1-23135
Parcel 1: 325.47 ACRES MAIN PLANT SITE AND DESIGNATED EQUIPMENT LOTS
CONSISTING OF BUT NOT LIMITED TO: 325.47 Acre Main Plant Site with Lot Numbers: 15-44, 100-262. Geocode: 27-3444-34-1-01-01-0000, Legal Description: S34, T23 N, R59 E, E2SW, SE4. Zoned: Industrial Real Property
2-23135
Parcel 2: 104 ACRES MAIN PLANT WATER DISCHARGE LAGOON
CONSISTING OF BUT NOT LIMITED TO: 104 Acres Located Along the Yellowstone River to the North of Parcel 3. Geocode: 27-34444-25-3-03-01-0000, Legal Description: S25, T23 N, R59 E, -Lot 5 West of River Accrued Land W of River Rd. Zoned: Non-Qualified Ag
4-23135
Parcel 4: 30.529 ACRES GRAZING/HUNTING/RECREATIONAL LAND
CONSISTING OF BUT NOT LIMITED TO: 30.529 Acres Located Adjacent the Yellowstone River to the East of Parcel 5. Geocode: 27-3444-36-3-01-01-0000, Legal Description: S36, T23 N. R59 E. C.O.S. 27-612. Parcel C. Zoned: Agricultural and Timber Properties
5-23135
Parcel 5: 240 ACRES IRRIGATED TILLABLE FARMLAND WITH IRRIGATION EQUIPMENT OWNED BY SSI
CONSISTING OF BUT NOT LIMITED TO: 240 Acres Located to the West of Parcel 4. Geocode: 27-3444-35-3-01-01-0000. Legal Description: S35, T23 N. R59 E. E2SW, SE4. Zoned: Agricultural and Timber Properties
6-23135
DIFFUSER AND COSSETTE MIXER
CONSISTING OF BUT NOT LIMITED TO: 1998; 8000 Tons Per Day Thru Put; Diffuser is Approx. 85'H x 26' Diameter, Tower Rests on Single Roller Bearing and Rotates 0.17 to 0.22 RPMs, Internal Rotating Flight Arms, Screens, Bullgear - Approx. 2'W x Approx. 19' Diameter, (414) Teeth, Segmented Gear with (18) Equal Segments (New Segmented Bullgear was Insta
7-23135
PULP PRESS
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Nelson Variable Speed Drive, Press #1. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
8-23135
PULP PRESS
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Allen-Bradley Drive, Press #2. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
9-23135
PULP PRESS TWIN SCREW
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Allen-Bradley Drive, Press #3. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
10-23135
PULP PRESS TWIN SCREW
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Nelson Drive, Press #5. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
11-23135
PULP PRESS TWIN SCREW
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Nelson Drive, Press #6. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
12-23135
PULP PRESS TWIN SCREW
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Nelson Drive, Press #7. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
13-23135
PULP PRESS TWIN SCREW
CONSISTING OF BUT NOT LIMITED TO: 1984; Twin Stainless Steel Augers, Approx. 20'L, 150-HP Motor, Pulp Chute, Stainless Covers (Covers are Disassembled and Stored Outside), Press #8. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
14-23135
DRIVE UNIT FOR TWIN SCREW PULP PRESS
2021 Screw Press Drive, 24985:1 Gear Ratio; 190L Oil Quantity. NOTE: Drive Unit Only-Does Not Include Pulp Press. NOTE: Buyer of Tract 1 to have first right of refusal to match the high bid plus 10% at the end of the online auction.
15-23135
MAIN BUILDING FIRST OFFICE
CONSISTING OF BUT NOT LIMITED TO: 60" Diameter Wood Grain Laminate Top Table; 36"x 60" Metal Desk with Wood Grain Laminate Top and Drawers; 29" x 59" Wood Grain Laminate Top with Drawers; 5-Roller Base Office Chair, Mesh Back, Arm Rests; (4) Padded Side Chairs, Sled Base, Arm Rests; (2) Metal 4-Drawer Filing Cabinets; Wood Bookcase with (3) Shelves
16-23135
MAIN BUILDING RECEPTIONIST OFFICE
CONSISTING OF BUT NOT LIMITED TO: 69" x 65" L-Shaped Wood Desk; (3) Padded Sided Chairs, 4-legs; (4) Metal 4-Drawer Filing Cabinets; 16" x 24" Wood Printer Cabinet with (2) Doors; Fellows 99ci Shredder; Avaya 9508 Handset
17-23135
MAIN BUILDING MAIN LEVEL GROUP OFFICE
CONSISTING OF BUT NOT LIMITED TO: (3) 30" x 60" Metal Desks with Drawers; 33" x 59" Metal Desk with Drawers; 47.5" Diameter Wood Grain Laminate Top Table; (3) Padded 5-Roller Base Office Chairs; (2) Padded 5-Roller Base Office Chairs, Arm Rests; 5-Roller Base Office Chair with Mesh Back, Arm Rests; (4) Metal 4-Drawer Filing Cabinets; Metal Bookcase
18-23135
MAIN BUILDING OFFICE 2
CONSISTING OF BUT NOT LIMITED TO: 60" x 60" (est./approx.) Wood Grain Laminate L-Shaped Desk with Desk Shelf; 5-Roller Base Office Chair with Mesh Back, Arm Rests; Desk Lamp; Paper Organizer; Plastic Waste Receptacle; Printing Calculator; Avaya 9508 Handset
19-23135
MAIN BUILDING VAULT STORAGE
CONSISTING OF BUT NOT LIMITED TO: (3) Metal 4-Drawer Filing Cabinets and Contents; 2-Step Ladder; (5) 3'W x 18"D x 7'T Metal Shelving Units with Various Office Supplies and Cleaning Supplies
20-23135
MAIN BUILDING OFFICE 3
CONSISTING OF BUT NOT LIMITED TO: 65" x 69" Wood Grain Laminate L-Shaped Desk; Zeal Desk Standing Desk Platform; Wood 2-Drawer Lateral Filing Cabinet; 5-Roller Base Office Chair with Mesh Back, Arm Rests; Sharp Printing Calculator;
21-23135
MAIN BUILDING MAIN LEVEL HALLWAY
CONSISTING OF BUT NOT LIMITED TO: 60"W x 20"D Wood Grain Laminate Top 4-Leg Table; 30" x 60" Metal Desk with Metal Desk Shelf; 25"W x 52"L Wood Grain Laminate Desk; 12"D x 13"W x 71"T 4-Shelf Wood Bookcase; (3) 4-Position 5-Gallon Water Jug Holders; Hasler In-300 Series USPS Shipping Label Scale; Fellowes 225i Shredder; Konica Minolta Bizhub C364e
22-23135
MAIN BUILDING MAIN LEVEL BREAK ROOM
CONSISTING OF BUT NOT LIMITED TO: 60" Diameter Wood Grain Laminate Top Table, Padded 5-Roller Base Office Chair; Padded Side Chair, Arm Rests, 4-Legs; Hot Point 4-Burner Electric Stove/Oven; (3) Microwaves; GE Over/Under Full Size Refrigerator/Freezer
23-23135
MAIN BUILDING MAIN LEVEL SERVER ROOM
CONSISTING OF BUT NOT LIMITED TO: Ulrich Plan Filing Cabinet, 31"L x 43"W x 31"D, on Casters, and Contents; Wooden Printer Stand on Casters; Wood Bookcase, 2-Shelves, on Casters; (2) 3'W x 18"D x 7'T Metal Shelving Units; 2003 Compaq 10K 24"W x 36"D x 77"T Server Cabinet, 2-Doors, 42-Positions, APC SmartUps 5000 Battery Backup Unit; APC Back-Ups 15
24-23135
MAIN BUILDING FILE ROOM
CONSISTING OF BUT NOT LIMITED TO: (4) Metal 4-Drawer Filing Cabinets; 3'W x 18"D x 7'T Metal Shelving Unit with Copy Paper; (2) Plastic Filing Cabinets; (3) Vacuums
25-23135
MAIN BUILDING MAIN LEVEL CORNER OFFICE
CONSISTING OF BUT NOT LIMITED TO: 72" x 65" Wood Grain Laminate L-Shaped Desk; Zeal Desk Standing Desk Platform; (2) 12"D x 13"W x 71"T 4-Shelf Wood Bookcases; Wood Podium with (2) Shelves, Pull Out Drawer, on Casters; Metal 2-Drawer Lateral Filing Cabinet; Metal 5-Drawer Lateral Filing Cabinet; (13) Padded Metal Side Chairs, Sled Base
26-23135
MAIN BUILDING CONFERENCE ROOM
CONSISTING OF BUT NOT LIMITED TO: 17.5"W x 72"L Metal Table with Wood Grain Laminate Top; 24"W x 8'L Hardwood Countertop on 4-Door Cabinet; (3) 30" x 60" Molded Top Folding Tables; (2) 6'T 2-Door Wood Cabinets with Personal Safety Equipment; (2) 6'T Step-Ladders; Padded 5-Roller Base Office Chair; 5-Roller Base Office Chair with Mesh Back, Arm Rest
