electric Motors, Co. No. P-0801A, P-0801B, P-0802A, P-0802B; Reservoir Tank to hold ISO VG46 Turbine Oil; 2- Filters, Stainless Steel, Co. No. F0808A and F-0808B…
424
5 ft. ID x 6 ft. tall (Top), 7 ft. dia. x 12 ft. tall [Bottom], Carbon Steel Certified by PRO ENERGY, Co. No. D-0811; With Sight Gauge and Valve Manifold consisting of but not limited to: 3- FISHER Valves with Actuators, 3- (approx.) 2 in. dia. Stainless …
425
Having Free-Standing Control Pedestal with 3- Regulators, Each with 2- Pressure Gauges, 3- Carrier Gas-In, Combustion-Gas-In and Sample Gas-In.
426
Consisting of but not necessarily limited to: 2- FISHER 8 in. Valves, Each having Actuators, Co. No. FV-04015; 7- (approx.) 8 in. Stainless Steel Rising Stem Valves, 2- 6 in. Stainless Steel Rising Stem Valves, 3- Stainless Steel Pipe Line, 1- Carbon Stee…
427
API Standard 650, Appendix E & F, 64,800 gal. nominal capacity, 22 ft. dia. x 24 ft. tall, Co. No. TK-0801.
428
iFrame, Each Independently powered by TECO WESTINGHOUSE, Max E2/841, 50 hp Electric Motor, P-0801A and P-0801B.
429
Consisting of but not necessarily limited to: 8 in. and 6 in. dia. Pipe, 2- KECKLE 8 in. Check Valves, 3- POWELL 6 in. Check Valves, 2- FISHER Valves with Actuators, 5- Butterfly Valves, 2- ASHCOFT Pressure Gauges, and 2- ROSEMONT Magnetic Flow Tubes, 2- …
430
725 psi @ 600 deg. F, 700- Tubes; 55,250 lbs./hr. max. Steaming capacity, 5343 sq. ft. Heating Surface, COEN TODD With Vari-Flame Burner Filter Control Panels, P.O. No. 91112120, s/n 1103-239, (Mfg. 2011), Stainless Steel having 1- each ALLEN BRADLEY Pane…
431
High Pressure Steam to Distribution Header. Consisting of but not necessarily limited to: 8 in. to 1/2 in. dia. Piping, 3- FISHER Valves Each with Actuators, 3- ROSEMONT Digital Readout Meters, 26 + Valves and Gauges (approx.).
432
1170 cu. ft., Trace Continuous Emissions Monitoring System mounted in MIMS Rack with DURAG D-R290AW, ALLEN BRADLEY PANEL VIEW PLUS 600 4-CAI 600 Series Modules for NOX/O2, CO Outlet, SO2 Inlet and Function not Stated; 1- CYBER-POWER Module, having Baird A…
433
Consisting of but not necessarily limited to: 12 in. dia. x 10 ft. along (approx.) U-Trough Single Auger Conveyor with TYCO Stainless Steel 8 in. Knife Gate, powered by Electric Motor driving through a Reduction Gear box, with Heat Trace Cable, 2- Industr…
434
10 ft. dia. x 30 ft. tall (est.), Conical Hopper Bottom, Skirted, Co. No. T-0805; with Equipment Room consisting of but not necessarily limited to: Feed Hopper, Co. No. Z-0805; Fan Powered by Electric Motor, Co. No. C-0805, Rotary Air Lock; Silo mounted o…
435
Consisting of but not necessarily limited to: 80 ft. tall (est.) having a 60 in. dia. x 35 ft. tall (est.) Base Section, a 42 in. dia. x 35 ft. tall (est.) Mid Section and a 16 in. dia. x 10 ft. tall (est.) Top Section; 360 Maintenance Platform mounted 2/…
436
Consisting of but not necessarily limited to: 10 in. dia. Piping; 2- 10 in. Gate Valves; 1- FISHER 4 in. Valve and Actuator, 10 - (approx.) 2 in. and 1 in. Valves; 3- ROSEMONT Instruments; Piping is fully Insulated with all Metal Exterior Jacket.
438
Consisting of but not necessarily limited to: Skid 1: CTP and Pumps, Production Process, Co. No. U-0301, and Second Growth Process, Co. No. U-0340, having 4- Stainless Steel Centrifugal Pumps, 3- powered by BALDOR 60 hp Electric Motor and 1- powered by BA…
439
Consisting of but not necessarily limited to: 8- Pieces total: 2- 8 in. dia. With ENDRESS & HAUSER with Power Valve Actuator with Transmitter, 2- 6 in. dia. With ENDRESS & HAUSER Power Valve Actuator with Transmitter; 1- 8 in. Stainless Steel Fabricated T…
440
Consisting of but not necessarily limited to: Skid is Stainless Steel consisting of 2- Stainless Steel Centrifugal Pumps, Each including and powered by BALDOR Super E 40 hp Electric Motor necessary Plumbing, Valves and Controls with Remote Control Panel: …
455
Consisting of but not necessarily limited to: 4- Barrels, 3- 55 gal. capacity, (approx.), 3- Bags of Absorbent Rolls/ Snakes; 1- Plastic Tub with Contents.
456
Each Pallet contains 1 NOVA Control Module, 1- for each Train, both Model 976AS, Train 1 - s/n 9326; and Train 2 - s/n 9373; on 2- Pallets.
459
Consisting of but not necessarily limited to: 4- Sections, Each containing 3- Lockers, Steel 7 ft. tall; Lot - Folding Table and Chairs 4- LIFE-TIME, 6 ft. long, 6 - Chairs, 4- Steel Folding.
461
1- Free Standing Gas Control Panel; 2- AIR GAS Gas Control Panel; 1- PEPPERL & FUCHS.
464
Portable having 10 gal. (est.) Capacity Stainless Steel Keg Base.
466
Consisting of but not necessarily limited to: 15- (approx.) RUBBERMAID Brute Trash Cans, Barrels, and Buckets, 1- IGLOO Water Can, 4 in. dia. Hose, and Related.
473
Consisting of but not necessarily limited to: 4- GLOBAL Yellow Plastic Floor Bollards, 4- RUBBERMAID Yellow Plastic 'Caution' Pyramids, 12- Yellow Plastic Spill Kits, Trash Can Lids/ Tops, 1- Bucket of Clear-Glide.
475
Consisting of but not necessarily limited to: 2- Boxes of CHEVRON Grease in Tubes; 5- Grease Guns, Manual; 7- Boxes and 4- Rolls (approx.) of Packing.
476
New in the Box Switchgear Breaker, Style Number 3777A92G02, 7- (approx.) Butterfly Valves, Each with Power Actuation, 4- Boxes, (NOTE: Contents Unknown).
477
Consisting of but not necessarily limited to: 1- CRI 15-9-20 hp, 1- CRN15-3-3P, powered by 7.53 hp Electric Motor; BALDOR RELIANCE, 10 hp Electric Motor (New/ Unused); MARATHON 20 HP ELECTRIC Motor (New/Unused); FRISTRAM Stainless Steel Pump powered by BA…
478
Consisting of but not necessarily limited to: 2- DAYTON 1- hp Electric Motor, (New/Unused); BALDOR 1 hp Electric Motor (New/Unused); CRI5-10-3P powered by 3 hp Electric Motor (New/Unused); 2- Pumps powered by BALDOR RELIANCE .5 HP Electric Motor; FRISTRAM…
481
Consisting of but not necessarily limited to: 5- BALDOR-RELIANCE .5 hp (New/Unused); .33 hp (New/Unused); 1- LEESON 1 hp. Electric Motor1- SEW Eurodrive (New/Unused).
482
Consisting of but not necessarily limited to: 1- TECO WESTINGHOUSE 10 hp Electric Motor, (Used); 1- MARATHON 10 hp Electric Motor (New/Unused); 1- TOSHIBA 10 hp Electric Motor, (Used); 1- Electric Motor 1 hp (est.) (Used).
483
Consisting of but not necessarily limited to: iFrame, 1- powered by TECO WESTINGHOUSE 2 hp Electric Motor, and 1- powered by TECO WESTINGHOUSE 5 hp Electric Motor.
484
Consisting of but not necessarily limited to: (NOTE: Pump Only, Power not attached; on 3- Pallets and in 1- Crate.
485
1- Stainless Steel Centrifugal Pump powered by BALDOR RELIANCE 10 hp Electric Motor, Co. No. P-0340H.
487
1000 lbs. capacity 19 in. Load Center, 104 in. lift, (New/Unused).
488
30 in. dia. x 10 in. wide (approx.); 300 Flex Connection Stock Fan Expansion Joint, Co. No. 95011523.
489
Consisting of but not necessarily limited to: iFrame Pump (Note: No Power), (NOTE: No Motor Housing, No Impeller), 1- GRISWOLD Size S/3X 1.5-6/SOID/S0606/SE/SNB, s/n 5375 (New/Unused); and 1- Metal Expansion Joint Assembly with Nuts Gasket, Co. No. 950149…
491
Consisting of but not necessarily limited to: 9- (approx.) Cardboard boxes containing Miscellaneous Parts; electrical Control Panel, Metal, 3- 1/2 in. Poly/Nylon Diaphragm Pumps, 9- Rolls of Flexible Tubing, 1- Spool of PARKER Tubing, and 3M Fire Pillow.
494
125 hp, 3600 rpm, 3 ph, 60 Hz, 460 V, Crate #GT1048, KL617, 450063598-107-63; Shelf Location- AF-0401.
495
Stainless Steel, powered by Electric Motor, 3- Stainless Steel Centrifugal Pumps; 1- RIO Stainless Steel Pump, powered by Electric Motor; Plastic PNC Reverse Osmosis Rectifier Pump powered by 1/2 hp Electric Motor; Shelf Location - AF-0402.
496
Consisting of but not necessarily limited to: In Wood Crate and Panel from AMEC in Wood Crate; Shelf Location - AF-03-02, AF-0301; 1- Pallet with 2- GOULDS Pumps Powered by TECO WESTINGHOUSE 2- hp Electric Motors; on 2- Pallets.
497
Consisting of but not necessarily limited to: 4- BALDOR-RELIANCE .5 hp Electric Motors (New/Unused), Co. No. 95011205 and Co. No. 95012063; Shelf Location AF-03-02, AF-03-01, on 2- Pallets.
498
Consisting of but not necessarily limited to: TOSHIBA 250 hp Model B250GFLG38SHJL, s/n 110808627, 3580 rpm, 60 Hz, 460 V; TECO WESTINGHOUSE 75 hp Electric Motor; BALDOR - RELIANCE 3 hp Electric Motor; Shelf Location AF-0201.
499
Consisting of but not necessarily limited to: 3- WEG 3 to 10 hp (est.) (New/Unused), BALDOR - RELIANCE Electric Motor, (New/Unused); Shelf Location AF-0202.
500
2-15 HP, 1800 RPM, 254T, 3, EPFC1-15/10 hp Co. No. 95012235, Co. No. 95014440 and 1- not ID'd; Shelf Location AF-01-01, AF -01-02.
502
Consisting of but not necessarily limited to:1- Box PANDUIT Fittings and Pressure Regulators; Bags of Assorted Zip Ties, 1/2 in. Brass Ball Valves, 4- Boxes (approx.) Cush-A-Clamps, CRC Lectra Clean.
503
Crouse-Hines & Topaz Electrical, Consisting of but not necessarily limited to: POLARIS Tops, Condulets, Gaskets, and Covers, U- Bolts, Extra Hardware, Conduit Fittings, PANDUIT Fittings and Related Parts.
505
Consisting of but not necessarily limited to: Wire Nuts and Compression Splices, Multicolored Tape and Related.
506
Consisting of but not necessarily limited to: 1-20 Bin and 1- 40 Bin Parts Cabinet containing Various Electrical Conduit and Related Fittings.
507
Powered by BALDOR RELIANCE Electric Motor mounted on 90 gal. (est.) Vertical Air Receiver Tank.
