PELLET MILL SYSTEM

Consisting of but not necessarily limited to: Currently Configured to Produce Animal Feed/Heating Pellets, 5+-Tons Per Hour, 1800-RPMs, Elektrim SGM 300-HP Electric Motor, Frame 449T, SN 1148406; 60"L Top Mounted Feeder Auger, 3-HP Electric Motor, 182T Size; Approximately 60"L Mixer, 20-HP Electric Motor with Gear Drive, Frame 286U; Type 0-3629-23

MILLENIUM CENTRIFUGAL LIQUID CHILLER

Style E Chiller, Compressor Model YDHD-59DD, R-134A Refrigerant, 2290 Charge Pounds, York Optiview Control Panel No. 371-02264-101, SN JJR-111, Electro Mechanical Starter, Digital Controls; Condensor with (643) Tubes and Evaporator; NOTE: Unit was serviced by Bassett Industries Every Year, Recent Inspection Found the Condenser Side Needs to be Rebu

MISC. TANKS, VESSELS, LARGE NUMBER OF STAINLESS STEEL PIPE/FITTINGS AND SCRAP

Consisting of but not necessarily limited to: (1) Stainless Steel Tank, Approximately 84" Diameter x 8' Long, Cone Bottom, Corrugated Skin, Manport, 24", 18", and 6" Flanged Ports; (1) Winbco Waste Heat Scrubber 304L Stainless Steel, Approximately 12' Diameter x 39' High, Insulated with Corrugated Skin, 36", 24", and 18" Flanged Side Ports, Bottom

SUPERCHANGER HEAT EXCHANGERS

Consisting of but not necessarily limited to: 2016, (2) Disassembled Heat Exchangers, Plate Type, 48"W x 89"H Frames, No Plates, Threaded Connector Rods, 20,890 lbs. Net Weight.

HYDROCYCLONE SEPARATOR

Consisting of but not necessarily limited to: 2005, Stainless Steel Housing; (2) Stainless Steel Nozzles, 32-3/4" Diameter x 40"High, Nylon Inserts.

BLOWER PACKAGE

MAC/Roots 821500LBM Blower, SN 0705949078; Baldor 50-HP Electric Motor, Cat. No. EM4115T, Frame 326T, SN C060 1210133; Mounted on Mild Steel Stand and Frame.

HEAT EXCHANGERS

Consisting of but not necessarily limited to: (1) Model TW-108-HP-44 HEX, SN SE300, 2001, MAWP 75-PSI @ 250deg. F, 376.3 Square Feet Surface Area; (1) Model GFP-057-N-8-HP-58, SN SL280, 2005, MAWP 150-PSI @ 300deg. F, 297.85 Square Feet Surface Area, No Plates; (1) Model YFX-42-5-HJ-19, SN SE-298, 2001, MAWP 75-PSI @ 250deg. F, 81 Square Feet of Su

HEAT EXCHANGER PLATES

Consisting of but not necessarily limited to: (3) Pallets, (1) Pallet of Plates Measures 48"W x 75"H; (2) Pallets of Plates Measure 28"W x 54"H; Plates Are Used.

PALLET RACKING

Consisting of but not necessarily limited to: (2) Sections of Miscellaneous Racking; (1) Section of Welded Steel Shelf, 30"W x 30"D x 88"H; (1) Section of Pallet Racking, Teardrop Style, 48"W x 30"D x 72"H.

PUMPS AND PUMP PARTS

Consisting of but not necessarily limited to: (1) Sulzer Stainless Steel Pump, Model CPT32-8C, SN 100030413, 8", Mounted on Plate, No Motor; (1) Mounting Plate with Pump Frame; (1) Sulzer 6" x 4" Stainless Steel Pump, Mounted on Plate, No Motor.

VESSEL AND TANKS

Consisting of but not necessarily limited to: (1) Stainless Steel Vessel, Approximately 300-Gallons, Vertical, Top and Bottom Side Outlets, Insulated with Dimpled Skin, On Legs, Rosemount Transmitter; (1) Open Top Stainless Steel Tank, 24" Diameter x 40" High; (2) Sections of Stainless Steel Pipe; (1) Fluid-Quip SC-1204. Housing, SN 05GS1119, 2005,

BLOWER FAN

Consisting of but not necessarily limited to: Size 77", No Motor; (2) Sections of Ductwork, Mild Steel.