27-23135
MAIN BUILDING OFFICE 4 WITH CONNECTED NURSES ROOM
CONSISTING OF BUT NOT LIMITED TO: 27.5" x 65" L-Shaped Wood Grain Laminate Desk; 18.5" x 65" Wood Grain Laminate Hutch with Desk Shelf; Metal 4-Drawer Lateral Filing Cabinet; Padded 5-Roller Base Office Chair; Avaya 9508 Handset; Plastic Waste Receptacle
30-23135
MAIN BUILDING 2ND FLOOR LANDING
CONSISTING OF BUT NOT LIMITED TO: Bunn VP.17-2 Coffee Maker, (3) Carafes; 20.5" x 20.5" Wooden Side Table, Drawer; (2) Padded Side Chairs, 4-legs
31-23135
MAIN BUILDING SECOND FLOOR OFFICE 1
CONSISTING OF BUT NOT LIMITED TO: 71" x 63" L-Shaped Desk, (3) Metal 4-Drawer Filing Cabinets; Leather Executive Office Chair; 5-Roller Base Office Chair, Mesh Back, Arm Rests; Canon C350iF Printer; Avaya Handset
32-23135
MAIN BUILDING SECOND FLOOR SUPERVISORS OFFICES
CONSISTING OF BUT NOT LIMITED TO: (7) Built-In Office Stations; (7) Metal 2-Drawer Filing Cabinets; Metal 4-Drawer Lateral Filing Cabinet; (7) Leather Executive Office Chairs; Avaya Handset
33-23135
MAIN BUILDING SECOND FLOOR OFFICE 2
CONSISTING OF BUT NOT LIMITED TO: Metal Cubical Style Desk, Drawer Pedestal; 5-Roller Base Office Chair, Mesh Back, Arm Rests; (2) Metal 4-Drawer Filing Cabinets
34-23135
MAIN BUILDING SECOND FLOOR OFFICE 3
CONSISTING OF BUT NOT LIMITED TO: (3) 33.5" x 59" Metal Desks with Drawers; (4) 4-Drawer Metal Filing Cabinet; 2-Drawer Metal Filing Cabinet; Metal 4-Drawer Lateral Filing Cabinet; Coat Rack; (2) Leather Executive Office Chairs; Metal 5-Shelf Unit and Contents; HP Envy 5660 All In One Printer; (2) Avaya Handsets; Labeltac4 Label Maker
35-23135
MAIN BUILDING SECOND FLOOR COPY HALLWAY
CONSISTING OF BUT NOT LIMITED TO: 19.5" x 59.5" Metal Table; Stand Up Portable Desk; 6'T 2-Drawer Metal Cabinet; (2) Metal 5-Drawer Lateral Filing Cabinets; 14"D x 36"W x 48"T Wood Cabinet, 2-Doors; Wood 2-Drawer Lateral Filing Cabinet; Padded 5-Roller Base Office Chair; Fellowes 225i Shredder; Konica Minolta Bizhub C360i Color Multifunctional Prin
36-23135
MAIN BUILDING SECOND FLOOR CORNER OFFICE
CONSISTING OF BUT NOT LIMITED TO: Wooden 99" x 42" Oval Conference Table; 36" x 72" Wood Desk with Drawers; (3) Metal 2-Drawer Lateral Filing Cabinets; (5) Leather Executive Office Chairs; HP LaserJet Pro MFP M479fdw All In One Printer; Avaya Handset; Costway Water Dispenser
37-23135
MAIN BUILDING SECOND FLOOR OFFICE 4
CONSISTING OF BUT NOT LIMITED TO: 33.5" x 59" Metal Desk with Drawers; 29" x 59" Metal Desk with Drawers; 30" x 60" Metal Desk with Drawers; (2) Metal 2-Door Filing Cabinets; Metal Shelves on Top of 2-Door Cabinet; Metal 2-Door Cabinet on Top of Metal Drawer; Metal 5-Drawer Lateral Filing Cabinet; (2) 5-Roller Base Office Chair, Mesh Back, Arm Rest
38-23135
MAIN BUILDING SECOND FLOOR RECEPTION
CONSISTING OF BUT NOT LIMITED TO: 36" x 60" Wood Desk with Drawers; 30" x 72" Metal Desk with Drawers; (4) Metal 4-Drawer Filing cabinets; (2) Metal 2-Drawer Filing Cabinets; (2) Metal 4-Drawer Lateral Filing Cabinets; ALL STEEL Metal Cabinet with 18-Drawers and Top Glass Display case; 6'T Wood Grain Laminate 2-Door Cabinet, and Contents; Wood 25"W
39-23135
MAIN BUILDING SECOND FLOOR OFFICE
CONSISTING OF BUT NOT LIMITED TO: Wood 66" x 72" L-Shaped Desk; 59" Diameter Wood Grain Laminate Table; Metal 4-Drawer Filing Cabinet; Metal Bookcase; Wood Cabinet; Metal Coat Rack; Leather Executive Office Chair; (2) Sled Base Padded Side Chairs, Arm Rests; (2) 24" Monitors; Avaya Handset
40-23135
MAIN BUILDING SECOND FLOOR LAB BREAK ROOM
CONSISTING OF BUT NOT LIMITED TO: 30" x 48" Metal Desk with Drawers; 47.5" Diameter Wood Grain Laminate Top Table; (4) Wall Mounted Lockers; "n" Shaped Set of (16) Lockers; Metal 4-Drawer Lateral Filing Cabinet; (2) 5-Roller Base Office Chairs, Mesh Back, Arm Rests; Lether Executive Office Chair; Padded 5-Roller Base Office Chair; Padded Metal Lab
41-23135
MAIN BUILDING SECOND FLOOR LAB AND CHEMICAL STORAGE ROOM
CONSISTING OF BUT NOT LIMITED TO: Built-In Lab Table with (4) Sinks, Backsplash; 36.5"W x 25"D x 84" Metal Shelving Unit, (5) Shelves; Metal 2-Door Cabinet, 36" x 78"T; 6'T Metal 2-Door Cabinet, on Feet; 35"W x 28"T x 24"D 2-Door Cabinet on Stand; (12) Plastic 3-Drawer Carts; 4'T Step Ladder; 3-Step Metal Stock Ladder; Haven & Boecker Tyler RX-
42-23135
MAIN BUILDING SECOND FLOOR HALLWAY TO PLANT
CONSISTING OF BUT NOT LIMITED TO: 30" x 60" Metal Desk, Undershelf; Metal 2-Door Cabinet, (est.) 36"W x 64"T; Metal 4-Drawer Lateral Filing Cabinet; 5'T IBM Server Cabinet; Padded 5-Roller Base Office Chair, Mesh Back; Pelonis A/C Unit; HP DeskJet 1112 Printer; (3) Samsung 24" Monitors; (2) Wired Keyboards, Mouse
43-23135
MAIN BUILDING SECOND FLOOR SHIFT SUPERVISORS OFFICE
CONSISTING OF BUT NOT LIMITED TO: (3) 30" x 60" Metal Tables; (3) Metal 4-Drawer Filing Cabinets; Metal 2-Drawer Filing Cabinet; "n" Shaped Set of (16) Lockers; 5-Roller Base Office Chair, Mesh Back, Arm Rests; (6) 5-Roller Base Office Chairs; (2) Microwaves; Avaya Handset
44-23135
MAIN BUILDING BASEMENT
CONSISTING OF BUT NOT LIMITED TO: Wooden Tables, Miscellaneous Filing Cabinets and Contents; Building Blueprint Plans; Used Computer Equipment; Shelving and Sections of Pallet Racking
50-23135
MAN CAMP 42-PERSON MODULAR HOUSING UNIT-6 SECTIONS
2004 Sectional Sleeping Quarters with Washroom and Laundry Room; Quantity of (4) 12'W x 60'L Sleeping Quarters, Each Containing (7) 80.5"W x 11'L rooms, (1) L-Shaped room 7'L x 109"W and 50"L x 70"W. Each Bedroom Contains Electric Baseboard Heat, Twin Bed Frame, Mattress, Dresser, Nightstand, Wall Mirror, (3) Wall Hooks, and Wall Mounted Lamp. (1)
51-23135
DUMP TRUCK
1997, Day Cab, Tandem Axle with 1 Air Lift, 212" Wheel Base, Cummins M11+ Diesel Engine, Allison HD4560P Automatic Transmission, Cruise Control, Heated Mirrors, PTO, Dual Rear Wheels; 16' Red River Live Bottom Body; Cracked Windshield, NOTE: Reportedly Does Not Run, Unknown Mileage
52-23135
DUMP TRUCK
1997, Day Cab, Tandem Axle, 212" Wheel Base, Cummins M11+ Diesel Engine, Allison HD4560P Automatic Transmission, Cruise Control, Heated Mirrors, PTO, Dual Rear Wheels; 16' Red River Live Bottom Body; NOTE: Reportedly Does Not Run, Unknown Mileage
53-23135
DUMP TRUCK
1997, Day Cab, Tandem Axle, 194" Wheel Base, Cummins M11+ Diesel Engine, Allison HD4560P Automatic Transmission, Cruise Control, Heated Mirrors, Engine Brake, PTO, Dual Rear Wheels, 16,000# Front Axle, 40,000# Rear Axles; Scelzi Enterprise VDU 16'L Steel Dump Body, SN: 10964345, 3'H Sides, Rear Dump, NOTE: Unknown Mileage, Differential Out
54-23135
WATER TRUCK
1975, Day Cab, Single Axle with Dual Rear Wheels, 174" Wheel Base, Ford 389 Gas Engine, Automatic Transmission, Spring Suspension, 27,500# GVWR; 1975 Etnyer (est.) 1500-2000 Gallon Tank, SN: L-1532, 35801 Metered Miles; No Title
55-23135
DUMP TRUCK