509
Consisting of but not necessarily limited to: 42 in. x 8 ft. Steel Workbench having 2- Vises, 1- 6 in. and 1- WILTON; Back Board with Electrical Modules; 2- Surveillance Camera Modules with Mounting Brackets; 5- Boxes of Related Parts.
510
Small Wire, MASTERFLEX PHILLIPS and Others is Support ROSEMONT Instrumentation FISHER Control Boxes having Flexible Stainless Steel Wiring; Work Bench, Steel, 32 in. deep x 60 in. (est.) long having Heaving Duty Vise. With WORK BENCH: 40 in. x 6 ft. (Appr…
511
3- Sections, 2- 15 ft. high x 42 in. x 8 ft. long and 1- 10 ft. high x 42 in. deep x 8 ft. long.
512
Consisting of but not necessarily limited to: Box of Phillips; 20 + Rolls of Small Electrical Wire; 4- (approx.) Boxes of Multi-Conductor Instrumentation Wire; 45 + (est.) ROSEMONT HDMI Units, and Related Items; Fisher Valves with Actuators, Pressure Regu…
513
Out-Door Site Phone having Metal Casing; 5- GAI -Tronics Model 263 Isolation Barrier Units and Related; on Pallet.
517
Consisting of but not necessarily limited to: 5- COLEMAN Queen Grand Elite Supportrest, 7- (approx.) Plush Pillows, 4- HUSKY 20 ft. x 100 ft. 4- mil Clear Polyethylene Sheeting, COLEMAN Quick Pump; on Pallet.
518
Consisting of but not necessarily limited to: 4- Boxes of CLEAR CHOICE Can Liners; 1- Box of Intertape Tape, 1- Pack Gloves; KASHIN Trash Pump powered by Gasoline Engine; 1- Bundle of ROCK RIVER 20 ft. x 30 ft. Blue Tarp and Related; 4 ft.x 100 ft. Constr…
521
2 ft. wide x 45 in. long Deck 10 in. high Side, Tongue Steer, Wire Mesh Bottom and 4- Drop Down Sides, Pneumatic Tires.
522
2 ft. wide x 45 in. long Deck 10 in. high Side, Tongue Steer, Wire Mesh Bottom and 4- Drop Down Sides, Pneumatic Tires.
523
2 ft. wide x 45 in. long Deck 10 in. high Side, Tongue Steer, Wire Mesh Bottom and 4- Drop Down Sides, Pneumatic Tires.
524
2 ft. wide x 45 in. long Deck 10 in. high Side, Tongue Steer, Wire Mesh Bottom and 4- Drop Down Sides, Pneumatic Tires.
536
Having Model 767 Hand Pump; GREENLEE Splitter Set for 2 in. Conduit having Model 767 Hand Pump. With PUNCH-LOK LOCKING TOOL P-1000.
537
Consisting of but not necessarily limited to: CHICAGO PNEUMATIC and INGERSOLL RAND Air Impact Wrenches, GREENLEE Splitter Set for 2 in. Conduit having Model 767 Hand Pump. And MILWAUKEE Power Tools.
538
Consisting of but not necessarily limited to: Drills, Grinders and Reciprocating Saw; 120 Volt, AC Powered.
543
8 ft. high x 10 ft. long (approx.) with Tool Contents of Combination Wrenches 2-3/8 in. to 1-3/8 in.; Hammer Wrenches; Hex Nut Sockets 2-1/2 in (est.) to 1-1/8 in.; 7- Chain/Cable Clevises; RIDGID Pipe Wrenches Carpenter Levels; Bolt Cutters; Brooms and R…
546
Containing ASAHI Specialized Box End, Combination End, Hammer Wrenches and Similar.
549
Consisting of but not necessarily limited to: 1- 3-ton, 1- 1-1/2 ton, 2- 1-ton and 1- 3/4 ton. With LOT CHAIN AND TWINE: Consisting of but not necessarily limited to: 2- 5 gal. Pails having Link Chain, 1- 5 gal. Pail of GRAYBAR 6500 ft. of Poly Line. (NOT…
554
100 to 600 ft. lbs. Rating in Storage Case. (NOTE: The Square Drive Head is Broken.)
555
1- 42 in. (approx.) long, 1- 16 in. (approx.) long, having Carrying Storage Case.
556
Consisting of but not necessarily limited to: 7- RIDGID Adjustable Pipe Wrenches having 1- 48 in., 1- 24 in., 2- 36 in., and 3- 14 in.
558
Consisting of but not necessarily limited to: 1 in. Drive Socket Wrench Set having 19- Sockets, Ratchet Wrench, Bar Wrench, Extensions, and Knuckle; All in Storage/Carrying Case; with 2- Deep Throat C-Clamps and 2- Clevises.
559
15- (est.) Slings of Various Sizes Capacities, 8- (approx.) Clevises, Various Sizes, Plate Clamp.
561
Consisting of but not necessarily limited to: Top Cabinet, SPEARHEAD, Model 748-E-25, Adjustable Extension Gasket Cutter, Internal/Extend Snap Ring, Plyers Set and Related Tools; Tap and Die Set, Twist Drills, Air Impact Wrench with 6 in. Extension, 1 in.…
563
Consisting of but not necessarily limited to: FASTENAL 28- (approx.) Carbon Steel, Stainless Steel, Copper and Galvanized Rods, Most are 6 ft. long x 1 in. dia. and smaller, 4- Pieces are 10 ft. long (approx.).
565
Consisting of but not necessarily limited to: 2- Pallets having 20 (approx.) Boxes of FASTENAL Consumables, Bolts Hex Nuts, Pipe Fittings and Related.
567
13- Boxes PLATTCO Dust Cartridges Co. No. 95013038; 4- Boxes PALL CORPORATION Claris PP FLTR CART 1 MIC 40 in.
569
18-1/2 in. tall x 24 in. deep x 48 in. wide, having Double Hinged Front Doors. Cabinet and Doors Fitted with Cantilevered Plastic Parts Bins. (Contents of Yellow Bins Lot 570 are Not Included.)
570
Consisting of but not necessarily limited to: SWAGELOK SS-200, SS-400, SS-600 and SS-810, Tube and Hose Unions, Union Elbows, Plugs, Tees, Ferrule Sets; SS-45S8, SS-43GS6 Ball Valves, Tube Supports and Related. (Contents of Yellow Bins.)
571
Consisting of but not necessarily limited to: 4-5- gal. Buckets with Clamping Fittings, Ball Valves, Valve Actuators, Various length of small dia. Stainless Steel Pipe, 2-1/2 in. dia. (est.) Tee and Related Equipment.
572
(NOTE: States, "Use Before 11/2014"), Co. No. 95014468.
573
Co. No. 95013455 to Co. No. 95013456, Assembled into 1- Piece, Co. No. 95013592; Shelf Location Q-03-04.
574
Consisting of but not necessarily limited to: 2- Boxes of RYAN HERCO FLOW SOLUTIONS No.5909.273 Signet PH/ORP Inline SNSR Electric, 2- Boxes FRISTAM PUMPS Part No. 802600653 758 Single Seal Kit, 1- Co. No. 95014028 Dryer; Shelf Location: Q-03-03.
575
Consisting of but not necessarily limited to: 4- Boxes of NORGREN 124470418 1/8 NPTF 1/4 in. Fittings, 10- Items per Box; 3- Boxes NORGREN 124470428 1/4 NDTF Fittings, 10- Items per Box 124250428, V4NPTF Fittings, 10- Items per Box; Shelf Location Q-03-02…
576
3- Boxes and 2 Bags of Rebuild Gasket Kit and Related consisting of but not necessarily limited to: 2- Boxes of Co. No. 95014349 Rebuild Gasket Kit; 1- Box Co. No. 95014347 Rebuild Gasket Kit; 2- Boxes Co. No. 95014348 / S501-144 containing 4- Roller Bear…
579
Consisting of but not necessarily limited to: 1- Box of Diaphragms, Co. No. 95011856, Co. No. 95012959 and Co. No. 95012977; 1- Box Diaphragms Co. No. 95013003, Co. No. 95012900 and Co. No. 95012911; 1- Box O-Rings, Co. No. 95014199; Shelf Location Q-02-0…
580
Consisting of but not necessarily limited to: ALICAT Part No. MCR-100SLPM-D-X s/n 7153 (New/Unused) (NOTE: Is packed in OEM Shipping Box, Enclosed in Sealed Plastic Cover/Bag/Sack; 1- NUMATICS Air Cylinder Co. No. 95014007 for PLATTCO; 1- Box MCMASTER CAR…
581
Consisting of but not necessarily limited to: 2- Boxes of FISHER PARTS BY EMERSON, Trip Valve Repair, Kit Part No R377X000012; 2- Boxes FISHER PARTS Single Graphite 1/2 in. Item Packing Kit No. RPACKX00112; 2- Boxes #38B5786X052, Standard Relay Assembly R…
582
Consisting of but not necessarily limited to: 1- Box containing PARKER Cylinder Replacement Parts Kits, Part No. from Co. No. 950137760 to Co. No. 95012421; 1- Box containing MILTON ROY, LUB POWER, MORIN ACTUATORS AND OTHERS, Repair Kits, Part No. #950133…
584
Consisting of but not necessarily limited to: 1- Box Wire Rope Lanyard Kits, Part No. Co. No. 95014846 to Co. No. 95014851.
585
Consisting of but not necessarily limited to: 1- Box Repair Kits and 1- Box Thrust Bearing Size 80, Co. No. 95012908; Shelf Location Q-01-04.
586
Consisting of but not necessarily limited to: Repair Kits, Packing Box Rings, Seals Packing, Hex Nuts, Keys, Pins and Gaskets; 1- Box Diaphragm Kits, Gasket Kits, Piston Rings, O-Rings and Others, Co. No. 95011852 to Co. No. 95012879; 1- Box O-Rings, Seal…
587
Consisting of but not necessarily limited to: 1- Box of Gaskets Sets, Shims, Repair Kits, Co. No. 95012872 to Co. No. 95012995; 1- Box of Seat Ring, Repair Kit, Stem, Filter, Diaphragm Assembly, Co. No. 95012930 to Co. No. 95012888; 1- Box of Disk Holder,…
588
Consisting of but not necessarily limited to: 1- Box of Repair Kit, Diaphragm, Seal Ring, Stem Plug, Co. No. 95012912 to Co. No. 95012931; 1- Box of Stem Plug, Repair Kit, Retainer/Bushing Assembly, Seal Bushing, Co. No. 95012910 to Co. No. 95012981; 1- B…
590
Consisting of but not necessarily limited to: 2- Boxes FEDERAL SIGNAL Electra Flash Model 141 ST-024A; 1- Box RHEODYNE; and 2- Boxes Solenoid Assembly for SLIDE GATE CYCLONE , Co. No. 95012121, Co. No. 95012122, Co. No. 95014163, Co. No. 95015067; Shelf L…
591
Consisting of but not necessarily limited to: 2- ECLIPSE Veri-Flame Control/Gas Low Cham, 1- Box ECLIPSE Actuator Mounting Kit 1/2"; 1- Box Eclipse Rod Control, 1- Box ECLIPSE Connector for Linkage, 3- Boxes ECLIPSE 49600-90 UV Scanner/Gas Low Cham, 1- Bo…
592
Charm Fused Terminal Blocks, DI Dry6, DO 24 VDC ISO, AD 4-20 Hart Similar, Co. No. 95012476 to 95011951; Shelf Location P-01-03.
593
Charm Baseplate, Type KFD 2-SR2-EXI.W, Co. No. 95013909 to Co. No. 95015066; Shelf Location P-01-02.
594
Consisting of but not necessarily limited to: 29- Boxes, Turbo SRM, 4- Boxes Hardware, Co. No. 95014177 to Co. No. 95014945; Shelf Location P-01-01.