PALLET RACKING COMPONENTS

Consisting of but not necessarily limited to: Teardrop Style Components; (1) Upright, 48"W x 12'H; Approximately (40) Cross Bars of Various Lengths.

CONVEYOR

Consisting of but not necessarily limited to: Covered Type Conveyor is Dissassembled, Stainless Steel, No Belt, No Motors, 18"W Belt Capacity, (5) 10'L Sections, (2) 30"L End Sections, Cover Pieces.

MISCELLANEOUS MILD STEEL SCRAP PIECES

Consisting of but not necessarily limited to: (Does not Include Standing Frame in Photos), Approximately (18) I-Beams of Various Sizes and Lengths, Approximately (38) Pieces of Steel Pipe/Tubing of Various Sizes and Lengths; (3) Pallets of Miscellaneous Flanges of Various Sizes; Other Miscellaneous Scrap Pieces.

DUST COLLECTOR FILTER SOCKS

Consisting of but not necessarily limited to: (7) Boxes of Unused Filter Socks for a Dust Collector, Approximately 8" Diameter x 12'L Approx., Total Quantity Unknown but One Box Lists a Quantity of (40).

DUST COLLECTOR CARTRIDGES

Consisting of but not necessarily limited to: Estimated (30) Unused Dust Collector Cartridges; 6" Diameter x 40" Long.

MISCELLANEOUS CABINETS

Consisting of but not necessarily limited to: Quantity of (3) Cabinets; (1) Cabinet is 23-1/2" x 23-1/2" x 30"H with a Glass Door; (1) Cabinet is 10"D x 24"W x 36"H with a Solid Steel Door; (1) Steel Cabinet is Approximately 12"D x 24"W x 30"H.

PILLOW BLOCKS BEARINGS

Consisting of but not necessarily limited to: Quantity of (6) Model SAF520; Quantity of (5) SAFD534. Note: Appear to be New/Unused.

ROTARY AIRLOCK/FEEDER

Used MAC Rotary Air Lock Feeder; Shaft; on Skid; NOTE: Data Plate Not Visible.

PUMP STATOR

Seepex Pump Stator, HBNR, 10-1/2" Diameter x 51"Long, New/Unused.

ELECTRIC MOTOR

800-HP, Catalog No. KG8006, Frame 6808B; NOTE: Was Working When Removed But Needs to be Rebuilt, Has Bad RTD on two phases.

SELF PRIMING PUMP WITH ELECTRIC MOTOR

Gorman Rupp Ultra V Series Self Priming Pump, Model V3A60-8, SN: 1533515, Imp Dia. STD; Powered by North American Electric Premium Efficiency Explosion Proof Motor, Model XP1815, 15-HP 1,770-RPM, 230/460 Volts, 60 Hertz. New/Unused.

PUMP WITH ELECTRIC MOTOR

Flowserv Innomag Sealless Pump, Model A50-3"x1.5"x8" B474511100-BCO, SN 52197, Imp. Diameter/Max. Diameter: 7.450"/8.25", 120 GPM/45'; Powered by WEG 2.3-HP, 1,800-RPM Electric Motor.

STEEL TANK PACKAGE

Consisting of but not necessarily limited to: (6) Mild Steel Tanks, Vertical, 50" Diameter x 84" High, Estimated 700 Gallons, Top 3" Inlet, Bottom 3" Outlet, Mounted on Fork Slots, Miscellaneous Stainless Nipples, Elbows, Couplings, etc.

COMPOSITE FIBERGLASS TANKS

Consisting of but not necessarily limited to: (4) 345-Gallon Capacity, Approximately 42" Diameter x 72" High, 150-PSI Max Pressure, 150deg. F Max Temperature, Top Inlet, Bottom Outlet, Mounted on Plastic Bases, Miscellaneous Stainless Nipples, Elbows, Couplings, Valves, etc.