1997, Day Cab, Tandem Axle, 194" Wheel Base, Cummins M11+ Diesel Engine, Allison HD4560P Automatic Transmission, Cruise Control, Heated Mirrors, Engine Brake, PTO, Dual Rear Wheels, 16,000# Front Axle, 40,000# Rear Axles; Scelzi Enterprise VDU 16'L Steel Dump Body, SN: 07964190, 3'H Sides, Rear Dump, 000909 Metered Miles
56-23135
DUMP TRUCK
1997, Day Cab, Tandem Axle, 194" Wheel Base, Cummins M11+ Diesel Engine, Allison HD4560P Automatic Transmission, Cruise Control, Heated Mirrors, Engine Brake, PTO, Dual Rear Wheels, 16,000# Front Axle, 40,000# Rear Axles; Scelzi Enterprise VDU 16'L Steel Dump Body, SN: 09964266, 3'H Sides, Rear Dump, 123,339 Miles
57-23135
MECHANIC TRUCK
1987, Day Cab, Single Axle, Dual Rear Wheels, 6.0L Gas Engine, 5+2 Manual Transmission; (8) Compartment Mechanic Body, Liftmore 6036 WX20 Crane, SN: M279W33, 6,000# Capacity, 20' Reach; Air Compressor, Piston Type, Horizontal Tank Mounted, Kohler Gas Engine, 215,661 Miles
58-23135
2011 WHEEL LOADER WITH BUCKET, 6' FORKS AND SNOW PUSHER BLADE
EROPS, Articulated, 163-HP Diesel Engine, Quick Coupler, JRB 8.5'W Bucket with BOCE, Deestone 20.5R25 Tires, Push Button Start, 24,348 Hours; John Deere 60 Forks, SN: WG85325, 6'L Forks, Quick Coupler; Heavy Duty Snow Pusher Blade, 12'W, Swivels, Quick Coupler
59-23135
2011 WHEEL LOADER WITH BUCKET AND 6' FORKS
EROPS, Articulated, 163-HP Diesel Engine, Quick Coupler, 8.5'W General Purpose Bucket with BOCE, Advance 20.5-25 Tires, 40,647 Hours; 6' Forks; NOTE: Has Hydraulic Issues
60-23135
1997 WHEEL LOADER
EROPS with Cage over Windshield, Articulated, Cummins M11 264-HP Diesel Engine, 134.5"W x 72"T General Purpose Bucket, Cracked Windshield
61-23135
2006 WHEEL LOADER
EROPS, Articulated, 169-HP Diesel Engine, Quick Coupler, Hercules 20.5-25L3 Tires; 98.5" General Purpose Bucket with BOCE; Pusher Bar (Broken); NOTE: Unknown Hours, No Transmission, No Battery
62-23135
2003 WHEEL LOADER
EROPS, Articulated, 165-HP Diesel Engine, Quick Coupler, 102"W General Purpose Bucket with BOCE, 15,443 Hours, NOTE: Electrical Problem
63-23135
2002 CRAWLER TRACTOR BULLDOZER WITH 2006 RIPPER
EROPS, Air/Heat, 153-HP Diesel Engine, Engine Side Shields, Rear Window Screen, Heavy Duty Grill, Fuel Tank and Bottom Guarding, 34"W High Track, 12'W 6-Way Blade, Ripper Valve & Control, Average Undercarriage, 11,920 Hours; 2006 Diamond Manufacturing Inc. Ripper D6M Ripper, SN:70D060175, 3-Shanks, 34"
64-23135
1999 FORKLIFT TRUCK
LP Gas, 189" Max Lift Height, 2450# Max Lift Capacity, 3-Stage Mast, Side Shifter, Solid Pneumatic Tires, Overhead Guard
65-23135
2007 FORKLIFT TRUCK
LP Gas, 189" Max Lift Height, 3750# Max Lift Capacity, 6 deg. Tilt-Back, 3-Stage Mast, Side Shifter, Cushion Pneumatic Tires, Overhead Guard, 48" Forks; 45"W Box Turner
66-23135
2008* FORKLIFT TRUCK
LP Gas, 177" Max Lift Height, 4050# Max Lift Capacity, 3-Stage Mast, Pneumatic Tires, Overhead Guard. NOTE: Believed to be 2008 But Not Guaranteed.
67-23135
1997 FORKLIFT TRUCK
LP Gas, 189" Max Lift Height, 4800# Max Lift Capacity, 6 deg. Tilt-Back, 3-Stage Mast, Side Shifter, Pneumatic Tires, Overhead Guard, 41" Forks
68-23135
2008* FORKLIFT TRUCK
LP Gas, 189" Max Lift Height, 4050# Max Lift Capacity, 6 deg. Tilt-Back, 3-Stage Mast, Side Shifter, Solid Pneumatic Tires, Overhead Guard, 48" Forks, NOTE: 88888.8 Metered Hours with Error Message, Believed to be 2008 But Not Guaranteed.
69-23135
GOOSENECK TRAILER
2001, Tandem Axle, Single Rear Wheels, 14,000# GVWR, 20'L Deck, 4' Beavertail, Fold Down Ramps, Ground Bearing, Modified Welded Steps Covering Ramp/Beavertail, Stake Pockets, Chain Rail
71-23135
FLATBED TRUCK
2001, Standard Cab, 4x4, PS V8 Diesel Engine, Manual Transmission, A/C, Towing Package, Dual Rear Wheels; 9' Flatbed with Headache Rack, Fuel Tank, Tuthill 15-GPM Pump, 129,348 Miles
72-23135
WELDING TRUCK
1980, Standard Cab, Manual Transmission, Gas Engine, Single Rear Wheels, (est.) 8' Flatbed, 500# Crane, Columbian S6 Vise; Miller Bobcat 250 CC/CV/AC/DC Welder, 10,000-Watt Generator, SN: LB41???, Wire/Tig, Torch, Leads, Oxygen Tanks, Unknown Miles
73-23135
FLATBED TRUCK
1994, Standard Cab, Manual Transmission, Diesel Engine, A/C; Cadet Steel Flatbed with Headache Rack, 11'L, 5th Wheel Kingpin, Stake Pockets, Chain Rail, Towing Package, Dual Rear Wheels; 87,073 Miles
74-23135
PICKUP TRUCK
2004, Extended Cab, 4x4, Automatic Transmission, 5.3L Gas Engine, A/C, Cruise Control, Power Locks and Windows, 6.5' Bed, Bed Liner, Towing Package, Grill, 132,388 Miles, Cracked Windshield
75-23135
PICKUP TRUCK
1997, Standard Cab, Automatic Transmission, Gas Engine, A/C, 8' Bed, 150,454 Miles
76-23135
PICKUP TRUCK
2006, Extended Cab, 4x4, Automatic Transmission, Gas Engine, Power Locks and Windows, 6.5' Bed, Bed Liner, Towing Package, Grill, NOTE: Driver Door Doesn't Open, 110,265 Miles
77-23135
PICKUP TRUCK
2004, Extended Cab, 4x4, Automatic Transmission, 5.3L Gas Engine, A/C, Cruise Control, Power Locks and Windows, 6.5' Bed, Bed Liner, Towing Package, Grill, Unknown Miles, Cracked Windshield, NOTE: Modified to Push Start Ignition
78-23135
PICKUP TRUCK
1999, Extended Cab, 4x4, Automatic Transmission, V8 Magnum Gas Engine, Cruise Control, Manual Windows, 6.5' Bed, Towing Package, Grill, 190,490 Miles
79-23135
PICKUP TRUCK
2011, Pickup Truck, Extended Cab, 4x4, Automatic Transmission, 5.3L V8 Gas Engine, A/C, Cruise Control, Power Locks and Windows, BlueTooth, Work Light, 6.5' Bed, Bed Liner, Towing Package, No Tailgate; 135,000 Indicated Odometer Miles (MILES SUBJECT TO CHANGE DUE TO VEHICLE STILL BEING IN USE AT THE SITE);NOTE: Vehicle Runs/Drives but has Multiple
80-23135
RADIAL STACKING CONVEYOR
1990, Approximately 10'L x 6'W x 5'D Hopper, 36" Rubber Belt, 125'L Truss Type Frame with Fold Up end, 50-hp Baldor Motor, Tandem Axle Carrier
81-23135
SOIL SAMPLING SYSTEM TRAILER MOUNTED
1982 Hydraulic Soil Sampling, Coring and Drilling Machine, Mounted on Single Axle Trailer
100-23135
BEET DUMP STATION
CONSISTING OF BUT NOT LIMITED TO: (2) Drive on Truck Platforms, 80'L, Bottom Hoppers with Water Spray and Wash Flume to Rock Catcher; Railroad Rails; One Sided Metal Building with Steel Frame, Peaked Roof, Approx. 40'W x 90'L
101-23135
ROCK CATCHER/MOTOR CONTROL CENTER ROOM
CONSISTING OF BUT NOT LIMITED TO: Rock Catcher Room, Approx. 15'W x 70'L, (2) Discharge Elevators for Rock Removal, ABLE-HOWE 5-Ton I-Beam with Trolley, Beet Flume, Pump is Gone But Electric Motor is There, Estimated 100-HP; Motor Control Room, (2)-Allen Bradley Panels
102-23135
BOOSTER PUMP HOUSE
CONSISTING OF BUT NOT LIMITED TO: Metal Building, Approx. 12"W x 25'L, GOULDS 3175 4x6 14 Pump, SN 277B990, TECO 150-HP Electric Motor, Piping
103-23135
BEET WASHER AND ELEVATOR
CONSISTING OF BUT NOT LIMITED TO: Overhead Flume to Washer, Load Chute with Grizzly, Approx. 10'W x 25'L washer, (21) Sets of Center Shaft Mounted Paddles, Gear Box, KSK 200 Pump, 1966, 8", estimated 50-HP Electric Motor; RAPAT Beet Elevator, 2013, Estimated 5'W x 4'D (Only the Shell, Working Parts Were Removed); (2) Tube Water Filters; Chain Eleva
104-23135
BEET SLICERS