596
Consisting of but not necessarily limited to: 2- Boxes MASTER FLEX Precision Pump Tubing, 4- Coils FASTENAL #0448186, 1/2 in OD x 100 ft. Black SURETHANE Tubing, Co. No. 95015117; Shelf Location P-0205.
597
Consisting of but not necessarily limited to: Safety Switch Ignition Cable; LCD Screen; Truck Pin; Lock Mini; 4- Pin Connector-Male and Female; 8- Pin Connector-Male and Female, Co. No. 95012120 to Co. No. 95013880; Shelf Location P-0204.
598
Consisting of but not necessarily limited to: Disposable Filter Element, (NOTE: 3- Boxes appear to be Opened/Empty) 4- Boxes SCHNEIDER BMXDD13202K; 7- Boxes EATON DeviceNet; 3- VICTOR Pressure Regulators; 9- Boxes- not Id'd, Co. No. 95014798 to 95013552; …
599
Consisting of but not necessarily limited to: JDM TECHNOLOGIES, BENTLY NSV Extension Cable; 1- HONEYWELL Gas H/G/LP Pressure Switch; 5- HONEYWELL Gas Pressure Switches; 4- FISHER PARTS DVC6200 Mounting Kits, Co. No. 95014389 to Co. No. 95015063; Shelf Loc…
600
Consisting of but not necessarily limited to: 15- Boxes of JDM TECHNOLOGIES, MAC Solenoid Valve, 24 VDC; 2-Rolls Style IG1250 Fiberglass Tape, Co. No. 95015257 to Co. No. 95013924, 95012468; Shelf Location P-02-01.
602
Consisting of but not necessarily limited to: MASTERFLEX (or Similar) Plastic Tubing, Clear and Black; Shelf Location P-03-05.
603
Consisting of but not necessarily limited to: Resistance Repeater, Temperature Transmitter, Port Kits, Mini Regulator, Glass Tube and MAC Valves, Co. No. 95015078 to Co. No. 95014?15; Shelf Location P-03-04.
604
Consisting of but not necessarily limited to: RYAN HERCO SIGNET Integrated System Condenser, Flat ORP, NPT; Sensor Flow 5-4 in. Pipe Signet and Related, Co. No. 95011130 to Co. No. 95015365; Shelf Location P-03-03.
605
Consisting of but not necessarily limited to: RYAN HERCO VLV Ball PVC 2 in.; VLV Check PVC 2 in.; VLV Check PVC 1 in.; GRANGER, Unidentified, Co. No. 95012290 to Co. No. 95011963; Shelf Location P-03-02.
606
Consisting of but not necessarily limited to: ALLEN-BRADLEY Controllogix, 6- Point A/I Module, Input/Output Cards, Discrete, Analog and Related, Co. No. 95013351 to Co. No. 95012328; Shelf Location P-03-01.
608
Consisting of but not necessarily limited to: ALLEN-BRADLEY Compact I/O Power Supply, Flex Ether Net Adapter and Related, Co. No. 95012123 to Co. No. 95013029; Shelf Location O-0305.
609
Consisting of but not necessarily limited to: 16- Point and 8- Point Output, Allen-Bradley Power Supply, Co. No. 95015064 to 95015361; Shelf Location O-03-04.
610
Consisting of but not necessarily limited to: Switches, Battery Assembly, Relays, Mini Circuit Breakers, Circuit Breakers and Related, Co. No. 95014301 to Co. No. 95014966; Shelf Location O-03-03.
611
Consisting of but not necessarily limited to: Supplementation Protector, Circuit Breakers, Red Camp, Push Button Switches, Co. No. 95014963 to 95012319; Shelf Location O-03-02.
612
Consisting of but not necessarily limited to: 8- Channel Current Out-Put Module, proximity Switches, Amber and Green Lamps, Selector Switches, Co. No. 95012001 to Co. No. 95012327; Shelf Location O-0301.
614
Consisting of but not necessarily limited to: ASCO Press Transducer, Circuit Breakers Auxiliary Contact, Co. No. 95013746 to Co. No. 95013581; Shelf Location O-0205.
615
Consisting of but not necessarily limited to: ASCO Red Hot Gasifier Coil, Solenoid and Related, Co. No. 95013875 to 95013889; Shelf Location O-0204.
616
Consisting of but not necessarily limited to: ASCO Red Hot Valves, #T-480737, T-753778, T-916189, T-618958, and T-613566, Co. No. 95014142 to Co. No. 95012311; Shelf Location O-0203.
617
Consisting of but not necessarily limited to: ASCO Red Hot Solenoid Valves, 120 VAC, Switch Temp/Pressure, Copper Direct Probe and Related, Co. No. 95012168 to Co. No. 95013791; Shelf Location O-02-02.
618
Consisting of but not necessarily limited to: ALLEN-BRADLEY Power Flex 40 AC Drive, ALLEN-BRADLEY 6.5 IN. Assembled Terminal Panel View 700, Co. No. 95012057 to Co. No. 95013573; Shelf Location O-02-01.
620
Consisting of but not necessarily limited to: 4001-2LM 4 in. SST Gauges, PRO THERM, and 0-200 and 0-60 Oil Filled, Co. No. 95013010 to Co. No. 95013793; Shelf Location O-01-05.
621
Consisting of but not necessarily limited to: Gauges, some are Oil Filled, Co. No. 95013869 to Co. No. 95015028; Shelf Location O-0104.
622
Consisting of but not necessarily limited to: DWYER, NOSHOK, AND ASHCROFT, Gauges, Co. No. 95011526 to Co. No. 95015045; Shelf Location O-0103.
623
Consisting of but not necessarily limited to: Gauges, NOSHOK, ASHCROFT, TRERICE AND WINTERS Gauges, Co. No. 95014884 to Co. No. 95011236; Shelf Location O-01-02.
624
Consisting of but not necessarily limited to: Nitrogen Pressure Regulators, WILKERSON, TMT NORGREN Filters, NOSHOK Bottom Connectors, Co. No. 95014259 to Co. No. 95011321; Shelf Location O-01-01.
626
Consisting of but not necessarily limited to: FLEXCO Alligator Steel Conveyor Belt Splicer Fitting for 18 in. Belt, TYCO DV5 Diaphragm, Co. No. 95013851 to Co. No. 95015280; Shelf Location N-01-05.
627
Consisting of but not necessarily limited to: Sight Gauges, In-line Filters, Air Filters, Snap Rings and Related, Co. No. 95015184 to Co. No. 95013528; Shelf Location N-01-04.
628
Consisting of but not necessarily limited to: Sprockets, Taper Bushings, Coupling Hubs, Bearings and Similar, Co. No. 95015023 to Co. No. 95013752; Shelf Location N-01-03.
629
Consisting of but not necessarily limited to: Mechanical Seal Repair Kit, Rotor Bearing with Seal, Bearings, Seals, Collars and Related, Co. No. 95012060 to 95013911; Shelf Location N-01-02.
630
Consisting of but not necessarily limited to: FRISTAM Pumps, 633 Single Seal Kit; PEER BEARING 52mmOD Housing with 20 Bolt Flanges; PEER BEARING 52mm OD Housing, Relube; TINAA Walzlager Bearing; TEMKEN Ball Bearing; FRISTAM 102 Single Seal Kit; and Relate…
632
Consisting of but not necessarily limited to: Pressure Switches; I / P Converter; Ballast and Related, Co. No. 95014478 to Co. No. 95015022; Shelf Location N-02-05. GRAYBAR GE232 Max Ballast, #4-20MA, 5-15 psi, I / P Converter, Dwyer Boiler-Combustion Air…
633
Consisting of but not necessarily limited to: Co. No. 95012173 to 9501194?; 2 to 1/2 amp Fuses, Relays, Switches; Shelf Location N-02-04.
634
Consisting of but not necessarily limited to: Vibrator, Roller Arm, Limit Switch, Thermo-couple, Level Switch, PLC Door Lamp, Relays and Related; 95012505 to 95013497; Shelf Location N-02-03.
635
Consisting of but not necessarily limited to: Flue Sight, Check Valves, Auxiliary Contact, Truck Analog Input, Truck Digital Input and Output, Circuit Breaker, Bleeder Vent and Related, Co. No. 95014844 to 95011136; Shelf Location N-02-02.
636
Consisting of but not necessarily limited to: Air Vent, Solenoid, Low Pressure Switch, Solenoid Pilot Valve, RFI Filter, Coil and Related; 95011326 to 95013511; Shelf Location; N-02-01.
638
Consisting of but not necessarily limited to: DAYTON Float Switch, Brass Float Valve, CENTRAL AIR Inc. 500-ACW Switch, Co. No. 95013459 to Co. No. 95013557; Shelf Location N-03-05.
639
Consisting of but not necessarily limited to: Photoelectric Sensors, Pneumatic Oscillator Pump Controller, Pressure Module, LCD Display Kit and Related, Co. No. 95014264 to Co. No. 95013770; Shelf Location N-03-04.
640
Consisting of but not necessarily limited to: Flow Meters, DUNGS Gas Pressure Switch, COOPER CROUSE-HINDS Gas Pressure Switch, Terminator Cable Fitting Type TMCX285 and TMCX165 and Related, Co. No. 95011208 to 95013850; Shelf Location N-03-03.
641
Consisting of but not necessarily limited to: Flowmeters, BARKSDALE Pressure Switch, Banner Stainless Steel Emitter, Banner Engine Receiver Stainless Steel and Related, Co. No. 95014024 to 95013551; Shelf Location N-03-02.
642
Consisting of but not necessarily limited to: DUGAN Transformer, MAC Valves, KING INDUSTRIES COMPANY, INC. IFNPT PVC EP 60 SCFM, Gas Pressure Switch, 1-1/2 in. GOYEN Valve, Co. No. 95012039 to 95013421; Shelf Location N-03-01.
644
Consisting of but not necessarily limited to: THERICE Thermometer, WIKA 3 in. Pressure Gauges, Burner Cover Gasket, PLATTCO Gasket, Co. No. 95013015 to 95015137; Shelf Location M-03-05.
646
Consisting of but not necessarily limited to: Fabricated Ring Gaskets, 8 in. dia. To 2.875 in. 100+ (est.) total, Co. No. 95013628; Shelf Location M-0303.
647
Consisting of but not necessarily limited to: Gaskets 3/4 in. x 1/16 in. 150 lbs., through 8 in. x 1/16 in. 150 lbs., Co. No. 95013440 to 95013447; Shelf Location M-03-02.
648
Consisting of but not necessarily limited to: Gaskets 1/2 in. FF through 6 in. 3700 150 lbs., Co. No. 95011839 to 95011832; Shelf Location M-03-01.
650
Consisting of but not necessarily limited to: WEKSLER Temperature Gauges, Brackets and Related, Co. No. 95015006 to Co. No. 95010114; Shelf Location M-02-05.
651
Consisting of but not necessarily limited to: DODGE, MARTIN, MADISON, QD Bushings, Metering Drum, SCHNEIDER Output, Analog and I/O Cards, Co. No. 95011121 to Co. No. 95015313, Shelf Location M-02-04.
652
Consisting of but not necessarily limited to: Repair Kits, Graphite Isolation Pads, Screen Mesh, Scale, Freeze and Seat Valve Protection Floats and Cover Gaskets, Co. No. 95012521 to Co. No. 95013483; Shelf Location M-02-03.
653
Consisting of but not necessarily limited to: Repair Kits, Shear Pins, O-Rings, Snap Rings, and Related. Co. No. 95012560 to Co. No. 95015016; Shelf Location M-02-02.
654
Consisting of but not necessarily limited to: TSLIBAKI #RS 50, 10 ft. RIV Roller Chain, DIAMOND 40 RIV 10 ft. Chain, DIAMOND 40 R, 10 ft. Chain and Similar, Co. No. 95012163 to Co. No. 95011938; Shelf Location M-02-01.