DISTILLATION AND EVAPORATION MOLECULAR SIEVE TANK

Sieve Set A Bottle 1, 2007, Carbon Steel, 90" Diameter Tank, 288" Long Tank Body, 7,930 Gallons, Dome Top and Bottom, Manway and Base Ring, (2) 90" Diameter 0.028" Size 304 SS Wire Mesh, 6" and 4" Bottom Outlets, (2) 10" and (1) 18" Top Outlets, Design: 75-PSI Full Vacuum, 350deg. F Temperature, Operation: 50-PSI Full Vacuum, 300deg. F Temperature,

DISTILLATION AND EVAPORATION MOLECULAR SIEVE TANK

Sieve Set A Bottle 2, 2007, Carbon Steel, 90" Diameter Tank, 288" Long Tank Body, 7,930 Gallons, Dome Top and Bottom, Manway and Base Ring, (2) 90" Diameter 0.028" Size 304 SS Wire Mesh, 6" and 4" Bottom Outlets, (2) 10" and (1) 18" Top Outlets, Design: 75-PSI Full Vacuum, 350deg. F Temperature, Operation: 50-PSI Full Vacuum, 300deg. F Temperature,

DISTILLATION AND EVAPORATION MOLECULAR SIEVE TANK

Sieve Set A Bottle 3, 2007, Carbon Steel, 90" Diameter Tank, 288" Long Tank Body, 7,930 Gallons, Dome Top and Bottom, Manway and Base Ring, (2) 90" Diameter 0.028" Size 304 SS Wire Mesh, 6" and 4" Bottom Outlets, (2) 10" and (1) 18" Top Outlets, Design: 75-PSI Full Vacuum, 350deg. F Temperature, Operation: 50-PSI Full Vacuum, 300deg. F Temperature

MOLECULAR SIEVE TANK

2002, SA 516 70 Carbon Steel, 7'-6" Diameter x 22' Tall Tank, 7,270 Approx. Gallons, Dome Top and Bottom, 20" Manway, Base Ring, 8" and 30" Top Outlets, 6" Bottom Outlet, Sieve Bead Fill Nozzle, 75-PSI / FV 320deg. F Max Allowable Pressure, Altered 4-3-18. NOTE: Unit has been removed from service since photos were taken and is now located in the W

MOLECULAR SIEVE TANK

2002, SA 516 70 Carbon Steel, 7'-6" Diameter x 22' Tall Tank, 7,270 Approx. Gallons, Dome Top and Bottom, 20" Manway, Base Ring, 8" and 30" Top Outlets, 6" Bottom Outlet, Sieve Bead Fill Nozzle, 75-PSI / FV 320deg. F Max Allowable Pressure, Altered 4-3-18. NOTE: Unit has been removed from service since photos were taken and is now located in the

MOLECULAR SIEVE TANK

2002, SA 516 70 Carbon Steel, 7'-6" Diameter x 22' Tall Tank, 7,270 Approx. Gallons, Dome Top and Bottom, 20" Manway, Base Ring, 8" and 30" Top Outlets, 6" Bottom Outlet, Sieve Bead Fill Nozzle, 75-PSI / FV 320deg. F Max Allowable Pressure, Altered 4-3-18. NOTE: Unit has been removed from service since photos were taken and is now located in the W

MOLECULAR SIEVE TANK MANIFOLD/INTERCONNECT PIPING/FITTINGS

Consisting of but not necessarily limited to: Insulated Piping Sections that Connected to the Tops of the Molecular Sieve Units Lots 27-32.

STORAGE TANK,WATER

24,000 Approx. Gallon Capacity, Manufactured by Edwards or Similar, Vertical, Fiberglass, 14? Diameter x 21? Tall Approx., Domed Top, Top and Bottom Side Outlets, 24? Approx. Side Mounted Manway, Side Mounted Safety Ladder for Top Inspection with Safety Cage. No Leaks When Removed From Service, Was in Service Approx. 20 Years.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.

IBC TOTES/TANKS 250 ESTIMATED GALLON CAPACITY

48? Long x 42? Wide x 35? High Approx., HDPE Tank Surrounded by A Galvanized Steel Cage, 4-Way Fork Lift Access, Approx. Weight 138 Lbs./Each, Triple Rinsed, Clean.