CONSISTING OF BUT NOT LIMITED TO: Vertical Beet Slicers, Approx. 55" Interior Diameter, Rotary Type Slicer with Segmented Blades, 100-HP Electric Motors and Gear Drives, 460 Volt; GENERAL ELECTRIC Motor Control Center, SN DJA1AT2, (3) Panels, 600-Amps
105-23135
HEAT EXCHANGERS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (8) Tube and Shell Heat Exchangers, 36" Diameter x 15'-8" Long, (240) Tubes per Shell, Various DYNATORQUE Valves
106-23135
COSSETTE CONVEYORS
CONSISTING OF BUT NOT LIMITED TO: 48"W x 50'L Ruber Belt Conveyor (No Belt), Channel Frame Type, SUMITOMO CHH-4160Y-SB-2 Gear Drive with 7.5-HP Electric Motor, On Legs; Steel Catwalks and Stairs; 48"W x Estimated 100'L Rubber Belt Conveyor (No Belt), Electric, Channel Frame Type, Bottom Catch Pan, Gear Drive and Electric Motor
107-23135
HEAT EXCHANGER
CONSISTING OF BUT NOT LIMITED TO: Plate and Frame Type, 75-Max PSI, 250 deg. F Max Working Temperature, 28-1/2" x 72" Frame, Various Piping, (5) JAMESBURY VPVL350 Valve Controllers
108-23135
CONVEYORS
CONSISTING OF BUT NOT LIMITED TO: Scroll Auger Conveyor, 36" x Estimated 50'L, Covered, Gear Drive with Estimated 100-HP Electric Motor; Rubber Belt Conveyor (No Belt), 36"W x Estimated 100'L, From Scroll to Pulp Press, Gear Drive and Electric Motor; Steel Catwalks and Stairs
109-23135
MOTOR CONTROL CENTER
CONSISTING OF BUT NOT LIMITED TO: (12) Panels, 600-Amps, Various Disconnects; (1) Square D Panel; (7) Pulp Press CFW-11 Vectrue Inverter VFD's; (4) Allen-Bradley PowerFlex 700 VFD's
110-23135
MUD "LEAF" FILTER PRESSES
CONSISTING OF BUT NOT LIMITED TO: Hydraulic Press Frame, 22'L, 24" x 24" Plastic Filter Frames, Hydraulic Power Pack, Allen-Bradley PLC Controls; Approx. 8'H x 8' Diameter Steel Tank, (2) Goulds 3VA6SEA Pumps with Estimated 30-HP Electric Motors
111-23135
CONVEYORS
CONSISTING OF BUT NOT LIMITED TO: Various Conveyors with Pulp Presses; (1) Scroll Auger Conveyor, 24" x Approx. 90'L, Covered, Gear Drive with 30-HP Electric Motor; (1) Scroll Auger Conveyor, 24" x Approx. 24" x 40'L, Gear Drive with 20-HP Electric Motor; (1) Rubber Belt Conveyor (No Belt), Channel Frame, on Legs, 20"W x Estimated 100'L, Electric M
112-23135
WELDERS
CONSISTING OF BUT NOT LIMITED TO: Various Miller and Lincoln Welders Throughout the Plant: Quantity of (12) Miller Dialarc 250 AC/DC Welding Power Source, SN's N/A; KH359953, 1997; N/A; KG287479, 1996; N/A; KJ156902, 1998; N/A; JK532291, 1989; N/A; N/A; JG037430, 1986; Quantity of (2) Miller Deltaweld 450 Constant Potential DC Arc Welder, SN's JD69
113-23135
HEAT EXCHANGERS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) 2010 Mueller AT184-B-10 Plate and Frame, SN's 1006908-1 and 1006908-2, 75 Max Work Pressure at 230 deg. F, MDMT 32; Quantity of (2) GEA FA192BK9315E Plate and Frame, SN's ENA-447 and N/A; Quantity of (3) Mueller AT184-B-10 Plate and Frame, SN's 352542, 215148, and 214975-3, 75 Max Work Pressure at 2
114-23135
MAIN LIMER TANKS, PUMPS, AND PARTS
CONSISTING OF BUT NOT LIMITED TO: Main Liner Tank, Mild Steel, Estimated 18' Diameter x 18'H (Estimated 34000 Gallons), Man Port, Insulated; Quantity of (4) XLT-X B1004FLF3USH03 Pumps, 100-HP Electric Motors; Main Limer Heater Receiver Tank, Mild Steel, Estimated 6'H x 6.5' Diameter (Estimated 1400 gallons), Cone Bottom, On Legs, Insulated; (1) Ski
115-23135
MOTOR CONTROL CENTERS/VFD DRIVES
CONSISTING OF BUT NOT LIMITED TO: (3) Panels, (9) Disconnects, 3-Phase, (4)Panels, (12) Disconnects
116-23135
PRE-LIMER TANK
CONSISTING OF BUT NOT LIMITED TO: Pre-Limer Tank, Mild Steel, Curved Bottom, Estimated 16'H x 30'L x 10'W, Center Shaft Mounted Agitator/Mixer, Belt Drive, 25-HP Electric Motor, (6) Outlet Valves
117-23135
RAW PRESS PULP TANK, HEAT EXCHANGER AND OTHER TANKS, MOTORS, PUMPS
CONSISTING OF BUT NOT LIMITED TO: Raw Press Pulp Tank, Stainless Steel, Estimated 6' Diameter x 6'H, Vertical; (2) Goulds 4" Pumps with Siemens 25-HP Electric Motors; Screened Press Pulp Water Tank, Stainless Steel, Estimated 6' Diameter x 8'H, Vertical, On Legs; (2) Goulds 3196 Pumps, 6", Siemens 60-HP Electric Motor; Mueller AT184-B-10 Plate and
118-23135
FRESH WATER TANK, TUNNEL WASHER AND OTHER TANKS, MOTORS, PUMPS
CONSISTING OF BUT NOT LIMITED TO: Fresh Water Tank, Stainless Steel, Vertical, Estimated 8' Diameter x 10'H, On Legs; (2) Rosemount Flow Valves; Manufacturer Unknown Tunnel Washer, 11" Diameter x 60"L Barrell, Stainless Shroud; (3) Goulds 3196 Pumps with 30-HP Electric Motors; Hopper/Auger, 36" x 36" Cone Bottom Hopper, Estimated 6" x 10' Auger to
119-23135
MOTOR CONTROL CENTER
(6) Panels, 600-Amps, (18) Disconnects; Quantity of (7) Allen-Bradley PowerFlex 700 Variable Fequency Drives; Electrical Panel
120-23135
ENVIROCLEAR TANK AND OTHERS
CONSISTING OF BUT NOT LIMITED TO: Enviroclear Clarifier Tank, Mild Steel, Estimated 25' Diameter x 90"D, Closed Top, Top Mounted Agitator; Equipment Under Tank Includes - Cone Bottom Tank, Mild Steel, Estimated 7' Diameter x 3'H Sides with 4' Cone, Vertical, On Legs; Dome Top and Bottom Tank, Mild Steel, Estimated 48" Diameter x 60"H, Vertical, On
121-23135
PELLET DRYERS
CONSISTING OF BUT NOT LIMITED TO: Dryer No. 1, Barrel Type, Estimated 12' Diameter x 85'L, Bigelow Liptak Furnace Enclosure, Natural Gas Fired, Burner, Ring Gear Drive with Teco 30-HP Electric Motor, Estimated 55" Blower with 20-HP Electric Motor; Westinghouse Motor Control Center, SN 19325, 1976; Industrial Machine 68M21.1 Scroll Auger Conveyor, 1
122-23135
PELLET MILLS, PELLET COOLER, ELEVATORS, AND OTHERS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (4) Pellet Mills, 125 to 150-HP Electric Motors; Quantity of (2) Bucket Elevators, 16"D x 42"W Shells, Estimated 12" Diameter x 20'L Discharge Auger; Pellet Cooler, Mild Steel Box, 60"W x 30'L, Exhaust Pipe to Roof, Bottom Discharge Conveyor, Approx. 16"W x 42'L; Gardner-Denver GGBOADA Vacuum Pump, SN S
124-23135
4MW POWER PLANT EQUIPMENT, STEAM TURBINES, A.C. GENERATORS AND OTHERS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) Steam Turbines 1957, Rated 2000-KVA, Max 2500-KVA, 3600-RPM's, Quantity of (2) Power Generators, 1957, 2500-KVA, 480-Volt, 3010-Amps, 80% Power Factor, 3600-RPMs, 125 Exciter Volts; General Electric/Westinghouse Motor Control Center, (14) Panels, Various Disconnects, Generator Panels; Reivax Control
125-23135
MAINTENANCE SHOP
CONSISTING OF BUT NOT LIMITED TO: Assembled Vertical Lathe, 4' Diameter Rotary Table; LeBlond 19" Heavy Duty Engine Lathe, 12' Bed, Tailstock, 4-Jaw Chuck, SN: NE4275; South Bend Lathe Turn-N-Ado EVS Lathe, SN: 169CK, 22" x 120" Bed, 4-Jaw Chuck, Tailstock, Tool Post; Cincinnati Bickford Radial Arm Drill, (est.) 9" Column x 4' Arm, SN: 1R404; (7) 1
126-23135
CARBONATION TANKS AND OTHERS
CONSISTING OF BUT NOT LIMITED TO: Main Carbonation Tank, Mild Steel, Vertical, Cone Bottom, Estimated 15' Diameter x 30'H, Man Entry Ports, Outlets and Inlets, Insulated; 4x6 Pump, SN PF6097-1 with Estimated 30-HP Electric Motor; Approx. 12" Pump with Estimated 50-HP Electric Motor; Various Valves and Pipes; Approx. 4' Diameter x 15'H Tank, Mild St