656
Consisting of but not necessarily limited to: Readi-Seal Expanded PTFE Gasket Material, 1/8 in. x 100 ft. to 3/4 in. x 100 ft., Co. No. 95015002 to Co. No. 95015006; Shelf Location M-01-05.
657
Consisting of but not necessarily limited to: Alternator Drive, Needle Valve, Relief Valve, Vent Scrubber Blower, Mica Shield, Cushion Garlicky, Slight Glass Repair Kit and Related, Co. No. 95012004 to Co. No. 95015160; Shelf Location M-01-04.
658
Consisting of but not necessarily limited to: Impeller Nut, Seals, Retaining Ring, Coupling Sleeves, Bearings, Washer Gaskets, Repair Kits, Diaphragm and Related, Co. No. 95011767 to Co. No. 95012565; Shelf Location M-01-03.
659
Consisting of but not necessarily limited to: Plugs, Endura Trap, Ball Valve, Shower Head, Co. No. 95013772 to 95015070; Shelf Location M-01-02.
660
Consisting of but not necessarily limited to: TURNER UCSR207 20 Pulley and Related, Co. No. 95013956 to Co. No. 2649; Shelf Location M-01 01.
662
Consisting of but not necessarily limited to: 2- RADNOR Flowmeters for Mig and Tig, (Both NEW and UNUSED); 4- Boxes RADNOR Scratch Brushes; RADNOR Copper-Coated Electrodes; Alloy Grounding Alligator Clamps; Cable Connectors, Welding Hose, MSAV-Gard Access…
664
Consisting of but not necessarily limited to: LINCOLN ELECTRIC Fleetweld 5P Welding Rods (NOTE: 2- Cans are Open); ESAB3- Cans Atom Arc 7018 Welding Rods, 4- Cans LINCOLN ELECTRIC Excalibur 7018-A1 MR Welding Rods; 1- OXFORD ALLOYS INC Stainless Steel, #3…
668
FLOWSERVE Rebuild Kit for Syngas Cooler, MOBIL Premium Grease for Ceramic Bearings, Aerosol Cans of CRCOD Contact Cleaner, Permeable Membrane Kit, Grainger and Related; Shelf Location R-01-04.
669
Consisting of but not necessarily limited to: JOHN CRANE LEMCO Parts, 1- Aerosol Can of Latite, N2-Regulator I.D. Fans, 3- Boxes of Blue Line Hand Pads, 2- Boxes of Blackstone Hand Pads, 4- 1/2 in. Hydraulic Hoses; Shelf Location R-01-03.
670
Each DURHAM Multi-Bin/Compartment containing Assorted SWEDGELOCK Fittings, 7- PARKER Fittings in Boxes, (NOTE: The Smaller Cabinet has NO Contents/Fittings); Shelf Location R-01-02.
671
8 in., Consisting of but not necessarily limited to: 8 in. Grow Water Tank Valve, Ram Wheels for Gasifier Project and Related; Shelf Location R-01-01.
672
Consisting of but not necessarily limited to: 4- Nylon/Plastic Diaphragm Pumps, 2-2 in. and 2- 1/2 in.; Shelf Location R-0101.
674
Powered by HONDA GX240 8.0 hp Gasoline Engine Unitized and Mounted in Offshore Square Tubing Metal Frame with Diver's Breathing Equipment, 80 gal. (est.) Horizontal Air Receiver Tank mounted in Offshore Square Tubing Metal Frame. With DIVERS AIR SUPPORT E…
675
Consisting of but not necessarily limited to: 1- Box FISHER PARTS I / P Assembly/Shroud, 3- Boxes JDM TECHNOLOGIES INC. Pneumatic Regulators, 2- Boxes SHINKO Model DCL-33-A-SM Multi-Range, 2- Boxes PEPPERL+ FUCHS.
676
1 in. Tri-Packs PP, TRI- PP1, 5 CF Condensation Tower Packing; on Pallet.
678
Consisting of but not necessarily limited to: 24 in. Manway "L" 3700, Co. No. 95012033, TEADIT Flexible Graphite Tape for 1 in. and 1-5/8 in. Bolt Holes, 30 in. 75 Series, And 6 in. 150 Series, GARLOCK 3700, Co. No. 95013566 and Co. No. 95013567, 1- 4 in.…
680
Consisting of but not necessarily limited to: 3- Electric Motors, Co. No. 95011984, Co. No. 95012075; and Co. No. 95012101; Shelf Location CC-01-01, in Wood Crate. (NOTE: Appear to be NEW and UNUSED.) With GOVERNOR VALVE PARTS: Consisting of but not neces…
681
42 in. Mesh Mist Eliminator, 3- Piece Set, Co. No. 95013346; 72 in. Mist Eliminator 3- Piece Set 95013343; Shelf Location DD-01-02, in Wood Crate. With LOT 6- SPRAY NOZZLES AND RELATED: Stainless Steel, Spray Nozzles; Shelf Location DD -0102. With LOT SPR…
682
Flat Sheets, various thicknesses, of Carbon and Stainless Steel; SCOTCH Cushion/Bubble Wrap; GGS; Sand Bag;, Stainless Steel Wire Screen and Related; Shelf Location DD-02-01, 25- (approx.) Boxes, 1- Roll and 2- Bundles.
683
Consisting of but not necessarily limited to: Turbine Sync Check Relay; Digital Sync and Condition Controller; Digital Exciter Control System; Generator Protection System; 1- Box Boiler Analyzer and Generator Spare Parts, Co. No. 95012573; Parts for Turbi…
684
Consisting of: 1- 4-1/2 in. and 1- 1-1/2 in. dia. x 25 ft. long; With 1- Wood Crate of Turbine Lifting Equipment Co. No. 95012604; Shelf Location B & C CC-01-03.
685
Consisting of but not necessarily limited to: Co. No. 95013450, Co. No. 95012056, Co. No. 95012055 and Co. No. 95011986; Shelf Location, A CC-01-03, in 6- Boxes (approx.).
686
100107; Shelf Location B&C CC-01-04, with Clamps for the Sweet Water Condenser; on 2- Pallets.
687
Consisting of but not necessarily limited to: Large Gear with Spur Cut Teeth; Blower; Spherical Segment, Sliding Sleeve; Pilot Bearing; Syngas Compressor Parts; America Air Filters and Related, Co. No. 95011751, Co. No. 95015390, 95011265, 95011268; Shelf…
689
Consisting of but not necessarily limited to: Co. No. C CC-02-02., Co. No. 95011299; on Pallet, 5- Wood Crates and 2- Boxes.
690
Consisting of but not necessarily limited to: Parts and Special Tools for the Syngas Compressor; 1- Job Box (or Similar); With Williams Steel Job Box; ATLAS COPCO Syngas Coupling; Shelf Location C & B CC-02-02, on 2- Pallets.
691
Consisting of but not necessarily limited to: Metal Chest with Contents, if any, Gas Filter, O- Rings, 1/2 Retainer Disk, (New) Compressor Diaphragm Pump and Related; with Parts; Shelf Location CC-02-02.
692
1- Crate is Coupling Co. No. 95011260; 1- Crate Main Oil Pump Co. No. 95011302; Shelf Location A B & C CC-02-03, in 2- Wood Crates.
696
1-1/2 in. dia. And smaller, Ball and Other, Threaded and Flanged, 2/3 (est.) are Stainless Steel; Shelf Location BB-01-01.
697
Most all appear to be Stainless Steel, Assorted, but most are 1 in. to 1/2 in. dia.
698
Most are 1-3/4 in. and smaller, Most are Stainless Steel, Check and Threaded; Shelf Location BB-01-01.
699
Most are Stainless Steel, Ball and Butterfly, Most are Threaded, 3- (approx.) are Flanged, Most are 2 in. dia.; Shelf Location BB-01-01.
701
Consisting of but not necessarily limited to: HCN Scrubber Parts and Gaskets; Shelf Location B BB-01-02, in Wood Crate.
702
Conveyor Belting, 16 in. wide, Co. No. 95011201; Shelf Location C BB-01-02, A BB-01-04.
703
Ball and Rising Stem, 1-1/2 in. dia. And smaller, Most are Threaded, 4- (approx.) are Flanged, most are Stainless Steel; Shelf Location A BB-02-01.
704
Most are Butterfly, 1- Rising Stem, 1- Ball, 4- (approx.) are Flanged 6 in. to 2-1/2 in. dia.; Shelf Location B BB-02-01.
705
4 in. dia., 2- Rising Stem, Weld Neck, 2- 4 in. Check, Flanged, WGE; Shelf Location C BB-02-01.
709
Assorted, Consisting of but not necessarily limited to: 3- 30 in., 18 in., 16 in., 14 in., 12 in., 10 in., 8 in., 6 in., and smaller, Pallet Rack Shelving End Cap.
710
5- 5 gal. Buckets, Consisting of but not necessarily limited to: 2- NALCO Nalclean, 2- KORUNDAL Mortar, 1- MODAC Acrylic.
712
Consisting of but not necessarily limited to: 3- 17 in. Chain Drive Sprocket with 3-1/2 dia. Shaft Hole, Co. No. 95011501, 1- Hub Co. No. 95011502, 2- Pillow Block Bearings Co. No.95011494, 2- Boxes Co. No. 95011496 and Co. No. 95011497, and Related Items…
714
Consisting of but not necessarily limited to: 2- CHANUTE 9 in. dia. x 10 in. tall, with 3- Weld Neck Fittings; on Pallet.
715
8- Pieces (approx.) Steel Strap, 4-3/4 in tall x 2-1/4 in. wide x 6 ft. long, 2- Pieces 1/4 in. tall x 4 in. wide x 6 ft. long (approx.), Co. No. 9501409; Shelf Location C AA-01-01.
719
1- Round and 1- Square, Bonded HIC-Sewer, Co. No. 95011522 and Co. No. 95013026; Shelf Location B&C AA-01-04.
721
2- Strands Chain in Flite, Co. No. 12001445; Shelf Location A B & C AA-02-01.
722
Co. No. 95011183 and Co. No. 95011185; Shelf Location A AA-02-02, in Crate and Box.
723
Co. No. 95011187; Shelf Location B AA-02-02, in Wood Crate.
725
Stainless Steel, 16 in. dia. (est.) 100103 AMERICAN BOA INC.; Shelf Location B AA-02-05.
728
Consisting of but not necessarily limited to: Section Load Bearing columns, Connection Lateral Beams, Each Section having 5- Shelves.
730
1- Unboxed, 1- Box FLOW SERVE Parts, 2- Boxes of Co. No. 95011521, 2- Boxes are Undetermined.
731
1- Crate of Explosion Vents, Co. No. 95011871; and Co. No. 95011157; and 1- Crate Bag House Lid Gaskets, Co. No. 95011871; Shelf Location B C G-01-01; in 2- Wood Crates.
732
Consisting of but not necessarily limited to: 24 w x 24 l Vent Explosion and Frame Vent, Co. Nos. 95011150, 95011155, 95011156; Shelf Location AB G-01-02, in 3- Wood Crates.
733
4- Boxes (approx.) DODGE Co. No. 95014899; 3- Boxes (approx.) Rexnard Co. No. 95014897; 4- SKF SAE 522 Pillow Block Bearings, Co. No. 95015293; (NOTE: All 4- appear to be NEW/Unused.) Shelf Location B C G-01-02. With Bearing Housings on 2- Pallets: Shelf …
734
1- Shaft, Co. No. 95011931; Shelf Location A G-02-02; in Wood Crate, on Pallet.
735
1- Shaft Assembly, Co. No. 95011932, 1- END PWR 3180XLOIL NC 4340 SFT, Co. No. 95011891; Shelf Location AB G-02-01; in Wood Crate and Box, on Pallet.
736
Co. No. 95011562 and 1- Shaft Co. No. 95011134; Shelf Location AB G-02-02.
737
IMPLR, 5V w/TFL O-Ring, dia. 15.75 x 12.8125, Co. No. 95011333, Sideplate, Suction, Co. No. 95011801, Cover, Taper w/VPR Ring, Co. No. 95011930, Swirler 325, MM 9112120, Co. No. 95011226; Shelf Location C G-02-02; on Pallet.