127-23135
DEAERATION TANK
CONSISTING OF BUT NOT LIMITED TO: Mild Steel Tank, Estimated 10' Diameter x 10'H, Insulated, Vertical, Side Outlet
128-23135
TANK AND HEAT EXCHANGER
CONSISTING OF BUT NOT LIMITED TO: Mild Steel Tank, Estimated 6' Diameter x 5'H, Vertical, On Legs; (2) Peerless 3" Pumps with 30-HP Electric Motor; APV R5M-16 Plate and Frame Heat Exchanger, SN G2011000320, 2011, 50-PSI @ 190 deg. F; Mild Steel Tank, 18" Diameter x 60"H, Top Lid, Mounted on Floor
129-23135
2ND CARBONATION FILTERS
Horizontal Filters, All Leaves For The Filters Are Removed and Not On Site, 200 deg. Max Temperature, 55" Diameter x 10'L Chamber, Stainless Steel Interior; SN's 68111084-2 and -1 Have Been Removed and Are Stored Outside
130-23135
VARIOUS HEAT EXCHANGERS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (6) Tube in Shell Heat Exchangers; (4) are Silver Juice Heater, 32" Diameter x 20'L, (168) Tubes; (2) are 30" Diameter x Approx. 15'L, (264) Tubes; Quantity of (2) ITT Plate and Frame Heat Exchangers, SN's 914815-06 and 914815-02, 2003, MAWP 150-PSI @ 302 deg. F, MDMT 432 deg. F @ 150-PSI
131-23135
CONTROL ROOM
CONSISTING OF BUT NOT LIMITED TO: Built-In Laminate Work Top, 42" x 30'L; (4) 4-Drawer Pedestals; (2) 2-Door Cabinets; 30" x 72" Metal Table, Wood Grain Laminate Top Table; (12) Plastic Lockers, 1' x 3' Each; (3) 5-Roller Base Office Chairs; 5-Roller Base Office Chair, Mesh Back, Arm Rests; (8) Scott Air-Pak, Compressed Air Tanks with E-2 Flo Regul
132-23135
VACUUM PANS
CONSISTING OF BUT NOT LIMITED TO: White Vacuum Pans; Vertical Tanks, Estimated 12' Diameter x 12'H (WP4 is 20 to 24'H), Vertical, Estimated (400) 2-1/2" x 3'L Stainless Steel Tubes in Each, Each Tank has Electrical Panel, Valves and Valve Controllers, Inlets and Outlets, Top Mounted Agitators, Falk 90Y8X2-A Gear Drive with Estimated 50-HP Electric
133-23135
VACUUM PANS
CONSISTING OF BUT NOT LIMITED TO: Low Raw Vacuum Pan, (2) High Raw Vacuum Pans, They are Vertical Tanks, Estimated 12' Diameter x 18'H, Estimated (400) 2-1/2" x 3'L Stainless Steel Tubes, Electrical Panel, Valves and Valve Controllers, Top Mounted Agitators (About 1/2 of the Agitators Have Been Removed from the Pans)
134-23135
SUGAR CONCENTRATOR
1985, 3500 Liter Capacity, 111 deg. C Temperature, Approx. 8' Diameter with Cone Top and Stack, Analog Gauges
135-23135
CONTROL ROOM
CONSISTING OF BUT NOT LIMITED TO: 8' x 10' Control Room, Personnel Door, Wires, Office Desk, 30" x 60" Table, (2) Secretarial Type Desk Chairs, (1) Stool, Orion PC Monitor
136-23135
BUCKET ELEVATOR
Enclosed Bucket Elevator, Estimated 22"D x 50"W, Galvanized Steel Construction, Drive with Electric Motor
137-23135
TANKS AND PUMPS
CONSISTING OF BUT NOT LIMITED TO: Mild Steel Dust Collector Type Unit, Approx. 8'H; Vooner LP7 Vacuum Pump, SN 71, 1991, Clockwise, Estimated 50-HP Electric Motor; Vooner Vacuum Pump, SN N/A, Estimated 50-HP Electric Motor; Estimated 50-HP Motor (Vacuum Pump with Motor is Removed); Vertical Tank, Stainless Steel, Estimated 5' Diameter x 10'H, Squar
138-23135
MOTOR CONTROL CENTER
CONSISTING OF BUT NOT LIMITED TO: (2) Panels, 600-Amps, (9) Disconnects; (2) Watch Dog Elite Bucket Elevator Monitoring Systems, SN's 1050/013/08 and 997C/019/08
139-23135
SHAKER SCREENS AND ELEVATOR
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) Rotex Shaker Screens, 42"W x 100"L, Screen Sizes - Bottom Baker Screen is 39-1/4" x 70", Bottom 16 Mesh Screen is 39/14" x 75", Top Baker Screen is 39-1/4" x 70-3/4", Top 16 Mesh Screen is 39-1/4" x 76-1/2" Vibratory Units with Electric Motors; FMC Link-Belt Bucket Elevator, Order #AK-22-3950AI, 14"
140-23135
MACHINE SYRUP TANK
Mild Steel Tank, Estimated 10' Diameter x 12'H, Blanketed, Holds 800 to 1000-Cubic Feet, Vertical, Man Port, Outlets
141-23135
HIGH GREEN TANK
Mild Steel Tank, Estimated 10' Diameter x 12'H, Blanketed, Holds 800 to 1000-Cubic Feet, Vertical, Man Port, Outlets
142-23135
STANDARD LIQUOR TANK
Mild Steel Tank, Estimated 8' Diameter x 14'H, Blanketed, Vertical, Man Port, Outlets
143-23135
BLENDER TANK
Mild Steel Tank, Estimated 8' Diameter x 8'H, Vertical, Blanketed, Various Outlets
144-23135
STANDARD LIQUOR TANK
Mild Steel Tank, Estimated 8' Diameter x 14'H, Blanketed, Vertical, Man Port, Outlets
145-23135
STANDARD LIQUOR TANK
Mild Steel Tank, Estimated 8' Diameter x 14'H, Blanketed, Vertical, Man Port, Outlets
146-23135
TANK
Stainless Steel Tank, Estimated 10' Diameter x 12'H, Outlets, Side Entry Port, Top Entry Port
147-23135
EVAPORATORS
Quantity of (2) Evaporators, 1B and 2B, Mild Steel Tanks, Estimated 10' Diameter x 30'H, Blanketed, Man Ports, Outlets, Estimated (3000) 1-1/2" x 8'L Stainless Steel Tubes in Each
148-23135
EVAPORATORS
Quantity of (2) Evaporators, 3B and 4B, Mild Steel Tanks, Estimated 10' Diameter x 20'H, Blanketed, Man Ports, Outlets, Estimated (3000) 1-1/2" x 8'L Stainless Steel Tubes in Each
149-23135
EVAPORATORS
Quantity of (2) Evaporators, 3A and 4A, Mild Steel Tanks, Estimated 10' Diameter, 3A is Estimated 18'H, and 4A is Estimated 20'H, Blanketed, Man Ports, Outlets, Estimated (3000) 1-1/2" x 8'L Stainless Steel Tubes in Each
150-23135
EVAPORATORS
Quantity of (3) Evaporators, 1A, 2A, and 5th Body, Estimated 10' Diameter x 25'H, Blanketed, Man Ports, Outlets, Estimated (3000) 1-1/2" x 8'L Stainless Steel Tubes in Each
151-23135
HEAT EXCHANGERS
Quantity of (2) Plate and Frame Heat Exchangers, 53"W x 97"H Frames, (1) is 89" Thick Plates and (1) is 66" Thick with Plates
152-23135
WEIGH SCALE
CONSISTING OF BUT NOT LIMITED TO: Batch Type Weigh Scale for Bagger, 38" x 43" x 40"H Bin, Top Mounted Hopper, Allen-Bradley PanelView 700 PLC; Van Air D-16 Compressed Air Dessicant Dryer, SN 112608, 1999
153-23135
MOTOR CONTROL CENTER
CONSISTING OF BUT NOT LIMITED TO: (11) Panels, 600, 800, and 1500-Amps, Various Disconnects, Electrical Panel (Installed in 2020)
154-23135
BAG FILLER ROOM
CONSISTING OF BUT NOT LIMITED TO: Bag Filler with Scales, Eriez Xtreme Metal Detector with Controller, Estimated 30' Fabricated Steel Frame, Catwalk and Stairs; (2) Stainless Steel Bins with Lids, 67"L x 55"W x 47"H, Bindicator Gages; (4) Estimated 12" Scroll Auger Feeders, Drives with 15-HP Electric Motor; Rotex/Elevator Control Panel; (3) Hevi-Du
155-23135
SUGAR CRYSTALLIZER
Barrel Type, Estimated 8' Diameter x 30'L, Ring Gear Driven with Approx. 30-HP Electric Motor, Has Steam Coil but It was Never Hooked Up
156-23135
SUGAR CRYSTALLIZER
Barrel Type, 106" Diameter x 30'L, New Drum Collar with Teeth, Unit Has Been Stripped, No Ring Gear, No Drive or Motor
157-23135
HIGH RAW STRIKE RECEIVER
CONSISTING OF BUT NOT LIMITED TO: Mild Steel Tub Style Tank, Estimated 10' Diameter, Shaft Mounted Mixer Paddles; Falk 80FC44 Gear Drive, SN D7-633937, 1976, with Estimated 5 to 10-HP Electric Motor
158-23135