738
Consisting of but not necessarily limited to: 12- (est.) Cat. No. 5BHLE-150E Capacitors, Co. No. PS11358; Shelf Location A G-03-01.
740
Consisting of but not necessarily limited to: 6- PARKER Series 7392E Water Suction Hose, 150 psi max WP with Stainless Steel QC End Fittings; 1- CONTINENTAL Conti Tech Purple Flexwing, 150 psi max WP; Shelf Location AB G-03-02.
741
Consisting of but not limited to: 2- 8 in. Butterfly Valves, 4- Boxes JIB Bearing Units, 1- Box DODGE V6B Screw and Related; Shelf Location BC G-03-02, on Pallet.
746
BANDO, GATES and Others, 6- Size Levels, 5 ft. center to center and smaller.
748
8- each, Co. No. 95011158; Shelf Location AB G (G)-01-01; Explosion Vent Frames Co. No. 95011158; Shelf Location C G-01-01, in Crate.
749
1- COV, ST Box TPR BO w/VPE Ring Co. No. 95011933, 1- Impeller, 5V with O-Ring, dia. 21.63 x 20.68, Co. No. 95011332; Shelf Location AB G (G)-02-01; in 2- Crates.
752
Impeller, SA w/TFL O-Ring 5 Vane dia. 8.625, Co. No. 95011446, Adapter, ring, ductile iron, Co. No. 95011473, Cov, ST Box SA Taper Bore, Co. No. 95011474, Cov, ST Box SA Big Bore (STD), Co. No. 95011475, Adapter, Frame Assy, Co. No. 95011477, Adapter, fra…
753
Co. No. 95011507 through 95011482; Shelf Location A B C F-01-02.
755
Tray Assembly - 430 SS (37"), Co. No. 95011917, Radicon Model C062056, Co. No. 95015060; Shelf Location A B F-02-01 in 3- Boxes.
756
Filter 2.75" X 40" 5 Pleated; 24/Case, Co. No. 95011892; 7- Boxes in Shelf Location AB F & E-02-02 and 4- Boxes in Shelf Location AB F-02-03.
757
1- SKF, 95012486, 2- SEAL MASTER, 1- KECKLEY BASKER, Co. No. 95013465; Shelf Location AB E-01-01.
758
High speed coupling half (gearbox), Co. No. 95011102, Coupling Insert, Co. No. 95011106, High speed coupling half (motor), Co. No. 95011107, Packing, Co. No. 95011119, Connector, Spark plug, Co. No. 95011125, Nut Lock, Co. No. 95011213, O-Ring IGN Cap, Co…
759
Consisting of but not necessarily limited to: Mechanical Seals, DODGE Bearings; 2-BEARING, 4 7/16, 4-BOLT, S2000, E-TYPE, Co. No. 95011180, Co. No. 95011969, 2- Bearing Take up Block DODGE TPHU-S2-307R, Co. No. 95011177, 2- Bearings, VPS-347, Pillow Block…
760
Consisting of but not necessarily limited to: Impeller, SA W/TFL O-Ring 6 Vane, dia 11.875, Co. No. 95011457, Plate, Titanium for 4-007-gtv=013-00, Co. No. 95011238; Shelf Location C E-02-02.
761
Consisting of but not necessarily limited to: 2-Basket Strainers (Quench Water) P-0201A/B, Co. No. 95014892; Shelf Location A E-02-02.
762
Consisting of but not necessarily limited to: Spare Filter Bags for Conveying Bag Filter, Train 1, Co. No. 95011520; Shelf Location C-03-01 to C-03-05; in 35- Boxes (approx.).
764
Consisting of but not necessarily limited to: HSG PVC 5-40" Cartridges, Co. No. 950119581, 2- 5 gal. Buckets Opti-Clean 'A' Cleaner Low pH 25lb Pail, Co. No. 95012215; Shelf Location ABC D-01-01.
765
2-BRG, BALL SET SKF 7315 BEAGY, GASKET, 24" MANWAY QUENCH TOWER, PSV 4 X 4, PSV 4 X 4, 3- REGULATOR REPAIR KIT, 3- MINOR REPAIR KIT, REPLACEMENT CYLINDER FOR ASH SUMP NOZZLE, BEARING, BEARING 22320 E SKF, BEARING 31317 J2 SKF, BEARING 31317 QQ SKF, SEAL R…
766
PMP/MTR .25GPH 110V 150PSI PVC;LOC: EW, DPO54P, Co. No. 95011816, Alkali Dosing Pump Repair Kit, Co. No. 95011870, Spray valve - 316 -L SS De-Aerator, Co. No. 95011916, LIQUIFLO Pump, P-0306X s/n 56729-1-2, Co. No. 95012643, WALCHEM Pump, Metering P-0313X…
767
Float Valve & Ball Assembly, Co. No. 95011560, RO Assembly VLV DIAPH PVC 2" TU 225 psi @70 F; LOC:EW, Co. No. 95011814, RO Assembly Dosing Tank Level Switch; Loc: EW, ASMLY, Co. No. 95011820, Pump, Diaphragm Caustic- CIP, Co. No. 95013477; Shelf Location …
768
Gasifier Water Hoses and Similar, Co. No. 95014890; Shelf Location ABC D-01-05, in 2- Boxes and 4-Bundles (approx.).
769
2- Geared Motors with Nema Adapter Type SK373 1N56C (21rpm) Co. No. 95013057, Co. No. 95013058, Geared Motor with Nema Adapter Type SK172 1N56C (60rpm) Co. No. 95011962, Impeller Handing LG FC 636/IMP//LG Co. No. 95011823, Impeller Handing RG FC 636/IMP/S…
770
Bearing (PN: GT-15) 14-29P Co. No. 95011376, Bearings, 2-3/16" dia. Scrubber Blower HCPX211-35-AH 2-3/16 21914-PR Co. No. 95011463, Bearing, Flanged 4H SCM 2.4375 Condenser 311146-006 Co. No. 95011982, Hub Falk 1070T 1.875 Co. No. 95012432, Bearing, End T…
771
Bearing, 2-3/16" BROWING Metering Drum VFCS-335 511208 Co. No. 95011186, 2- Coupling Grid, FALK, 1110T10 0758254 1100-1140t10/20 CPLGS Co. No. 95012022, 95012237, Bearing seal kit Fixed Recirc Fan Co. No. 95014900, Grommet Kit Free brg Recirc Fan Co. No. …
772
INTELLITOP 2.0 24VDC 2P1S PG-9 PG-11 INT Co. No. 95012442, Actuator 2705211 BFV for 1.5 Co. No. 95013895, Actuator 2705212 BFV for 2-3 in Co. No. 95013896, .75 " Butterfly Valve 316SS w/Actuator E60 Co. No. 95014482, 2" Sanitary Butterfly Valve w/Actuator…
773
Consisting of but not necessarily limited to: 'Made-Up', 3/4 in. dia. x 42 in. and smaller (approx.); Shelf Location ABC D-02-05.
774
Flow Plate NT50X H 0.5 Titanium LOC-IN E Co. No. 95012240, Flow Plate NT50X V 0.5 Titanium LOC-IN E Co. No. 95012241, Flow Plate NT50X H 0.5 1.4401 LOC-IN EPD Co. No. 95012242, Flow Plate NT100X H 0.5 1.4401 Loc-In EP Co. No. 95012243, Gasket NT50X EPDM C…
775
Belting for Fines Conveyor, Wind Socks, CONNECTOR BOOT, BICARB SILO, Co. No. 95013958, 950014124, 95013576, 3-95013577, 2-95013578, 95015135, 95013955, 95015050; Shelf Location ABC D-03-02.
776
Consisting of but not necessarily limited to: Gaskets; Shelf Location ABC D-03-03.
777
Consisting of but not necessarily limited to: 3- coils, 'Made- Up' 3/4 in. x 3/8 on. x 10 ft. to 10 in. (approx.), Co. No. 9501240 to 95012361; Shelf Location ABC D-03-05.
778
Adapter SNW 22 x 3-15/16 Syngas ID FAN, Co. No. 95015294, Coupling Grid and Cover- Recirc Fan, Co. No. 95011519, Grid & Cover Assembly ID FAN C, Co. No. 95014952, Coupling Grid & Cover Assy Syngas ID FAN, Co. No. 95015296; Shelf Location BC C-01-01, in 11…
779
1/2" JORDAN GLOBE LO FLOW VALVE Cv=0.05, 1/2" JORDAN GLOBE LO FLOW VALVE Cv=1.0, BEARING SLEEVE DWG A-5993173, VIBRATOR VS-510 VIBCO, SEAL-JC 5610Q HSP-38058 X18F, Seal Repair Kit M210604, Co. No. 95012543, 95012546, 95012437, 95013761, 95011670, 95013516…
780
SEAL, JC 5610Q HSP-1010803 X18F5, SEAL, JC 5610Q HSP-1026124, SEAL, JC 5610Q HSP-39035 X18F, SEAL-JC 5620PR HSP-38070 X18, SEAL-5620P HSP-38070 X18F551, SEAL-5610Q HSP-38068 X18F551, Seal - JC M58017 Refurbished, SEAL, JC 5610Q HSP-38068 X18F551 201A, SEA…
781
3" Polyethelene Sump Pump Strainers, 2-Seat 8" for PLATTCO Slide Gate, Packing for PLATTCO Slide Gate; Co. No. 95013574, 2-95014297, 95014298; Shelf Location A C-01-04.
782
4-Spring Coil Prime Red, 2-Spring Coil Drive Grey/White, Stabilizer Arm Assy, Flow Switch, Magnetrol 110-FS-02240, Basic Drive 5203J25A; Co. No. 4-95011144, 2-95011143; Shelf Location ABC C-02-01.
783
Clamp Spring Coil Drive, Torque Nut, Spring Die, SKF Bearings, Bearing Sleave, Lock Nut; Co. No. 2-95011803, 95011926, 95011330, 95011146, 95011148, 4-95011935, 95011150, 95011145; Shelf Location ABC C-02-02.
784
Mechanical Seal for Boiler Feed Water Pump, O-Rings, Lock Washers and Nuts, Galvanized and Stainless Steel Nuts and Studs, Seal, Spacer Hub, O-Ring 2.5X206ID, O-Ring, O-ring #274, Coupling Keys, Throw Out Bushings, Stainless Bolts, Co. No. 2-95011957, 950…
785
Casing Gaskets, O-Rings, Co. No. 95011646 to 95011729; Shelf Location AC C-02-04.
786
Consisting of but not necessarily limited to: Co. No. 95011151 to 95011142; Shelf Location AC C-03-01, in 5- Boxes and 2- Loose Items.
787
Accumulator Charging Assembly, Hook Spanner Hose, Co. No. 95011625 to 95012482; Shelf Location ABC C-03-02.
791
6 in. and smaller, 45 deg. long Sweep Ells, Blind, Weld Neck, Threaded, Quick Change Fittings, 3 in. OD x 20 1/2 (est.) Flanged Spool. Carbon Steel, and Stainless Steel; Shelf Location A B C B-01-01, B-01-02, B-01-04.
792
1-1/4 in. dia. x 20 ft. long (est.), with 60 + (est.) Joints, Shelving Location ABC B-01-03.
793
Consisting of but not necessarily limited to: 3- Joints (approx.) 1-1/4 in. dia. x 4 ft. long (est.) Stainless Steel Pipe, Threaded and Similar Pieces, Co. No. 95013008, Shelving Location, ABC B-03-01.
794
Surge Hopper Vent Filter Cartridge MF/D380, Surge Hopper Vent Filter, MF/D 380 Cartridge Filter Canisters Assembly Housing 00012982; Co. No. 20-95013051, 24-95014306 Shelving Location A B-03-03, with 28- Boxes, Shelving Location ABC B-03-04.