LOW RAW VACUUM PANS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) #2 and #3 Vacuum Pans, Estimated 12' Diameter x 30'H, Mild Steel, Vertical, Insulated, Estimated 300 to 400 2-1/2" x 3'L Stainless Steel Tubes, Top Mounted Agitators; Quantity of (2) Vooner VG7S-H Vacuum Pumps, SN's 2087 and 2064, 2005, Toshiba 50-HP Electric Motors; (2) Mild Steel Tube Filters, 17"
159-23135
PIPE THREADER
Electric Pipe Machine, 1/2" to 4" Capacity, Threader, Reamer, Cut Off, Portable Stand
160-23135
CENTRIFUGES
CONSISTING OF BUT NOT LIMITED TO: Quantity of (7) White centrifuges, 1964, batch type, 48" diameter x 30"D chamber, top opening lid, 1200-RPMs, Westinghouse Sugar Centrtifuge Motor, 2-Speed, Reversible, 460-Volt, 40-HP Electric Motor, (2) Westinghouse 40-HP Spare Motors, One Centrifuge is Not Fully Installed
161-23135
CENTRIFUGE CONTROL ROOM, MOTOR CONTROL CENTER
CONSISTING OF BUT NOT LIMITED TO: Various Tables and Chairs, 42" Approx. Flat Screen Montior, Centrifuge Motor Control Center, (5) Electrical Panels, (1) Electrical Cabinet with Various PLC's, 6'W x 7'H
162-23135
CENTRIFUGES
CONSISTING OF BUT NOT LIMITED TO: Quantity of (6) Continuous Centrifuges, Estimated 47" Diameter x 30"D Chambers, top opening lid, 1200-RPMs, Estimated 75-HP Motors, 460-Volt, Frame 404T/447T
163-23135
CENTRIFUGES
CONSISTING OF BUT NOT LIMITED TO: Quantity of (4) Silver Continuous Centrifuges, Estimated 47" Diameter x 30"D Chambers, top opening lid, 1200-RPMs, Estimated 75-HP Motors, 460-Volt, Frame 404T/447T: Quantity of (2) BMA K1100 Continuous Centrifuges, 1100mm x 536mm, top opening lid, 1200-RPMs, Estimated 75-HP Motors, 460-Volt, Frame 404T/447T
164-23135
TANKS AND SCROLL AUGER
CONSISTING OF BUT NOT LIMITED TO: (1) Scroll Auger Conveyor, Estimated 12" x 60'L, Drive and Electric Motor; Quantity of (2) Melter Tanks, Mild Steel, Estimated 8' Diameter x 10'H, Top Lids, Top Mounted Agitators; (1) Paddle Mixer, Stainless Steel, U-Bottom, 5'W x 12'L, Drive and Electric Motor
165-23135
SCROLL AUGER AND MIXER
CONSISTING OF BUT NOT LIMITED TO: (1) "Low Raw Scroll" Auger Conveyor, Estimated 12" x 35'L, Toshiba 15-HP Electric Motor; Empties to Estimated 5' x 12' Stainless Steel Paddle Mixer with Drive and Electric Motor
166-23135
WET SUGAR SCROLL AUGER
CONSISTING OF BUT NOT LIMITED TO: "Wet Sugar Scroll" Auger Conveyor, Double Scroll, Estimated 20" to 24" x Estimated 45'L to 50'L; Reliance 25-HP Electric Motor (One Scroll is Missing the Motor)
167-23135
TANKS, PUMPS, VACUUM PUMPS, HEAT EXCHANGERS
CONSISTING OF BUT NOT LIMITED TO: Machinery and Equipment to Support Centrifuges, etc.; Mini Melter Pot, Mild Steel, Estimated 6' Diameter x 4'H, Top Mounted Agitator, Loading Auger, (2) Goulds Pumps with 7.5-HP Electric Motors; (4) Goulds 3196 MTX Pumps with 30-HP Electric Motors; (2) Goulds 3196 2x3 Pumps with Toshiba 40-HP Electric Motors; 2" Pu
168-23135
MOTOR CONTROL CENTERS
CONSISTING OF BUT NOT LIMITED TO: (2) Panels, 600-Amps, (7) Panels, 1200-Amps, Various Drives and Disconnects; PFOW Industries Electrical Panel for Freight Elevator
169-23135
TANKS AND PUMPS
CONSISTING OF BUT NOT LIMITED TO: Goulds MT 4x6 Pump with Estimated 40-HP Electric Motor; Quantity of (4) Condensate Receiver Tanks, Mild Steel, Estimated 36" Diameter x 4'H, On Legs; Peerless Pump with Estimated 15-HP Electric Motor; Quantity of (3) Condensate Receiver Tanks, Mild Steel, Estimated 60" Diameter x 60"H, On Legs
170-23135
MOTOR CONTROL CENTER ROOM
CONSISTING OF BUT NOT LIMITED TO: General Electric MCC, Catalog #435X316L04, (2) Panels, 600-Amps, Various Disconnects; General Electric Evolution Series E9000 MCC, Catalog #OC70X0556F01, (2) Panels, 1200-Amps, Various Disconnects; Allen-Bradley Centerline MCC, Catalog #P HKWW29/3, (6) Panels, 600-Amps, Various Disconnects; Allen-Bradley 1336 Plus
171-23135
HIGH RAW STRIKE RECEIVER TANKS, PUMPS, AND MORE
CONSISTING OF BUT NOT LIMITED TO: (1) Stainless Steel Tank, Dome Top and Bottom, Man Port, Vertical, On Legs; Mild Steel Tank, Dome Top and Bottom, Inlets and Outlets, Vertical, On Legs; Step Ladder; Steel Work Table; (2) Pumps, Estimated 3" and 4", Electric Motors; High Raw Strike Receiver Mild Steel Drum, Horizontal, Man Entry Port, Mounted on Ce
181-23135
BAG FILLER ROOM
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) Fishbein Bag Filling Stations, Estimated 36" x 36" Stainless Steel Feed Hoppers, Industrial Magnetics Metal Detecting Magnets; Dual Bag Loading Stations, 50# Bags, 5-HP Electric Motors, Bag Filler, Discharge, Inglett Fastrac V Controls; Quantity of (2) Safeline VZ Conveyor Mounted Metal Detectors, S
182-23135
PORTABLE OFFICE IN WAREHOUSE
CONSISTING OF BUT NOT LIMITED TO: 149"L x 125"W Outside Dimensions; 30" x 50" Metal Desk, Wood Grain Laminate Top, 72" x 18" Hutch; Wood Bookcase, 4-Shelves; (2) Metal 4-Drawer Filing Cabinets; (2) 5-Roller Base Office Chairs, Mesh Back; Crosley A/C Unit; Samsung 24" Monitor; Samsung 32" Monitor; Keyboard and Mouse; APC Backups 425 Battery Backup;
183-23135
WAREHOUSE OFFICES
CONSISTING OF BUT NOT LIMITED TO: Office 1: Wood Table, 30" x 60" Metal Desk with Drawers, Wood Grain Laminate Top; Metal 4-Drawer Lateral Filing Cabinet; Metal 4-Drawer Filing Cabinet; Metal 2-Drawer Filing Cabinet; Clover Water Dispenser, 5-Gallon Bottles; 5-Roller Base Office Chair, Mesh Back, Arm Rests; Fellowes Monitor Stand, Samsung 24" Monit
184-23135
WAREHOUSE WORKSHOP
CONSISTING OF BUT NOT LIMITED TO: Jet JDP-17MF Drill Press, SN: 8100004; Wilton Bench Vise; Miller Spectrum 1000 DC Plasma Cutter, Various Weld Sticks; Metal Cabinet wtih Various Nuts and Bolts; Dual End 6" Bench Grinder; 3-Jaw Chuck, Various Sheets of Steel and Angle Iron; (2) 4'W Metal Saw Horses; Roll Up Door
185-23135
DUST COLLECTORS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) Dust Collectors, (1) MAC Cyclone Type, Estimated 60" Diameter x 10'H, Cone Bottom, Schenck MD40 Airlock, SN 110382075-010-1; (1) MAC Baghouse Type, Estimated 60" x 60" x 15'H, Cone Bottom, Schenck MD40 Airlock, SN 1100458231-010-1; Both Collectors Mounted in 9' x 15' Steel Fabricated Frame, Control
186-23135
FEED HOPPER WITH AUGER
CONSISTING OF BUT NOT LIMITED TO: Hopper Feeder, Galvanized Steel Construction, 72" x 36" Hopper, Estimated 10" Diameter x 25'L Enclosed Auger, AV801-2 Gate
187-23135
CLEAN ROOM AND SUPPLY ROOM 2
CONSISTING OF BUT NOT LIMITED TO: CLEAN ROOM: 49" x 8' Steel Work Table, Wilton Bench Vise; 97"L x 3'W Metal Work Table with Undershelf; (3) Metal 6.5'T Cabinet on Casters, 2-Door; (2) Metal 6'T Cabinet on Casters, 2-Door; (2) Metal 4-Drawer Filing Cabinets; Metal 5-Drawer Filing Cabinet; Sandusky 2-Door 1/2 Cabinet on Casters; Tennsco 2-Door 1/2 C
188-23135
MISCELLANEOUS MOTORS, REDUCERS, GEARS, ETC.
CONSISTING OF BUT NOT LIMITED TO: (1) Skid with Baldor 10-HP Electric Motor, Baldor 15-HP Electric Motor; (1) Rack with Dodge Gear Reducers - (2) SCXT525B 25:56 Ratio, (1) Used SCXT525C 25:56 Ratio, (1) SCXT615 15:33 Ratio, (1) SCXT625 25:1 Ratio, (2) TXT625T 25:15 Ratio; (1) Rack with (2) Dodge TXT7A Reducers, (1) SCXT725A Reducer, (2) Dodge Reduc
190-23135
MISCELLANEOUS MACHINERY, EQUIPMENT, PARTS, ETC.