797
SHIMADZU UV Mini-1240 UV-VIS Spectrophotometer, s/n A109549, A-70 Protective Clothing Sleeve Protectors, BRADLEY Halo Emergency Eye Wash Covers Part No. S90-390, 6- Check Weights, Partial Case of Lab Training Foam TF-1170; Shelf Location C E-01-01.
798
Consisting of but not necessarily limited to: RYAN HERCO, CASCADE AIR, SCBA Mask and Air Harness, DuPont, TYVEK Coveralls; Shelf Location ABC E-01-02.
799
Consisting of but not necessarily limited to: PRO FITTER, SC MERV 8 Pleated Filter, and Similar, Co. No. 95014429; Shelf Location ABC E-01-03.
800
Consisting of but not necessarily limited to: THERMO SCIENTIFIC 50 mL Centrifuge Tubes, ANSELL TorchNTuff, SAS, DERMA-LITE PF EX M 6607-20, Model 1M Eyewash, 2- Tubs of Chair Arm Rests; Shelf Location ABC E-02-01 and LL-02-01.
801
Consisting of but not necessarily limited to: EPPENDORF Style No. 14955126, Disposable Plastic Curette, PIRAMAL GLASS USA, INC., Clear and Amber Glass Bottles with Caps, PHOENIX CLOSURES, INC. Lab Sample Bottles and Lids; Shelf Location ABC E-02-02, and L…
802
Consisting of but not necessarily limited to: PIRAMAL GLASS - USA, INC., 32 oz. and 500 ml Bottles; Shelf Location ABC E-02-03.
803
Filter 20" w x 20" h X 2" MERV8 PN 4300497, Co. No. 95014427; Shelf Location C E-02-04.
804
Consisting of but not necessarily limited to: SILGAN 32 oz. Sample Bottles; Shelf Location ABC E-02-05.
805
Consisting of but not necessarily limited to: Metal Cabinet, U-Line 4- mil Plastic Bags, Cardboard Boxes, New/Unused, 120 cc, W-H Round Natural; Shelf Location ABC E-03-01 and LL-03-01.
806
Consisting of but not necessarily limited to: PIRAMAL GLASS Bottles, RESTEK Columns, Lab Filters from Trace Environment, 5- gal. Metal Buckets with Lids, (New/Unused) U-LINE Insulated Shipping Kits, FRISTOM, TM 72308 Filter Elements; Shelf Location BC E-0…
807
Consisting of but not necessarily limited to: PRO FITTER Filters, Koch Multi-Pleat XL, Co. No. 95014428; Shelf Location AB E-03-03 and LL-03-03.
808
Consisting of but not necessarily limited to: 12 in. ID, (est.) Rubberized, Flanged Vibration Connection Joints; Shelf Location ABC E-03-04, and LL-03-04; ABC E-03-05, and LL-03-05.
811
Consisting of but not necessarily limited to: PVC Pipe Fittings, 8in. dia. to 1 in. Couplings, 2-1/2 in. Valves, Bolted Flanges and others; Shelf Location ABC L-01-01.
812
Consisting of but not necessarily limited to: FISHER, SPEARS, PVC Pipe Fittings, 2- 1 in. Flanged Stainless Steel Tees, 1- Stainless Steel Rotor; Shelf Location ABC L-01-02 and K-01-01.
813
End Cap For Pro 8-300 Production Membrane, Co. No. 95013500, Head Seal Production Membrane, Co. No. 95013501, Permeate Port Seal Production Membrane, Co. No. 95013502, Oil Guard, 680 2-Pole Split Inside (New), Co. No. 95013537, Retaining Ring For Permeate…
814
Consisting of but not necessarily limited to: Thermocouple Element SSI 110-TIT-02232A Co. No. 95013481, RTD ROSEMOUNT 140-TIT-05222 Co. No. 95014435, RTD Critical 60002173 Bullgr 6970399137 Co. No. 95014319; Shelf Location ABC K-01-03 and A K-01-04.
815
Consisting of but not necessarily limited to: GRUNDFOS VFD Drive 20hp 480/27, s/n 006111H152, Co. No. 95011246; Shelf Location C L-02-01.
816
USB Converter DSF-2000, 3425-057-01, Co. No. 95011559, SD Plus Controller, SE3006, Co. No. 95011948, System Power Supply, 24 vdc Input, SE5009, Co. No. 95011955, Redundant Pair of CHARM I/O Cards, SE6502, Co. No. 95011956, Simplex Logic solver, VS3201, Co…
817
MAGNETROL Element 270-LIT-07414, Co. No. 95012298, MAGNETROL Element 270-LIT-07404 Co. No. 95015235; Shelf Location BC L-02-03, in 2- Tubes.
818
Stainless Steel Packing Material for the Quench Tower T-201 and Vent Scrubber T-401, Shelf Location ABC L-03-01; ABC L-03-02; ABC L-03-03; ABC L-03-04.
819
Consisting of but not necessarily limited to: Fully Managed Ethernet Switch, Power Supply, Touch Level Indicator; Shelf Location A K-02-02.
820
Consisting of but not necessarily limited to: Meter Cable, 20 and 40 mm; TUCK 8- Pin 40 and 60 mm, 1- Spool, Co. No. 95014909 to 95014002, of Multi-Conductor Wire; Shelf Location ABC K-02-03.
821
Consisting of but not necessarily limited to: Rotameter 1024NM0D2AC4E9CB0001, Co. No. 95014806, Model GT1000 Glass Tube Flowmeter Co. No. 95014957; Shelf Location C K-01-04.
824
Consisting of but not necessarily limited to: FURNESS CONTROLS Model 254 TURBO Boiler Silence Outlet, Co. No. 95011825 to P.O. 28989, CONREELS Coil of Electrical /Electronic Cable, 1- Drive Sheave 24 in. dia. (est.) 2- V-Belt Groove QD Hub, 1- Shaft; Co. …
825
Consisting of but not necessarily limited to: Limit switch: Westlock 2004NBY-2A-2M02, Level Temperature Switch, 1st Growth Agitator Seals, Boxes of Misc. Parts; Co. No. 95012406, 95011120; Shelf Location ABC J-01-02.
826
1: Tri-Packs PP, Tri-PP-1, 5CF; Shelf Location ABC J-01-04, and ABC J-01-05.
828
Consisting of but not necessarily limited to: DAYTON Float Switch and MONITEUR Model 41N-E1N-SF, Co. No. 95014958 and 95015059; Shelf Location C J-02-02.
829
Consisting of but not necessarily limited to: AGM INDUSTRIES, INC., Mild Steel Self Locking Washers, 2-1/2 in. square, 10 ga., INSWOOL Ceramic Fiber Blanket, Co. No. 95013071; Shelf Location ABC J-03-01.
830
Consisting of but not necessarily limited to: Yoke,actuator,1-1/8" bore, guide bushing FV-05008 Flow Control Valve Yoke, Actuator, 1-1/8" Bore, Guide Bushing 24184-10G Co. No. 95011470, PARKER Solenoid Valve, Co. No. 95012426, Controller, Rotary Valve Fie…
831
Consisting of but not necessarily limited to: Level Switch Hi Magnetrol 120-LSH-03818, Gauge Glass Redline 3/4" x 14", Co. No. 95013599, 95014148, 95014969; Shelf Location AC I-01-03.
832
Transformer Blower MCC 64C2142G01 Co. No. 95011604, Water diffusers, pn:16-1111P Z-0720 16-1111P Co. No. 95012199, EATON SVX9000 DeviceNet 75HP 480V NEMA 1 Co. No. 95014956, Breaker 400A 3 Pole EATON HKD 65K Co. No. 95015061; Shelf Location ABC I-02-01.
833
Consisting of but not limited to: Ignition Wire, Control PC Board, 400A Aux Interlock, Contactor Coil, ISO Switch AUX Interlock Assembly, Fuses, Voltage Sensor, CT Sensor, Rectifier Phase Kit Frames A & B, Control Fuse Kit, SC9000, 3 Phase Loss Monitor, 4…
834
Consisting of but not necessarily limited to: ThermaCouples for 410, 412, 413, Co. No. 95013451, 95013453, 95013454; Shelf Location C I-02-03.
835
VEGA PUL62/68 Horn/Antenna-Standpipes, Co. No. 95013937, Liq Level GA 22" w/Guards & Valves, Co. No. 95012318, Float Switch FLOTECT KO Pots, Co. No. 95013876; Shelf Location ABC I-03-03.
836
Consisting of but not necessarily limited to: GATES, STRONG, BX96, 3VX750, 3VX600, and Similar; Shelving Row End Cap.
838
Consisting of but not necessarily limited to: Transmitter PH Rosemount 110-AIT-02409, Pump AODD 3 Inch Alum. Const. WIL-FLEX WILDEN Muffler, Yellow U-Shaped Brackets; Co. No. 95013887 to 95013525; Shelf Location ABC H-01-01.
839
Consisting of but not necessarily limited to: Transmitter ROSEMOUNT 140-PIT-05014 Co. No. 95011554, Transmitter ROSEMOUNT 110-FIT-02005 Co. No. 95012503, RTD Element ROSEMOUNT 110-TIT-0204 Co. No. 95014260, Manifold ROSEMOUNT 0305RC32B21B4L4 Co. No. 95014…
840
Consisting of but not necessarily limited to: ROSEMONT, Conductivity Sensor Cable and Related Parts, RTD ELEMENT ROSEMOUNT 120-TE-03815, Co. No. 95014189, Thermowell ROSEMOUNT 120-TIT-03815, Co. No. 95014191, RTD & TRANSMITTER ROSEMOUNT 260-TIT-08151, Co.…
841
Consisting of but not necessarily limited to: SANDPIPER 1/2 PVDF - Diaphragm Pump, PVDF PTFE - S05B2KITPNS000, Santoprene Backup Single Double Diaphragm Pump, 23 gpm, 100 psi S07B1K2KPNS000; Shelf Location H-01-03.
842
Consisting of but not necessarily limited to: EMERSON PROCESS MANAGEMENT, TRANSMITTER TEMP 644 ROSEMOUNT 0-500FAir Hoses with End Fittings, 1- Flexible Pipe, 3- Link Bars, Co. No. 95014105; Shelf Location ABC H-02-01, on Pallet.
844
Consisting of but not necessarily limited to: HONEYWELL Mod Motor/Gas Upper/Low Burner Co. No. 95012297, DWYER Mercoid Spdt Snap Switch Co. No. 95013555, Vibration switch EVAPCO Co. No. 95013569, FLOTECT Switch N2 Gasifier Purge Co. No. 95013861, ROSEMOUN…
845
Consisting of but not necessarily limited to: Transmitter ROSEMOUNT 120-LIT-03034A FIT-03066 Co. No. 95011425, Transmitter, 220-LIT-07100 A LIT-07100-A Co. No. 95011430, Transmitter ROSEMOUNT 110-TIT-2032 & A LIT-03034-B Co. No. 95011549, Transmitter ROSE…
846
Consisting of but not necessarily limited to: BALDWIN Filters, Co. No. 95015246, 95015330, 95015352, 95015353, 95015354, 95015356, 95015357, 95015360; Shelf Location ABC H-03-01.
847
Consisting of but not necessarily limited to: BALDWIN Filters, Models: B495, B76-SS, BF1382-SP, BT839 and Others; HITACHI MOTORCRAFT, JOHN DEERE, CARQUEST and Others; Shelf Location ABC H-03-02.
848
Consisting of but not necessarily limited to: BALDWIN Filters, Model PA4991, BF7802, PF7744, FIRE PUMP Filters, GOLD Filters, CAT, CARQUEST, Co. No. 95015239 to 95015335; Shelf Location ABC H-03-03.
849
Consisting of but not necessarily limited to: BALDWIN Filters RS4621, Cabin Air Filters, Co. No. 95014867 to 95014865, HITACHI 4642122, Full Flow Fuel Filters, Oil Filters; Shelf Location ABC H-03-04.
850
Consisting of but not necessarily limited to: Gaskets, Various, 30 in. dia. (est.) and Smaller; Shelf Location AB H-03 05.
852
Consisting of but not necessarily limited to: 60 sq. ft.of 2 x 36 x 20 FG Rigid Roll Jacketing, FSK 016 x 36 x 100 Roll SM Aluminum with Surlyn Insulating Material.
853
Activated Carbon Injected into the Gas Stream that Falls Out into the Bag House; DARCO FGD, LOT NO 8131391, NET WT 900 LBS, PR 2142.
854
With 4- Drive Belts, 14MGT-2520-20, Co. No. 95011349, 1- Box Replacement Blades, Syngas Cooler Fan, Co. No. 95011359.
856
And PISTOLE 4- Fire Adjustable Spray Nozzles, Grip Type.
857
Consisting of but not necessarily limited to: Pump Line Shaft, Deep Sump powered by BALDOR RELIANCE 5 HP (EST.) Electric Motor.
860
Consisting of but not necessarily limited to: 1- Flare Pilot Assembly 85 x 20 x 22 in. Stainless; in 3- Wood Crates.
861
Used to Spray Service Water to Clean Flare Tips and also to Maintain Minimum Flow when in Service for Cooling, on Pallet.
862
ANNUBAR Rosemount 110-FIT-02005; Co. No. 95011417.
865
3- Deep Side Vulcanized Belting and 1- Pallet of Link Chain, Drag Type Steel Conveyor; on Pallet and 2- Wood Crates.
866
5- Valves per Box/Crate (approx.) Flanged, 16-150 WCB, 8-600 WCB and smaller.
867
RATHGIBSON, 10 ft. long (est.) x .875 x 0 049 Avg. TP3 Stainless Steel, and 1- 4 ft. long (est.), MAGNETROL ELEMENT, Co. No. 95015236.
868
Consisting of but not necessarily limited to: 20 in. dia. x 3 in. dia. lower x 36 in. high (est.) upper.
870
Consisting of but not necessarily limited to: TITUS, WALKER & BOGE Part No. 558000308P Filter Element, KATY EQUIPMENT, INC. Compressor Lubricant, ATOMUFFLER; on Pallet.
871
Unitized and Mounted on a Stainless Steel Freestanding Frame.
872
Consisting of but not necessarily limited to: Suction Strainer, Filter Element, Hoses, Ram Scraper, Couplings and Similar, Co. No. 95013575 to 95013040; in Wood Crate on Pallet.
875
S-Series with Polypropylene Cross Flow Filtration Elements, Co. No. 95014173, 35 Boxes, Some Partial; on 3- Pallets.
876
Consisting of but not necessarily limited to: 1- Shipping Foreman's Desk, Steel; Single Pedestal, Metal, Desk, 30 in. x 60 in.; U-LINE Parts Boxes/Bins; 2- Swivel Chairs, Bookcase, 5- Shelf, 36 in. wide (est.); 2- HON Lateral File Cabinets, 1- 5- Drawer, …
880
With 2- GENERAL ELECTRIC, Lucalox Lamps; 8- VICTOR Gas Pressure Regulators, Each having 2- Gauges, Box of Trash Can Liners; Box of Miscellaneous Computer Related Items.
882
Consisting of but not necessarily limited to: GRANGER, DAYTON, QUICK CONNECT Fittings 3 in. dia. and smaller, Stainless Steel and Other; 4- Boxes of FASTENAL Fittings.
884
Consisting of but not necessarily limited to: 2- Differential Gas Pressure Regulator and Gauge Sets, 1- with Long Hoses; 4- ROSEMONT Analytical Remote Controllers; Connect Link 490; 3- Masterlink L/S and 4- Easy Load II and Related.
886
4- Drawers, Locking, Consists of but not necessarily limited to: File Folders, Catalogs, and Related.
888
Each in Storage/Transportation Case; Hydraulic Piston and Actuators.
890
Consisting of but not necessarily limited to: Label Tape, 11- Boxes of BRADY BMP 21- PLUS Cartridges in White Perma-Sleeve White Vinyl, White Nylon and Others.
900
Consisting of but not necessarily limited to: NORTON, MELABO, GEMINI, Grinding Wheels, STARRETT, Bore Gauge, RED HEAD, TRUBOLT and Related Tools.
901
Consisting of but not necessarily limited to: Smart Flow, 48 in. x 48 in. x 34in., Part No. 94-M28-0005, in Wood Crate.
902
Consisting of but not necessarily limited to: 2- Deep, Upholstered, Arm Chairs; Pedestal Table, 30 in. dia.; 4- Drawer, Vertical File Cabinet; 4- Shelf, Wood, Bookcase; Double Pedestal Wood Desk; Swivel Chair; and Related Office Furniture, Fixtures and Eq…
904
Consisting of but not necessarily limited to: Co. No. 95014690, C-4313, 95014695, and Others.
906
GRAINGER, CRC, SCOTCH, FLOWSERVE and Others; NOVA Components, PH Sensors, ORP Sensors, Tape and Related, Co. No. 95012583, to Co. No. 95012582; Shelf Location -18B.
907
Consisting of but not necessarily limited to: IQ Pump, WILKERSON Syngas Desiccant, ph Instrument, and Junction Box., Co. No. 9501.
909
Consisting of but not necessarily limited to: WHITE Model MRT15CSEWO, Refrigerator/Freezer, s/n LA62510923; Toaster Oven and Broiler, Electric; GENERAL ELECTRIC Microwave, GEORGE FOREMAN Grill, BLACK & DECKER 2- Slot Toaster.
910
2- 4- Drawer File Cabinets, 2- 6 ft. long Folding Leg Table 10- (approx.) Chairs; 5- Swivel and 3- Folding, Steel. Bookcase.
911
4- Double Pedestal Desks, 2- Wood and 2- Metal; Swivel Chair; 3- 7 ft. tall x 3 ft. wide Wood Bookcases having 5- Shelves Each; 3- Drawer, Metal, Vertical File Cabinet; 3- Straight Side Arm Chairs, 3- Chairs are Swivel; 1- HON 4- Drawer Metal Lateral File…
912
Consisting of but not necessarily limited to: 1- BLUE-POINT, 1- DEGREE, 1832 deg. and 1- 3M CORP. High Temperature, Infrared Thermometers, 1- in a Case.
915
Consisting of but not necessarily limited to: MILWAUKEE Hacksaw Blades; STARRETT Micrometer; 2- Bit Sets; Office In/Out Trays; Safety Glasses.
919
Standard Kit with Dual Transducer, 45 MG, Datalogger SOFTWARE OPTION Capability with Carrying Case.
921
Consisting of but not necessarily limited to: 25 + Electrical 'Lock-Out Board' Pad Locks, TENCARVA TCV-Pump Oil, AEGIS Manual, Hose having Brass and Fittings, GE BIAX T/E Eco42W Lamp, 9- Plastic Bags with Related Parts.
923
Consisting of but not necessarily limited to: 24 in. Guillotine Paper Cutter; 2- SWINGLINE Heavy Duty Staplers; 2- Boxes of Copy Paper, 1- Aspen 30 and 1- Staples; 2- Electric Power Strips; 3- Poster Frames.
927
Consisting of but not necessarily limited to: DODGE and Other Related Parts, Co. No. 95011347 to Co. No. 95011363 and 95011351; in 2- Wood Crate on Pallet.
928
Consisting of but not necessarily limited to: MANCHESTER TANK, 30 gal. Vertical Air Receiver Tank, 1/2 NPT Brass Check Valves and Related; in 5- Boxes on Pallet.
931
Consisting of but not necessarily limited to: Train 1 Fan Parts, Co. No. 95015119, Right Angle Reduction Gearbox and Similar; on Pallet.
934
2 in. ID (approx.) Flanged Screened End Piece for Callidus Unit; DF-200619-401, Co. No. 95011991; in Wood Crate.
936
GUARDIAN Edge Series Retractable Lifelines Safety Harnesses; CAPITAL Protecta Safety Harness for High Work.
937
Consisting of but not necessarily limited to: 1- 4- Tyne Pitch Fork, 1-'Grubbing' Pick Axe, 2- Rakes.
938
Consisting of but not necessarily limited to: Long Handles, Round and 1- Square Point.
939
Consisting of but not necessarily limited to: 4- 30 in. wide (est.) 2- New/Unused, 3- 40 in. wide (est.).
943
4 ft. tall (est.), 300 lb. capacity, Fiberglass.
944
1- LOUISVILLE, 2- Aluminum, 4 ft. Step Ladders and 4- 30 in. Safety Ladders.
968
10 in. dia., Model JBG-10A, s/n 12020175, powered by 1-1/2 hp Electric Motor.
981
To include: KLEEN SWEEP, Rags, Manual, Centrifugal Pump (Less Electric Motor).
996
Powder Actuated Semi-Automatic .27 Caliber, 10 Shot Strip, In Molded Carrying/Storage Case.
1005
To fit Syngas Fans, with Bags containing Carbon Seals.
1007
25 ton capacity, Hydraulically operated, having Manually Operated Hydraulic Power Pack.
1009
Having TOPWORX Indicator, with 2- LMI Metering pumps and SMITH METERING CO. Valve.
1023
With Contents of Steel Pipe Fittings, Threaded, 2 in. dia. To 1/2 in. dia. and smaller; Consisting of but not necessarily limited to: Unions, Tees, Ells, Nipples, Some Extra Heavy.
1028
Each having 4- Drawers with Contents consisting of but not necessarily limited to: TEK, Set, Machine and Similar, Stainless Steel and Carbon Steel.
1029
Contained in a 4- Wheel Trailer; Consisting of but not necessarily limited to: Bolts, Pipe Fittings, and Pressure Regulators; in Buckets, Trays, and Boxes.
1030
For U-Trough Conveyor; Curtain, 1- Box MARTIN SPROCKET AND GEAR INC, Mounting Plate Assembly, Fabric Curtain; With Mobile Frame and Safety Equipment (in Plastic Bag).
1049
New Stubby Antennas, Desktop Microphone, 8- Used Speaker Mics.
1052
Each having 4 to 10 Locks, 21- Rolls of Caution and Danger Site/ Marking Tape.
1064
Calibration and Test Station with QRAEII Gas Meter and Charger.
1066
SCBA (Self Contained Breathing Apparatus) Bag, Regulator, 60 min. Scott Tank, Mask.
1067
SCBA (Self Contained Breathing Apparatus) Bag, Regulator, 60 min. Scott Tank, Mask.
1068
SCBA (Self Contained Breathing Apparatus) Bag, Regulator, 60 min. Scott Tank, Mask.
1069
SCBA (Self Contained Breathing Apparatus) Bag, Regulator, 60 min. Scott Tank, Mask.
1087
Consisting of but not necessarily limited to: SQUIDS Tool Lanyards, 4- SALA Nano-Loks, MILLER Relief Step.
1088
Each with Charging Base; 2- Head Word Battery Powered Work Lights.
1089
Consisting of but not necessarily limited to: GATEWAY SaniFold Vented Respirators; DERMA -LITE PF+ EX, EL Gloves.
1100
Consisting of but not necessarily limited to: Gauze Pads, Plastic Adhesive Strips, Major Wound Compress, Antiseptic Wipes, Extra Large Adhesive Strips, Compression Bandages, DYNAREX Semi-Wrap-Self Adherent, 3M N95 Particulate Respirator and Related.
1104
406 Liters, having 2- Regulators, Rigid and Fabric Carrying Case; Appears New/Unused.
1107
Consisting of but not necessarily limited to: Heavy Duty Paper Punches, Staplers, Tape Dispensers, PENDAFLEX Folders, foot Rest, HON 3- Drawer Lateral File Cabinet, QUARTET Dry Marker board, 4- Boxes D-Ring Binders, Portable Electric Resistance Heater.
1113
With PERKINS ELMER AAS800 Auto Sampler with PERKINS ELMER Power Supply and Cooling System.