CONSISTING OF BUT NOT LIMITED TO: (1) Section of Flow Thru Pallet Racking, 9'W x 18'D x Estimated 20'H, (4) Levels, (24) Pallet Places Including Contents - (1) Box of Palletizing Belts and Rollers; (1) Box with Approx. (10) Gear Boxes, Box with (1) 20-HP Electric Motor; (2) Used Estimated 5-HP to 10-HP Electric Motors; (1) Box with (19) 3/4-HP to 2
191-23135
AUTOMATIC PALLETIZER
40" x 48" Pallets, 48"W Cross Roller Conveyor to Accumulator, Auto Stacker, Discharge Conveyor, Steel Work Catwalks and Stairs, 460-Volt
192-23135
BAGGED SUGAR CONVEYORS
CONSISTING OF BUT NOT LIMITED TO: Conveyors are Continued from Bag Filler Room: Hytrol Estimated 24"W x 185'L Rubber Bel Conveyor Up to the 90 deg. Section; Roller Conveyor to Palletizer; Hytrol 12"W x Estimated 60'L Rubber Belt Conveyor with 90 deg. Section; Squid Ink Vector XII Modular Printer with Remote Printer Head; 2-Door Electrical Panel Con
193-23135
PALLET WRAPPER
Semi-automatic, 110-Volt, 48" Rotating Table, 59" Vertical Travel, Controls
194-23135
PALLET RACKING
CONSISTING OF BUT NOT LIMITED TO: Flow Thru Type Pallet Racking, Bolt-Together and Teardrop Type, (12) Sections, (4) Deep, (3) Levels, Estimated 24'H Uprights, (288) Pallet Positions; A Second Group of Flow Thru Racking, Bolt-Together Type, (6) Pallets Wide, (6) Pallets Wide, (3) Levels High, (54) Pallet Positions
195-23135
COAL BOILERS
CONSISTING OF BUT NOT LIMITED TO: (2) Coal Fired Boilers, 100,000# Per Hour of Steam, 250-PSI, (4) Feeder Chutes
196-23135
BOILER MOTOR CONTROL CENTER
CONSISTING OF BUT NOT LIMITED TO: Siemens-Allis Motor Control Center, Part No. 9-001-60445-1, (8) Panels, 600-Amps, 480-Volts; (5) Panels, 600-Amps, 480-Volts, Various Disconnects; Siemens-Allis Transformer, 4160-Volt, with Feeder Breakers; Electrical Panel Box for Breakers, 48" x 60"
197-23135
GAS FIRED BOILER
1966, 100,000# Per Hour of Steam, 250-PSI, Natural Gas Fired, Gas Burner, Estimated 12'W x 25'L x 12'H Housing, Blower with Estimated 50-HP Electric Motor
198-23135
GAS FIRED BOILER
1962, 60000# Per Hour of Steam, 250-PSI, Natural Gas Fired, Gas Burner, Estimated 12'W x 25'L x 12'H Housing, Blower with Estimated 30-HP Electric Motor
200-23135
BLOWER FANS AND COLLECTORS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (3) Blower Fans, Estimated 96", 100-HP to 150-HP Electric Motor; Quantity of (2) Cyclone Type Collectors, Estimated 8' Diameter x 10'H, Cone Bottom; (1) Mild Steel Tank, 8' Diameter x Approx. 6'H
201-23135
PACKAGE BOILER
1993, Natural Gas Fired, 600-HP, 200-PSI, 2,510,000 Input BTUs, CB Hawks ICS Controls with Screen; CR Tank, Mild Steel, Estimated 60" Diameter x 12'L, Horizontal, Dome Ends, Mounted on Fabricated Steel Stand; Softener Polisher Water Treatment Tank, Estimated 36" Diameter x 6'H; (2) Softener Rejuvenation Tanks, Estimated 36" Diameter x 6'H, Vertical
202-23135
TANKS AND PUMPS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2) Mild Steel Tanks, Estimated 8' Diameter x 10'H, Vertical, Blanketed, Man Ports, Outlets, On Legs, Dome Bottoms; (2) Peerless 4x6 Pumps with 50-HP Electric Motor; (2) Goulds 3196 6x8 Pumps with Estimated 50-HP Electric Motors
203-23135
VARIOUS TANKS AND PUMPS
CONSISTING OF BUT NOT LIMITED TO: Sluice Tank, Mild Steel, Vertical, Estimated 6' Diameter x 12'H, Man Port, Outlets, On Legs; Sluice Mud Tank, Stainless Steel, Estimated 5' Diameter x 8'H, Vertical, Man Ports, Outlets, On Legs; Mild Steel Tank, 10' x 10' x 12'H, Mild Steel, Inlets and Outlets; (2) Pumps, 4x6, Estimated 50-HP Electric Motors; (2) P
204-23135
MOTOR CONTROL CENTER
(4) Panels, 600-Amps, Various Disconnects; (3) Electrical Boxes for Evaporator Supplies, Allen-Bradley VFD's
206-23135
MOTOR CONTROL CENTER AND VFDS
CONSISTING OF BUT NOT LIMITED TO: General Electric MCC, Catalog #204B5459, (6) Panels, 600-Amps, Various Disconnects; Allen-Bradley PanelView 700 PLC on Wall by Door; (2( General Electric 300-Line Control Cabinets, 480-VAC for CO2 Pumps; (7) WEG CFW08 Plus Vector Inverters; (2) Allen-Bradley Power Flex 700 VFD; 8' x8' Electrical Cabinet
207-23135
CO2 VACUUM PUMPS
CONSISTING OF BUT NOT LIMITED TO: Quantity of (2), 2020 and 2021, CO2 Vacuum Pump, Clockwise, Flender 46400967-0110 Gear Drive, SNs BAB501006/2020, Estimated 300-HP Electric Motors; (2) Vooner VGTC-H Vacuum Pumps (Not in Service), 2005, TEC Westinghouse 300-HP Electric Motor
208-23135
LIME HOUSE
CONSISTING OF BUT NOT LIMITED TO: Rock Hoist; Sheridan Sturtevant Crusher, 15-HP Electric Motor; Sheridan Crushed Lime Conveyor; Sheridan Raymond Mill; Crushed Lime Bin, 6' Diameter x 8'H; Sludge Tank, 5' Diameter x 8'H, (2) Pumps with 5-HP Motors; Sheridan Dorr Thickener, 6' Diameter; Finished Cooler, 10' Diameter x 6'H, 40-HP Pump; Saccharate Mix
210-23135
MAIN FLOOR BREAKROOM
CONSISTING OF BUT NOT LIMITED TO: (4) Wood Laminate 8'L Cafeteria Style Tables with Attached Benches; Metal 2-Door Cabinet, 43"T; (2) 2-Door Metal Cabinets, 6'T; (2) Mobile Carts; Standup Portable Desk Stand with 24" Monitor, Keyboard, Mouse; (2) Leather Executive Office Chairs; 2021 Frigidaire Over/Under Refrigerator/Freezer; Automatic Products St
211-23135
SECOND FLOOR OFFICE AND SUPPLY ROOM #1
CONSISTING OF BUT NOT LIMITED TO: OFFICE: (2) 30" x 60" Metal Desks with Drawers, Wood Grain Laminate Tops; Wood Bookcase, (5) Shelves; (3) Metal 4-Drawer Filing Cabinets; Metal 2-Drawer Lateral Filing Cabinet; (2) 5-Roller Base Office Chairs; Oki Microline 420 9-Pin Printer; HP LaserJet Pro 400 M401n Printer; (2) Samsung 24" Monitors, Keyboards, M
212-23135
OFFICES NEXT TO SUPPLY ROOM #1
CONSISTING OF BUT NOT LIMITED TO: Metal Racking with Various Parts, Boxes with Electrical Control Parts; 6' x 7' Electrical Control Panel; Louisville 10' Ladder; Approximately 30 Computer Monitors and Various Used Computer Accessories; Metal Tables; Lockers, (3) 5-Roller Base Office Chairs; (3) 4-Leg Stools, Back Rests, Foot Rests; A/C Unit; Small
225-23135
ORIGINAL CEMENT SUGAR SILOS
CONSISTING OF BUT NOT LIMITED TO: (4) Cement Silos, 250,000 CWT Capacity; (2) Double Bucket Elevator, 9" x 12" Galvanized Steel, Watch Dog Elevator Monitors; 17"D x 48"W Bucket Elevator, Galvanized; LinkBelt DK2565-7-23 Bucket Elevator, 17"D x 48"W; Meyer 18" x 18" Heavy Duty Motor Control Center, SN: 127759-1, (5) Panels, Various Disconnects; GE M
226-23135
AIR COMPRESSOR AND VACUUM PUMP
CONSISTING OF BUT NOT LIMITED TO: Atlas Copco GA45 Air Compressor, Elektronikon II Controls, Rotary Screw Type, Vertical Receiving Tank; Bry-Air Air Dryer, Gardener Denver DuraFlow 45 Series Vacuum Pump, 10-HP Motor, 104,986 Metered Hours
227-23135
WEIBULL STEEL SUGAR SILO
CONSISTING OF BUT NOT LIMITED TO: 110' Diameter x 60'H Silo with Cement Base, 490,000 CWT Capacity; Metal Housing with Loadout Hopper, Schenck Processess Air Lock, Champion Size 55 Blower
228-23135
NEWER CEMENT SUGAR SILOS CONSTRUCTED IN 1995
CONSISTING OF BUT NOT LIMITED TO: Quantity of (11) Concrete Silos, 1,000,000 CWT; Sidney Manufacturing 3-Person Elevator, 650# Capacity, WatchDog Elevator Controls, SN 59750; Estimated 16" Scroll Auger Convveyors to Load and Unload Each Silo, 25-HP Motors; (2) Sidney Manufacturing Bucket Elevators, SN's 79268 and 69103, WatchDog Super Elite Monitor
229-23135
STATIONARY CONVEYOR
CONSISTING OF BUT NOT LIMITED TO: Section of Stationary Conveyor; 24" x 10.5'L Rubber Belt Conveyor
230-23135
NORTH SCALE/SCALE HOUSE NEAR THICK JUICE STORAGE TANKS
CONSISTING OF BUT NOT LIMITED TO: Murphy-Cardinal 6090 SR Mechanical Level Beam Truck Scale, 10' x 90' Drive On Bed; Enclosed Scale House, Murphy-Cardinal 26 Balance Scale Read Out, SN: 43191, 60-Ton Capacity
231-23135
THICK JUICE TANK 4
CONSISTING OF BUT NOT LIMITED TO: 1998 Advance Tank & Construction Company, 110' Diameter x 48'H, 80,400-BBL Capacity; Pump House with Pump and Motor
232-23135
THICK JUICE TANKS 1-3
CONSISTING OF BUT NOT LIMITED TO: (3) Carbon Steel Tanks, 29,030-BBL Capacity,Fabricated and Erected by Gatx Tank Erection Corporation 1985, 72' Diameter x 40'H; Two are Insulated with Spray on Insulation and Welded Steel Stairways Leading to Top Mounted Catwalks That Connect the Tanks, Central Pump House With Various Sized Pumps and Motors
233-23135
SHIPPING CONTAINER
1998-Shipping Container, 40'L, Containing Shelving Units with New/Useds Parts
234-23135
STORAGE GARAGE BUILDING
CONSISTING OF BUT NOT LIMITED TO: 22' X 100'L Garage Structure with (10) Parking Stalls; Contains Various Racking, with Excess Pipe, Valves, Hoses, Pumps, Metal Conduit, etc.