1118
72", With Built-in Exhaust Blower and Vapor Proof Light. (NOTE: Cabinet Only, Roof-Top Vent is NOT Included.)
1119
24 gal. Capacity. With ACID STORAGE CABINET Metal, under Counter.
1121
Gas Chromatograph, Multi-Gas #1 Configuration, with 1- Box of Supplies and Accessories, 1- DELL Monitor, Keyboard and Mouse; Set-up for HCN Testing.
1126
Autosampler utilizes XOS Accu-Cell Cup; With 1- Tray containing Manuals, Rolls of Strip Paper and Printer.
1128
With 3- ELGA Standard Cartridges, 1- ELGA D1 Cartridge, 2- Boxes of Pre-Treatment.
1130
With Pure Lab Flex Dispenser, Model 815LX s/n 0S01BPM1, with 1- Tray of Manuals and Fittings, DV35 Docking Vessel, Mfg. 1/26/2012.
1133
Consisting of but not necessarily limited to: 2- Bags of Pipettes, and Rubber Squeeze Bulbs.
1134
Consisting of but not necessarily limited to: Flask, Cylinders, Beakers, Centrifuge Tubes, and Gloves.
1152
Consisting of CHEMETRICS, V2000, Multi-Analyte Photometer; 1- FISHER SCIENTIFIC Accumet, AP110, Portable pH Meter Kit; 1- NALCO Model 8000-000 Hand Held Fluorometer and 1- MYRON L COMPANY Ultrameter Free Chlorine Tester.
1155
Consisting of but not necessarily limited to: Pipettes and Consumables.
1158
Consisting of 1- TITRETTE 25 ml Class A Precision, 1- EPPENDORF Varispenser with Manuals.
1160
Having Model 803 T-Stand; 1- Tray NEO'S Strip Printer, Manuals, Cables and Related.
1168
To Include but not necessarily limited to: Blocks, Crucibles, Weight Baths, Needles, Glass Syringes, Glass Bottles, Plastic Bottles.
1171
With METROHM SAMPLE PROCESSOR: 858 With METROHM Model 772 Pump Unit. With LOT 4- TRAYS METROHM PARTS AND SUPPLIES: 772 Manual, Parts, Supplies, and Consumables. With DELL MONITOR, KEYBOARD AND MOUSE.
1176
Consisting of but not necessarily limited to: 1- Step Stool, 1- Tray of Tape, Signs, and Related.
1177
Adjustable Height with Foot Rings, Dry Marker Board, Lab Coats, Aprons, Rain Gear.
1181
Windows Pro 7, Hard Drives Erased. Service Tags: JPFY3VI; 3NZQIRI, AND JPJV3VI.
1196
Consisting of 4- CISCO 10/100 TX Rack Mounted Network Units, C3KX-NM-1G; 2- CISCO Air-Lap Dual Band Access Points.
1197
With 3- Smart Link Micro Analog Telephone Adapters and other Computer Related Items; Hardware Only.
1198
Consisting of but not necessarily limited to: 1- Desk with Corner Unit and 2- Drawer Pedestals, 1- Bookcase and 1- Dry Marker Board.
1199
3- Storage Tubs, Consisting of but not necessarily limited to: Cabling, 6- (approx.) APC and others Power Surge Strips and Related.
1203
AMS Suite Intelligent Device Manager. With LOT 4- DELL TOWER CASE COMPUTERS: Precision T3500 Consisting of but not necessarily limited to: DELL Precision T3500 Tower Case Computers, 8- DELL 21 in. Monitors, 1- WESTINGHOUSE, 1- ACER and 1- INSIGNIA Monitor…
1204
Consisting of but not necessarily limited to: 2- Drawer Letter Vertical File Cabinet, STAPLES 2- Drawer Lateral File Cabinet.
1205
WEINTEK with EZ Ware HMI 5000 and 1- ALLEN BRADLEY PanelView Plus 1250 HMI.
1206
Certified T-Mobile Preowned, 7 in. WSVGA, LCD 1.7 ghz, Dual Core CPU. (NOTE: One Says Broken.)
1209
1 in. Diaphragm Pump, Bolt Cutter, 3- Lock Boxes, Perkins Parts and Others.
1210
Consisting of but not necessarily limited to: 5- Drawer Lateral File Cabinet, 2- Cork Boards, 1- Dry Marker Board, 1- Steel Storage Shelf Unit.
1217
Consisting of but not necessarily limited to: 13 in. x 13 in. (approx.) Guillotine Paper Cutter, Heavy Duty, 3- Hole Paper Punch, 2-2- Hole Paper Punches, 2- Staplers and Related.
1218
Contents of 2- Cabinets, Wall Mounted and 1- Under Counter, Consisting of but not necessarily limited to: Reams of Copy Paper, Binders, Stamp with Pads, Staples Paper Clips, and Similar.
1224
Stainless Steel, 24 in. x 24 in. x 36 in. tall, (est.), having Foot Operated, Hinged Top Lid.
1225
Stainless Steel, Portable, mounted on 4- Castering Wheels.
1227
Consisting of but not necessarily limited to: 4- 48 in. dia. (est.) Single Pedestal Tables; 12- (approx.) Stacking Straight Chairs.
1228
Consisting of but not necessarily limited to: 12 ft. long Wood Conference Table having Semi-Circular Ends; 8- Swivel Chairs, Each Without Arms.
1239
Consisting of but not necessarily limited to: 2- Double Pedestal Wood Desk, each having Front Overhang, 36 in wide x 72 in. long, (approx.) Equipment/Storage Cabinet, Wood, Bookcase/File Drawer, Wood, 1- Shelf.
1240
Dual Compartment Safe, Each Compartment having Digital Combination Locks, Top Money Deposit Drop, with Cash Box with Lock having 6- Coin and 4- Bill Trays having Spring Loaded Hold-Down Arms, Cash Bags; with FIRST DATA Model FD200 Credit Card and Check Re…
1241
Consisting of but not necessarily limited to: 1- 270 deg. Desk Unit having Large Radius 90 deg. Piece, 1- 90 deg. Desk having 2- 2- Drawer Pedestals, 5- Drawer Lateral File cabinet, 1- Wood Bookcase, Posture Chair, Swivel.
1242
Consisting of but not necessarily limited to: 45 deg. Main Desk having 24 in. wide (approx.) Top Shelf, File Pedestals / Cabinets; 18 in. wide Banquet Table; Posture Chair, Swivel, Arm.
1243
Consisting of but not necessarily limited to: 1- 5- Drawer, Locking, 1- 4- Drawer, Locking.
1244
Consisting of but not necessarily limited to: 4- Side Arm Chairs, Wood, Upholstered, Straight; 1- Table, Wood, Side.
1245
Consisting of but not necessarily limited to: 1- ACER Flat Screen Monitor, 1- DELL Flat Screen Monitor, 2- Monitor Elevation Platforms, 1- Docking Station.
1246
With 4- Related HID Boxes including Printer Cartridges, Badges and Clips; Wire Metal In/Out Tray.
1247
Consisting of but not necessarily limited to: Laminating Sheets, Scale, Desk Organizer, Tape Dispenser.
1251
8- 6 ft. tall Partitions, Each having Frosted Glass Top Panel, 3- Full Length, 5- 1/2 Length; 4- Work Desks, each having 2- 2- Drawer Pedestals.
1252
Consisting of but not necessarily limited to: 1- Docking Station; Monitor, Flat Screen; Key Board and Mouse.
1253
Consisting of but not necessarily limited to: 1- Docking Station; Monitor, Flat Screen; Key Board and Mouse.
1255
Consisting of but not necessarily limited to: 7- Hard Hats, 7- Safety Glasses, Box of HOWARD LEIGHT Pilot Hearing Protectors.
1262
Consisting of but not necessarily limited to: 12- (approx.) 1/2 Height Partition Dividers, 6- (approx.) Work Centers, Each Center having 45 deg. Desk Top, 2- 2- Drawer File Pedestals, Locking, Cantilevered, Shelf and Organizer Trays and Similar Items.
1267
Consisting of but not necessarily limited to: 8 ft. long (approx.) Wood Conference Table; 7- Posture Chairs, Swivel, Without Arms.
1268
Consisting of but not necessarily limited to: 6- (approx.)1/2 Length and Full Height, and 8 (approx.) 1/2 Length and 1/2 Height Partition Dividers; 7- (approx.) Work Desk Areas, with 2- Drawer File Pedestals, Cantilevered Trays /Shelves; 5- Posture Chairs…
1276
Consisting of but not necessarily limited to: 33- (approx.) Keyboards and 14- (approx.) Docking Stations.
1286
Consisting of but not necessarily limited to: 2- pair (4- Boots) LACROSSE Rubber Boots, 5- Pair (approx.) Rubber 'Pull-Over' Over Shoes, 1- Plastic Storage Tub.
1288
8- Sections, 3- Free Standing, Full Height, Steel, having 2- Personal Lockers, Steel.
1300
Consisting of but not necessarily limited to: 500 ft. (est.) total combined Linear Length, Electrical Power Distribution, instrumentation and Communication; Aluminum, Cable Trays, 2- Level 'Box Type' Bridge, Supported 25 ft. (approx.) above Grade using 12…
1301
Consisting of but not necessarily limited to: 60 ft. high x 125 ft. wide x 125 ft. long (est.), Main Work Level having 4- Step-Down Access Levels; Modular Construction from Steel H and I Beams, Solid and Bar Grating Decking, Multiple Access /Regress Stair…
1302
Consisting of but not necessarily limited to: 60 ft. high x 125 ft. wide x 125 ft. long (est.), Main Work Level having 4- Step-Down Access Levels; Modular Construction from Steel H and I Beams, Solid and Bar Grating Decking, Multiple Access /Regress Stair…
1303
Consisting of but not necessarily limited to: 25 ft. high x 6 ft. wide x 8 ft. deep (est.) having 2- Work/Maintenance Levels, Stairway having 3- Intermediate Platforms, with OSHA Compliant Safety Railings. (NOTE: No Equipment or Other Assets which are Lot…
1304
Consisting of but not necessarily limited to: 4 Cell Tower, 65 ft. tall x 40 ft. wide x 40 ft. deep (est.) having 3- Work/Maintenance Levels, Stairways, and Ladders with OSHA Compliant Safety Railings, Explosion Proof Light Fixtures Solid and Bar Grating …
1305
Consisting of but not necessarily limited to: 1- 3- Bay Section, 40 ft. long x 22 ft. high (est.) 2- Level Box Type with Aluminum Electrical Power Distribution Tray. (Note: Apparently, No Wiring is Installed.) (Note: No Equipment or Other Assets which are…
1306
Consisting of but not necessarily limited to: 450 ft. long x 30 ft. high x 18 ft. wide (est.) Safety Valves and Pressure Control Valves and Vents for High and Pressure Steam Lines, Knock-Out Vessel Structure, 2- Levels Above Ground (average) with Sections…
1307
Consisting of but not necessarily limited to: 80 ft. long x 20 ft. tall x 6 ft. wide (est.) 2- Levels, Constructed H and I Beam Carbon Steel, Explosion Proof Light Fixtures. (NOTE: No Equipment or Other Assets which are Lotted or Described elsewhere in th…
1308
Consisting of but not necessarily limited to: 40 ft. tall x 40 ft. long x 20 ft. wide (est.) 3- Levels, Constructed of H and I Beam Carbon Steel, solid and Bar Grating Work/Maintenance Decks, Stairways and Ladders having OSHA Compliant Hand Safety Railing…
1309
Consisting of but not necessarily limited to: Ethanol and Related Liquid Material Shipping and Receiving Piping supported Overhead by T- Post, 10 ft. tall (est.) with 4 in. dia. and smaller Stainless Steel and Carbon Steel Lines, Aluminum Electrical Power…
1310
Stainless Steel Basin, having Hinged Cover for Basin Shower Valve with Foot Lever Pull Chain.