235-23135
SEWER SCREEN HOUSE
CONSISTING OF BUT NOT LIMITED TO: 25' x 45' Metal Building, (3) (approx.) 25-HP Motors
236-23135
CLARIFIER AND PUMP HOUSE
CONSISTING OF BUT NOT LIMITED TO: (approx.) 90' Diameter x 16'D Steel Open Top Tank with (2) (approx.) 40'L Metal Sweeper Arms, No Gear Box
237-23135
REUSE PUMP HOUSE
CONSISTING OF BUT NOT LIMITED TO: (3) Pumps, Jet Pump, Reuse Pump, Bull Nozzle, 12"-16" Pumps with 75-100-HP Electric Motors
239-23135
SUGAR LAB
CONSISTING OF BUT NOT LIMITED TO: (2) 20-Position Built In Turn Table; Metal 2-Drawer Filing Cabinet; Discover Home Molded Top Picnic Table; (4) PIG Spill Containment Trays; HP LaserJet P1606dn Printer; Acroprint ES700 Label Printer; APC Back-Ups R5 1500 Battery Backup; Netgear FSM726 (24) Port Managed Switch; Samsung 24" Color Display, Keyboard Mo
240-23135
BEET TESTING ROOM
CONSISTING OF BUT NOT LIMITED TO: (2) Lines for Beet Testing; (2) "Top-In" Weigh Stations; (2) 18"L x 24"W x 18"D Hoppers; (2) 1967 Sterns & Rogers Sugar Beet Washer/Dryer, (4) Sections, 80-100 Samples/Hour; (2) Rice Lake 420+ Scales with Digital Readouts; (2) Avery Weightronix BS-2020-100-A0 100# Capacity Scales, 20" Platforms; Powered Overhea
241-23135
EQUIPMENT SHOP
CONSISTING OF BUT NOT LIMITED TO: Metal Work Desk; (3) Metal 4-Drawer Filing Cabinets; (2) Metal 6'T Cabinets, 2-Doors; Metal 6'T Metal Cabinet; Shelving with Miscellaneous Spare Parts, Tools, Filters, etc.; Eagle 1946x 48-Gallon Capacity Flammable Liquid Storage Cabinet; Remline (9) Drawer Tool Chest; Lincoln Idealarc TM-300/300 AC/DC Arc Welder,
242-23135
PEBBLE SILO
CONSISTING OF BUT NOT LIMITED TO: Estimated 12' Diameter x 40'T Steel Silo, Cement Control House, Merrick Genetix PLC Controls, (2) Webb 7.5HP Motors
243-23135
COKE/LIME CONVEYORS
CONSISTING OF BUT NOT LIMITED TO: (2) 24"W x (Approx.) 120'L Inclined Covered Rubber Belt Conveyors, Catwalks, (2) (Approx.) 5-Yard Hoppers
244-23135
PULP BUILDING
CONSISTING OF BUT NOT LIMITED TO: 1953 200' x 90' Metal Building, 24" x 170'L Rubber Belt Conveyor, Rafter Mounted, Catwalk, (2) Scroll Fed Bucket Elevators, 54" x 22", 8'W x 128"L Steel Hopper
245-23135
PELLET STORAGE SILO
CONSISTING OF BUT NOT LIMITED TO: 70' Diameter, 70'T Steel Clad Silo, 8,000-Ton Capacity, (2) 14'W x 24'L x 14'T Load Out Areas with Cornell Roll Up Doors
246-23135
SHIPPING CONTAINERS
CONSISTING OF BUT NOT LIMITED TO: (2) Shipping Containers, Unknown Container, SN: HDML91-212835, Filled with Various Spools and Coils of Wire; 2003 CIMC Shipping Container, SN: MSCU1979008, (2) Sections of Pallet Racking with Various Transformers, Circuit Boards, Electrical Boxes, etc.
247-23135
RAIL LOAD OUT STATION
CONSISTING OF BUT NOT LIMITED TO: Fabricated Steel Construction, 6'H Elevated Railroad Track, 200'L Open Beneath Track, Rail Car Stop; Concrete Stanchions, Walkway on Both Sides; (1) 30'L Elevated Platform Above Tracks, with Stair Access; (1) 10' Elevated Platform Above Tracks with Ladder Access; 7' Hopper with 36" x (est.) 50'L Stationary Conveyor
248-23135
PELLET LOAD OUT STATION
CONSISTING OF BUT NOT LIMITED TO: 18"W Scroll Conveyor, (est.) 20'L on (est.) 10' x 12' Fabricated Steel Stand; 20'T Bucket Elevator, 10"W Buckets; 10' Screen Drum; 4'W x 10'L Steel Hopper; Peerless Stacking Conveyor, SN: 9504, 30" x 45'L Rubber Belt, Single Axle, Truss Type, Attached Walkway
249-23135
COAL BAG HOUSE
CONSISTING OF BUT NOT LIMITED TO: Metal Silo, (est.) 30'H x 10'T Cone Bottom, MAC D40 Air Lock, SN: 160474-00-1-1, Wright Self-Dumping Hopper; 2009 Air Pro Blower Fan, SN: 17244, BIH S270 50-HP Motor; Enclosed Conveyor, (est.) 24"W x 100'L
250-23135
MOLASSES TANK WITH LOAD OUT
CONSISTING OF BUT NOT LIMITED TO: 1,900,000 Gallon Capacity Carbon Steel Tank with Cement Base, Approximately 60' Diameter x 40'H; 15' x 15' Pump House with Various Sized Pumps and Motors; 12' x 10' Valve House
251-23135
SOUTH GATE SCALES
CONSISTING OF BUT NOT LIMITED TO: (2) 10' x 70' Drive On Scale Beds, Fairbanks 90-9201 Digital Readout, SN: H42379h, 120,000# Capacity, Fairbanks FB7111 Instrument Digital Scale Readout, SN: 201680100013, 120,000# Capacity; 15' x 20' Scale House, (3) Desks, Folding Table, GE Wall A/C Unit
252-23135
EAST SCALES
CONSISTING OF BUT NOT LIMITED TO: (2) 10' x 70' Drive On Scale Beds, (2) Fairbanks FB6000 Digital Readout, SN1: 1541400200059, SN2: 131620070002, 160,000# Capacity; 12' x 16' Scale House; LaserJet Pro M4104n Printer; Epson M244A Printer, SN: QMCF004978; Samsung 22" Monitor, Keyboard, Mouse, Netgear 16-Port Switch
253-23135
STAINLESS STEEL TANKS
Stainless Steel Tanks, (est.) 10' Diameter x 12'L, 106" Legs, 3" Top Inlet, 9" Bottom Outlet, Side Manhole
254-23135
MECHANIC TRUCK
Day Cab, V345 Engine, Manual Transmission, 169" Wheel Base, 14' Metal Bed with Wood Sides, Lincoln Shield Arc SA200 Welder, SN: 42D-0-3A, 200-AMP, No Title, NOTE: Appears to Be Out of Service
255-23135
PLATE FRAME HEAT EXCHANGER
APV Company Inc. Model R-55 Plate and Frame Heat Exchanger with Stainless Steel Plates, (est.) 12'L x 7'T, Made in England
256-23135
UNDER TRAILER GRAIN TRANSFER AUGER
(Est.) 12" Diameter, 8'L Under-Trailer Transfer Augger with Electric Drive, SN:40878W
260-23135
SEED WAREHOUSE
CONSISTING OF BUT NOT LIMITED TO: 100' x 80' Metal Building; 50'L x 77.5"W x 102"T Steel Mezzanine, (est.) 45'L Undershelf; 12'T 2-Tiered Steel Rack, 77.5"W x (est.) 23'L; Various Used Motors, Conveyor Belts, Gears, Springs, Pipe Fittings, Rubber Belt Chains; GE 20/10-HP Induction Motor, SN: FH6263052; (2) Garage Doors
261-23135
AG SHOP
CONSISTING OF BUT NOT LIMITED TO: Heated 50' x 90' Metal Building with 20' x 40' Attached Building with (3) Garage Doors; Grey Mills Metal Parts Washer; Atlas Dual End 6" Pedestal Grinder, SN: 5174KF15894; 12" Dual End Pedestal Grinder, 5-HP; Black and Decker 6" Dual End Bench Grinder; 8" Heavy Duty Pedestal Grinder, 3/4-HP, SN: H4940510; Black and
262-23135
CHEMICAL WAREHOUSE/SUPPLY ROOM #3
CONSISTING OF BUT NOT LIMITED TO: Roder 4" Pump with 15-HP Motor; Pallet Racking with (80) Pallet Positions, Containing Large Assortment of Used Electric Motors, 5-HP to 300-HP, 480-Volt; (9) Skids of Used Motors, (est.) 30-HP to 200-HP; (2) 100-HP Wrapped Motors; Skid with Wrapped 400-HP Motor, 4160-Volt; (24) Sections of Steel Shelving, 42"W x 24